• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.3
• /
• pp.258-268
• /
• 2001

The compression method is necessarily used to send the high quality moving picture that contains a number of data in image processing. In the field of moving picture compression method, the motion estimation algorithm is used to reduce the temporal redundancy. Block matching algorithm to be usually used is distinguished partial search algorithm with full search algorithm. Full search algorithm be used in this paper is the method to compare the reference block with entire block in the search window. It is very efficient and has simple data flow and control circuit. But the bigger the search window, the larger hardware size, because large computational operation is needed. In this paper, we design the full search block matching motion estimator. Using the DCT DC values, we decide luminance. And we apply 3 bit compare-selector using bit plane to I(Intra coded) picture, not using 8 bit luminance signals. Also it is suggested that use the same selective bit for the P(Predicted coded) and B(Bidirectional coded) picture. We compare based full search method with PSNR(Peak Signal to Noise Ratio) for C language modeling. Its condition is the reference block 8$\times$8, the search window 24$\times$24 and 352$\times$288 gray scale standard video images. The result has small difference that we cannot see. And we design the suggested motion estimator that hardware size is proved to reduce 38.3％ for structure I and 30.7％ for structure II. The memory is proved to reduce 31.3％ for structure I and II.

• Restorative Dentistry and Endodontics
• /
• v.32 no.4
• /
• pp.343-355
• /
• 2007

The objectives of this study was to evaluate the durability of 4 resin cements by means of microtensile bond strength test combined with thermocycling method and fractographic FE-SEM analysis. Experimental groups were prepared according to thermocycling (0, 1,000, 5,000) and the kind of resin cements, those were Variolink II, Multilink, Panavia F 2.0, Rely X Unicem. Flat dentin surfaces were created on mid-coronal dentin of extracted third molars. Then fresh dentin surface was grounded with 320-grit silicon carbide abrasive papers to create uniform smear layers. Indirect composite block (Tescera, Bisco Inc., Schaumburg, IL, USA) was fabricated ($12\;{\times}\;12\;{\times}\;6\;mm^3$). It's surface for bonding to tooth was grounded with silicon carbide abrasive papers from 180- to 600-grit serially, then sandblasted witk $20\;-\;50\;{\mu}m$ alumina oxide. According to each manufacturer's instruction, dentin surface was treated and indirect composite block was luted on it using each resin cement. For Rely X Unicem, dentin surface was not treated. The bonded tooth-resin block were stored in distilled water at $37^{\circ}C$ for 24 hours. After thermocycling, the bonded tooth-resin block was sectioned occluso-gingivally to 1.0 mm thick serial slabs using all Isomet slow-speed saw (Isomet, Buehler Ltd, Lake Bluff, IL, USA). These sectioned slabs were further sectioned to $1.0\;{\times}\;1.0\;mm^2$ composite-dentin beams. The specimens were tested with universal testing machine (EZ-Test, Shimadzu, Japan) at a crosshead speed of 1.0 mm/min with maximum load of 500 N. The data was analyzed using one-way ANOVA and Duncan's multiple comparison test at $p\;{\leq}\;0.05$ level. Within the limited results, we conclude as follows; 1. The bond strength of Variolink II was evaluated the highest among experimental groups and was significantly decreased after 1,000 thermocycling (p < 0.05). 2. The bond strength of Multilink was more affected by thermocycling than the other experimental groups and significantly decreased after 1,000 thermocycling (p < 0.05). 3. Panavia F 2.0 and Rely X Unicem showed the gradually decreased tendency of microtensile bond strength according to thermocycling but there was no significant difference (p > 0.05). 4. Adhesive based-resin cements showed lower bond strength with or without thermocycling than composite based-resin cements. 5. Variolink II & Multilink showed high bond strength and mixed failure, which was occurred with a thin layer of luting resin cement before thermocycling and gradually increased adhesive failure along the dentin surface after thermocycling. The bonding performance of resin cement can be affected by application procedure and chemical composition. Composite based-resin cement showed higher bond strength and durability than adhesive based-resin cement.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.21 no.2
• /
• pp.102-110
• /
• 2017

In this paper, the liquid oxygen filling system (LOXFS) of the launch complex system of Korea Space Launch Vehicle-II (KSLV-II) is introduced based on critical design result by KARI in 2015 to 2016. The function and specification of the main systems of the liquid oxygen filling system, such as the storage tank, the drainage tank, the supply pumping system, the curved heat exchanger with liquid nitrogen, end valve block system, and umbilical connection, are presented.

• Genomics & Informatics
• /
• v.5 no.4
• /
• pp.188-193
• /
• 2007

The Functional Element SNPs Database (FESD) categorizes functional elements in human genic regions and provides a set of single nucleotide polymorphisms (SNPs) located within each area. Users may select a set of SNPs in specific functional elements with haplotype information and obtain flanking sequences for genotyping. Our previous version of FESD has been improved in several ways. We regenerated all the data in FESD II from recently updated source data such as HapMap, UCSC GoldenPath, dbSNP, OMIM, and $TRANSFAC^{(R)}$. Users can obtain information about tagSNPs and simulate LD blocks for each gene from four ethnicities in the HapMap project on the fly. FESD II employs a Java/JSP web interface for better platform portability and higher speed than PHP in the previous version. As a result, FESD II provides its users with more powerful information about functional element SNPs of human ethnicities.

• Journal of Welding and Joining
• /
• v.18 no.5
• /
• pp.105-111
• /
• 2000

The wear behavior of thermal sprayed AlSiMg-40TiC composite coatings were studied as a function of load and sliding velocity under unlubricated conditions. Experiments were performed using a block-on-ring(WC-6wt%/Co, Hv 1500) type. The tests were carried out a various load(30∼ 125.5N) and sliding velocity(0.5∼2.0m/s). Three wear rate regions were observed in the AlSiMg-40TiC composite coatings. The wear rate in region I at low load (less then 8N( were less than 1×{TEX}$10^{-5}${/TEX}㎣/m. Low wear rates in region I resulted from the load-bearing capacity of TiC particles. The transition from region I to II occurred when the applied load exceeded the fracture and pull-out strength of the particles. The TiC fractured particles trapped between the specimen and the counterface acted as third-body abrasive wear. The subsurface layer worn surface in region II was composed of the mechanically mixed layer (MML). The wear rate increase abruptly above a critical load (region III). The high wear rate in region III was induced by frictional temperature and involves massive surface damage.

• The Journal of Internal Korean Medicine
• /
• v.43 no.2
• /
• pp.274-282
• /
• 2022

Introduction: This study reports the effect of herbal medicine (Samulanshin-tang-gamibang) and acupuncture on complete atrioventricular (AV) block. Case presentation: A 63-year-old female with complete AV block was experiencing dyspnea, palpitation, dizziness, headache, bradycardia, and insomnia, and she was treated with Samulanshin-tang-gamibang and acupuncture for 12 days. To evaluate the treatment, a numeric rating scale (NRS) and the New York Heart Association (NYHA) functional classification was used. The patient's NRS scores decreased from 6 to 2 for dyspnea and palpitation and from 5 to 1 for dizziness and headache. Her NYHA Class improved from Class II to Class I. No side effects were observed during treatment. Conclusion: This study suggests that herbal medicine and acupuncture may be effective in relieving symptoms caused by complete AV block. However, the long-term effects of the treatment were not observed, and so further studies are still needed.

• Journal of Communications and Networks
• /
• v.7 no.3
• /
• pp.243-247
• /
• 2005

We propose an efficient block least-mean-square (BLMS) adaptive algorithm, in conjunction with error control coding, for direct-sequence code division multiple access (DS-CDMA) systems. The proposed adaptive receiver incorporates decision feedback detection and channel encoding in order to improve the performance of the standard LMS algorithm in convolutionally coded systems. The BLMS algorithm involves two modes of operation: (i) The training mode where an uncoded training sequence is used for initial filter tap-weights adaptation, and (ii) the decision-directed where the filter weights are adapted, using the BLMS algorithm, after decoding/encoding operation. It is shown that the proposed adaptive receiver structure is able to compensate for the signal-to­noise ratio (SNR) loss incurred due to the switching from uncoded training mode to coded decision-directed mode. Our results show that by using the proposed adaptive receiver (with decision feed­back block adaptation) one can achieve a much better performance than both the coded LMS with no decision feedback employed. The convergence behavior of the proposed BLMS receiver is simulated and compared to the standard LMS with and without channel coding. We also examine the steady-state bit-error rate (BER) performance of the proposed adaptive BLMS and standard LMS, both with convolutional coding, where we show that the former is more superior than the latter especially at large SNRs ($SNR\;\geq\;9\;dB$).

• Journal of Mechanical Science and Technology
• /
• v.19 no.2
• /
• pp.655-663
• /
• 2005

Tribological characteristics in the sliding parts of oil hydraulic piston pumps are very important in increasing overall efficiency. In this study, the fluid film between the valve plate and the cylinder block was measured by using a gap sensor and the mercury-cell slip ring unit under real working conditions. To investigate the effect of the valve shape, we designed three valve plates each having a different shape. One of the valve plates was without bearing pad, another valve plate had bearing pad and the last valve plate was a spherical valve plate. It was noted that these three valve plates observed different aspects of the fluid film characteristics between the cylinder block and the valve plate. The leakage flow rates and the shaft torque were also investigated in order to clarify the performance difference between these three types of valve plates. From the results of this study, we found that the spherical valve plate estimated good fluid film patterns and good performance more than the other valve plates in oil hydraulic axial piston pumps.

• The Korean Journal of Pain
• /
• v.7 no.2
• /
• pp.205-210
• /
• 1994

The effects of either clonidine or epinephrine into local anesthetics administered into brachial plexus sheath were evaluated in 42 patients who underwent surgery of the upper limb. All patient received 0.5 ml/kg of 2:1 mixture of bupivacaine and lidocaine injected into the brachial plexus sheath, using the subclavian perivascular technique. The patients were randomly allocated into two groups; Group I(n=25) received $150{\mu}g$ of clonidine hydrochloride, and Group II(n=27) received $200{\mu}g$ of epinephrine. The duration of analgesia and the degree of sedation reflecting the systemic effect of clonidine were assessed. The block produced by the addition of clonidine was longer($100.3{\pm}469.8$ vs $648.8{\pm}192.1$ min) and superior to that by epinephrine(p < 0.05). The highest degree of sedation was achieved about 20 minutes after block, which roughly equals the time required for intramuscular clonidine to show the similar effect. The author concludes that the injection of clonidine mixed to local anesthetics into the brachial plexus sheath prolongs analgesia than that of epinephrine, but this prolongation may be due to the systemic effect of clonidine.

• Macromolecular Research
• /
• v.17 no.2
• /
• pp.72-78
• /
• 2009

Size control of therapeutic carriers in drug delivery systems has become important due to its relevance to biodistribution in the human body and therapeutic efficacy. To understand the dependence of particle size on the formation condition during nanoprecipitation method, we prepared nanoparticles from biodegradable, amphiphilic block copolymers and investigated the particle size and structure of the resultant nanoparticles according to various process parameters. We synthesized monomethoxy poly(ethylene glycol)-poly($\varepsilon$-caprolactone) block copolymer, MPEG-PCL, with different MPEG/PCL ratios via ring opening polymerization initiated from the hydroxyl end group of MPEG. Using various formulations with systematic change of the block ratio of MPEG and PCL, solvent choice, and concentration of organic phase, MPEG-PCL nanoparticles were prepared through nanoprecipitation technique. The results indicated that (i) the nanoparticles have a dual structure with an MPEG shell and a PCL core, originating from self-assembly of MPEG-PCL copolymer in aqueous condition, and (ii) the size of nanoparticles is dependent upon two sequential processes: diffusion between the organic and aqueous phases and solidification of the polymer.