• Asian-Australasian Journal of Animal Sciences
• /
• v.13 no.5
• /
• pp.630-635
• /
• 2000

Previous research has not evaluated the effects of various rates and frequencies of manure application and frequencies of cutting on yield and stand persistence of cool-season grasses and alfalfa-grass mixtures. The primary objective of this study was to compare the effects of cutting management systems on herbage yield and stand persistence of orchardgrass (Dactylis glomerata L.) and an alfalfa (Medicago sativa L.)-orchardgrass mixture from various rates and frequencies of dairy slurry application. A randomized complete block design with treatments in a sub-subplot arrangement with four replicates was used. The main plot consisted of 2 cutting management systems (4 and 5 annual cuttings). The subplots were 9 fertility treatments: 7 slurry rate and frequency of application treatments, one inorganic fertilizer treatment, and an unfertilized control. The split-split-plots were the two forage species: orchardgrass and alfalfa-orchardgrass mixture. The study was initiated after 1st cutting in 1995. Cumulative yields of the 2nd and subsequent cuttings of both orchardgrass and alfalfa-orchardgrass in 1995 were higher for the 5-cutting system than the 4-cutting system. The 1995 growing season was abnormally dry. In 1996, an abnormally wet year, the reverse was true, total herbage yields being higher for the 4-cutting system than the 5-cutting system. Species response to fertility rate/frequency treatments was different in both years. Higher application rates early in the season and carryover of nutrients from late season applications the previous year appear to be responsible for the yield increases of those fertility treatments having significant yield differences between the cutting management systems. The stand ratings of orchardgrass were not affected by cutting management. In the spring of 1997, however, the stand ratings of alfalfa-orchardgrass in the 4-cutting management system were significantly greater than the 5-cutting management system. The very high manure application rate significantly reduced the stand ratings of alfalfa-orchardgrass in the 5-cutting system.

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.1
• /
• pp.31-34
• /
• 2006

The experiment was conducted to determine the effects of cutting interval and cutting height on the yield and nutrient composition of hedge lucerne (Desmanthus virgatus) when grown on a sandy soil in the Northeast of Thailand. The cutting intervals compared were 30, 40 and 50 days between harvests and the cutting heights 30, 40 and 50 cm above ground level. The experiment was a $3{\times}3$ factorial layout in a randomized complete block design with 4 replications-giving a total of 36 plots each $3{\times}3m^2$. Harvested plant material was weighed, dried and the ground subsamples taken for analyses of crude protein (CP), crude fiber (CF), ash, ether extract (EE) and nitrogen-free extract (NFE). At the last harvest the hedge lucerne samples were separated to determine leaf to stem ratios and then analyzed for nutrient composition in the leaf and stem. Results showed that increasing the cutting interval (i.e. advancing age of maturity) increased dry matter and nutrient yields significantly. In terms of nutrient content, it also increased the crude fiber, ash, ether extract and nitrogen free extract percent in the plant. However, crude protein percent was markedly decreased as the cutting interval increased. Increasing cutting height had no effect on dry matter yield and yields of nutrients, but in terms of nutrient content, it increased crude protein and ash content, but decreased crude fiber content. The percent EE and NFE in the plant was unaffected by cutting height. From the results presented it is clear that cutting a stand of hedge lucerne every 40 to 50 days will achieve greater dry matter and nutrient yields than cutting more frequently, at 30 days. The cutting height at harvest, whether 30, 40 or 50 cm above ground level had no effect on dry matter or nutrient yields of hedge Lucerne. Hedge lucerne therefore offers the Thai poultry farmer a useful alternative protein supplement for poultry diets rather than relying on the more expensive soybean meal. As it can be readily and successfully grown on a range of soil types and climates throughout Thailand, hedge lucerne also offers the Thai farmer a valuable additional source of income.

• Journal of Ecology and Environment
• /
• v.35 no.3
• /
• pp.235-242
• /
• 2012

Mikania micrantha, a neo-tropical vine, is spreading rapidly in the tropical part of Nepal and is now threatening the rural ecosystem including biodiversity and rural livelihoods. However, no attempt has been made to control the spread of M. micrantha. As a result, the vines are spreading freely and rapidly. After a thorough literature review and assessment of forest management practices, we proposed a manual cutting method, as it suits the Nepalese situation for several reasons: required labor is readily available, as local communities are managing forest patches, and the method does not have any potential adverse effects on non-target native species. Experimental plots were laid out in August 2011 to examine the effectiveness of manual cutting. Two different site types based on canopy coverage were selected and divided into three blocks based on cutting strategy. Four treatments were assigned across the experimental plots following a complete block design. We harvested above-ground biomass according to the assigned treatment. The results suggested that there should be at least two consecutive cuttings within a 3-week interval before flowering, and that three consecutive cuttings resulted in 91% mortality of the vines. In addition, cutting promoted regeneration of native plant species. Employing regular cutting operations can modify understory shade enhancing regeneration of native species, which is a desirable condition to constrain proliferation of M. micrantha. Periodic cuttings reduced the competitiveness of M. micrantha regardless of canopy openness, but native ground cover should be retained.

• Korean Journal of Organic Agriculture
• /
• v.3 no.1
• /
• pp.71-78
• /
• 1994

This experiment was conducted to investigate the effects of mixed application of earthworm cast and N-fertilizer on dry matter(DM) yield in orchardgrass(Dactylis glomerate L.). Experimental plot were designed by a randomized block design with 3 replications of six different treatments-Control(0:0), 100% earthworm cast(0:100), 3 levels of mixed application(25:75:, 50:50, 75:25) of earthworm cast and N-fertilizer, and 100% N-fertilizer(100:0)based on content (%) of nitrogen. The experiment was carried out from March to October, 1993, on the forage experimental field of Kon-Kuk Univ. in Seoul. The results obtained are summarized as follows: 1. Annual dry matter yield was significantly increased according to increasing of N-fertilizer 2. Dry matter yield for each treatment as cutting time was passing was decreased. However, dry matter yield was slightly increased at 75%, 50%, and 25% mixed application of earthworm cast at the third cutting time than the second cutting time(p<0.05). 3. concerning each treatment per cutting time, dry matter yield was higher at 100% N fertilizer than the other treatments at the first, second, and fourth cutting time except the third cutting time only(p<0.05). And according to decreasing of mixing ratio of N fertilizer, dry matter yield was decreased, too. 4. Dry matter yield of 100% earthworm cast was significantly higher than control at the fourth cutting time(p<0.05).

• Design & Manufacturing
• /
• v.8 no.1
• /
• pp.27-30
• /
• 2014

Alloy tool steel such as SKD11 and SKD61 or high speed tool like SKH51 are used as materials for semiconductor dies. Cavities, curl blocks, pot blocks and housings are made from those materials. To make those parts from alloy tool steel or high speed tool, one utilizes discharge machining, and mechanical machining including machining center, milling, drilling, forming grinding and others. In the process of cutting machining and polishing, the die materials become unsuitable for machining owing to bubbles and foreign substances in them, which hinders production process. Therefore, this study focuses on die material selection criteria, and on analysis and comparison of material characteristics to help companies to solve their problems, make die manufacture less burdensome and extend die life.

• Journal of the Korean Society for Precision Engineering
• /
• v.22 no.4
• /
• pp.194-202
• /
• 2005

The objective of this paper is to develop a multi-functional hotwire cutting system (MHC) using EPS-foam block or plate as the working material. Because the MHC apparatus employs a four-axis synchronized hotwire cutter with the structure of two XY movable heads and a turntable, it allows the easy fabrication of various 3D shapes, such as (1) an axisymmetric shape or a sweeping cross-sectioned pillar shape using the hot-strip in the form of sweeping surface and EPS foam block on the turntable, (2) a polyhedral complex shape using the hotwire and EPS foam block on the turntable, and (3) a ruled surface approximated freeform shape using the hotwire and EPS foam plate. In order to examine the applicability of the developed MHC apparatus, an axisymmetric shape, a polyhedral shape and a large-sized freeform shape were fabricated on the apparatus.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2021.05a
• /
• pp.271-272
• /
• 2021

The maintenance and repair work of sidewalk block pavement is a construction that requires a large amount of budget to be invested every year. It is important to establish an appropriate standards for estimating construction cost to ensure proper budgeting and quality. In this study, the standards for estimating the cost of maintenance and construction work for sidewalk blocks that can be applied to the construction volume classified according to the site conditions, construction type, and equipment use differentiated from new construction was established. As a result, the daily construction volume was presented by reflecting excavator and truck as equipment in the combination of paver and common worker. The re-installation was applied by separating the construction volume of sections with general blocks and induction/raised blocks based on the installation of sidewalk blocks after demolition. Generally if block cutting is necessary, the precision construction conditions using a cutting machine were taken into consideration to secure the construction quality. In addition, it has been revised to apply classified construction volume into A and B-Type depending on the park and site conditions.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.3
• /
• pp.8-15
• /
• 2005

A new measuring method for tool deflection has been developed when sculptured surface is processed in ball-end milling. Since the vibration due to cutting forces has low frequencies, an electromagnetic sensor is used for measuring the exact vibration displacement. The amplitude and direction of vibration displacement during the cutting process is presented as orbital plot. In this study, it assumes that the vibration displacement is proportional to the length of cutting chip. Therefore, tool deflection is calculated by summing up the vibration displacement of unit chip length for engaged chip length. In addition, computer programs has been developed to predict the deflection of tools when machining sculptured surface. This developed program predicts the tool deflection per block of NC data, so that it can easily identify the parts which have the possibility of machining errors.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.05a
• /
• pp.767-770
• /
• 2000

A novel process is newly developed for building RP(Rapid Prototyping) parts using a sheet lamination technique. The build process of existing sheet lamination type RP machines consists of the following steps : feeding, lamination and cutting. In this process, the laminated part of an object is often scratched by a cutter or damaged by a laser beam due to the cutting operation preceded by lamination, In addition, decubing of the unused portion from the laminated block is difficult. In the new process, cutting operation is performed before lamination. The cutting operation takes place while a paper sheet is firmly attached on the plate using electrostatic force. Then liquid glue is applied to the calculated region of the given contour for lamination. The process aims to manufacture a $2k RP machine, what we call the Freeform Mater I, that can use A4 or latter-size used papers. A prototype machine that demonstrates the design concept is built and further research issues are discussed.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.7 no.2
• /
• pp.87-91
• /
• 1987

This study was carried out to investigate the effects of different cutting times at 0, 10 and 20 days after lodging on the percentage of dead plants and bare ground, live and dead matter build-up, and botanical composition of orchardgrass dominated pasture during the mid summer season. For the test, a randomized block design with 3 replications was treated with 3 different cutting times (July 17, July 27 and Aug. 6). The results obtained are summarized as follows: 1. The percentage of dead plants with cutting times at 0, 10 and 20 days after lodging was 26.3,41.7 and 46.7'%, respectively. 2. The percentage of bare ground with cutting times at 0, 10 and 20 days after lodging was 13.3,26.7 and 3 1.7%, respectively. 3. Dead matter build-up with cutting times at 0, 10 and 20 days after lodging was increased significantly with later cutting (p<0.05). The ratio of live and dead matter build-up with cutting times at 0, 10 and 20 days after lodging was 90.2:9.8, 47.7:52.3 and 39.1:60.9%, respectively. 4. Regrowth yield after lodging was decreased significantly (p<0.05) with later cutting time. 5. The percentage of legumes in botanical composition was increased greatly with later cutting time. The ratio of grasses and legumes with cutting times at 0, 10 and 20 days after lodging was 77.8:21.6,45.5: 50.3 and 36.5:61.7%, respectively.