• Title/Summary/Keyword: Block

Search Result 14,807, Processing Time 0.039 seconds

The Risk Assessment of Carbon Monoxide Poisoning by Gas Boiler Exhaust System and Development of Fundamental Preventive Technology (가스보일러 CO중독 위험성 예측 및 근원적 예방기술 개발)

  • Park, Chan Il;Yoo, Kee-Youn
    • Journal of the Korean Institute of Gas
    • /
    • v.25 no.3
    • /
    • pp.27-38
    • /
    • 2021
  • We devised the system to automatically shutdown the boiler and to fundamentally block the harmful gases, including carbon monoxide, into the indoor when the exhaust system swerves: (1) The discharge pressure of the exhaust gas decreases when the exhaust pipe is disconnected. The monitoring system of the exhaust pipe is implemented by measuring the output voltage of APS(Air Pressure Sensor) installed to control the amount of combustion air. (2) The operating software was modified so that when the system recognizes the fault condition of a flue pipe, the boiler control unit displays the fault status on the indoor regulator while shutting down the boiler. In accordance with the ventilation facility standards in the "Rules for Building Equipment Standards" by the Ministry of Land, Infrastructure and Transport, experiments were conducted to ventilate indoor air. When carbon monoxide leaked in worst-case scenario, it was possible to prevent poisoning accidents. However, since 2013, the number of indoor air exchange times has been mitigated from 0.7 to 0.5 times per hour. We observed the concentration exceeding TWA 30 ppm occasionally and thus recommend to reinforce this criterion. In conclusion, if the flue pipe fault detection and the indoor air ventilation system are introduced, carbon monoxide poisoning accidents are expected to decrease significantly. Also when the manufacturing and inspection steps, the correct installation and repair are supplemented with the user's attention in missing flue, it will be served to prevent human casualties from carbon monoxide poisoning.

Convergence study of comparison of blue light blocking rate between colored lenses of various colors and dental tips (다양한 색상의 착색렌즈와 치과용 팁의 청광차단율 비교의 융합적 연구)

  • Lee, Sook-Jeong
    • Journal of the Korea Convergence Society
    • /
    • v.12 no.7
    • /
    • pp.61-67
    • /
    • 2021
  • The purpose of this study was to investigate the colors of spectacle lenses that would be effective in blocking blue light among various colors so that the damage caused by blue light could be conveniently reduced even in daily life and when filling with dental light-curing resin. Each color dye of orange, brown, gray, yellow, red, and rosa was dissolved in an individual container of a spectacle lens tinting machine, and 6 uncolored spectacle lenses were immersed in a temperature of 90℃ for 1 hour to color. As a result of comparing the blue light transmittance of the colored spectacle lens and the tip for the photopolymerizer, the blue light transmittance of the orange colored lens was 0.82%, and the blue light blocking effssect was the best. Brown and gray tinted lenses had excellent blue light blocking rate, but it was difficult to recognize objects through the lens due to the high tinted concentration, and yellow tinted lenses were found to be effective when the tint was similar to the tip. The blue tinted lens had a blue light transmittance of 15.10%, which was lower than other tinted lenses. The results of the experimental study are expected to be helpful in recognizing the blue light transmittance by spectacle tinted lenses of various colors and making efforts to select the appropriate blue light blocking lens color and block harmful blue light stimuli.

A Study on the Connective Validity of Technology Maturity and Industry for Core Technologies based on 4th Industrial Revolution (4차 산업혁명 기반 핵심기술에 대한 기술성숙도와 산업과 연계 타당성 연구)

  • Cho, Han-Jin;Jeong, Kyuman
    • Journal of the Korea Convergence Society
    • /
    • v.10 no.3
    • /
    • pp.49-57
    • /
    • 2019
  • The core technology development of the Fourth Industrial Revolution is linked to the development of other core technologies, which will change the industrial structure in the future and create a new smart business model. In this paper, tried to analyze the technology maturity level and analyze the technology maturity. To do this, used technology trend information to investigate and integrate the market, policy, etc. Of core technology of the 4th Industrial Revolution to achieve a comprehensive maturity level. Because technology maturity measures are scored by technology developers, prejudices may be acted upon according to a person's tendency, which may be a subjective evaluation. It is also a measure of the maturity of individual technologies, and thus is not suitable for evaluating the overall system integration perspective. However, it is possible to evaluate the maturity before integrating the core element technologies constituting the whole system and to use it as a means to compare the effect of the whole system and its feasibility and play an important role in the planning of technology development.

A Comparison on Dry Matter Yield and Feed Value of Winter Forage Crops Cultivated after Rice Harvest in the Central Inland Region (중부내륙지방에서 벼 수확 후 재배한 월동 사료작물들의 생산성 및 사료가치 비교)

  • Lee, Sang Moo
    • Journal of The Korean Society of Grassland and Forage Science
    • /
    • v.39 no.1
    • /
    • pp.31-38
    • /
    • 2019
  • This study was carried out to investigate the growth characteristics, yield, and chemical compositions of winter forage crops cultivated after rice harvest in the central inland region. The experimental design was arranged in a randomized block design with three replications. The treatments consisted of 4 species (Rye, Oat, Triticale and Italian ryegrass), and varieties were "Marton", "Donghan", "Shinyoung" and "Kowinnearly", respectively. As a result, dry matter yield and TDN yield were higher in rye than in the other winter forage crops, and lowest in Oat(p<0.05). Crude protein and crude fat content were significantly higher in Italian ryegrass(p<0.05). However, Crude ash and ADF content did not show significant difference among winter forage crops. NDF content was higher in order of Rye > Triticale > Oat > Italian ryegrass(p<0.05). TDN and total amino acid content (EAA+NEAA) were higher in order of winter forage crop with high crude protein content (Italian ryegrass > Oat > Triticale > Rye). Total mineral content was higher in order of Rye > Triticale > Oat > Italian ryegrass(p<0.05), and total free sugar content was higher in order of Oat > Italian Ryegrass > Triticale > Rye(p<0.05). Compared with the results above, Italian ryegrass and Oat are high in crude protein, TDN, amino acid and free sugar content. Rye and Triticale have the merit that feed value is decreased but high yield(dry matter and TDN yield) can be maintained. Therefore, it is advantageous to grow Rye and Triticale as winter forage crops after rice harvest in the central inland region.

In vitro CaCO3 Crystallization at Room Temperature and Atmospheric Pressure Using Recombinant Proteins GRP_BA and GG1234 (재조합단백질 GRP_BA 및 GG1234를 이용한, 상온상압조건에서의 In vitro 탄산칼슘 결정화)

  • Son, Chaeyeon;Song, Wooho;Choi, Hyunsuk;Choi, Yoo Seong
    • Korean Chemical Engineering Research
    • /
    • v.57 no.2
    • /
    • pp.205-209
    • /
    • 2019
  • The exquisite structure and attractive biological properties of biominerals have great potential and increased interest for use in a wide range of medical and industrial applications. Calcium carbonate biomineralization, mainly controlled by shell matrix proteins, has been used as a representative model to understand the biomineralization mechanism. In this study, in vitro calcium carbonate crystallization was carried out under room temperature and atmospheric pressure using recombinant shell matrix protein GRP_BA and artificial shell matrix protein GG1234. Both proteins inhibited the growth of typical rhombohedral calcite crystals in the calcium carbonate crystallization using $CaCl_2$ solution and $(NH_4)_2CO_3$ vapor, and spherulitic calcite crystals with rosette-like structures were synthesized in both the presence of GRP_BA and GG1234. These results might be caused by the properties of block-like domain structure and intrinsically disordered proteins. We expect that this study can contribute to enhance understanding of the calcium carbonate biomineralization controlled by shell matrix proteins.

Development of optimal cross-section design methods for bored utility tunnels: case study of overseas typical cross-sections and design criteria (터널식 공동구 최적단면 설계기술 개발: 해외 표준단면 사례 및 설계기준 분석)

  • Park, Kwang-Joon;Yun, Kyoung-Yeol
    • Journal of Korean Tunnelling and Underground Space Association
    • /
    • v.20 no.6
    • /
    • pp.1073-1090
    • /
    • 2018
  • Since the domestic utility tunnels were built mainly in the development project of the new city, they are all in the form of cut-and-cover box tunnel. But, in the case of overseas construction of utility tunnels for existing urban areas, the bored tunnel types are mainly adopted. It is reasonable to install bored tunnels in a downtown area because it is difficult to block the roads or install bypass roads due to heavy traffic and civil complaints. In order to activate the utility tunnels in bored type, it is necessary to secure optimized cross-sectional design technology considering the optimal supplying capacity and mutual influencing factors (Thermal Interference, electrolytic corrosion, efficiency of the maintenance, etc.) of utilities (power cables, telecommunication cables, water pipes, etc.). The optimal cross-section design method for bored utility tunnels is ultimately to derive the optimal arrangement technique for the utilities. In order to develop the design methods, firstly, the cases of tunnel cross-section (Shield TBM, Conventional Tunneling) in overseas shall be investigated to analyze the characteristics of the installation of utilities in the section and installation of auxiliary facilities, It is necessary to sort out and analyze the criteria related to the inner cross-section design (arrangement) presented in the standards and guidelines.

Calligraphy Style in the Early Joseon Period : An Examination of Renowned Calligraphy of Korea (《해동명적》을 통해 본 조선 초기 서풍)

  • Yoo, Jibok
    • Korean Journal of Heritage: History & Science
    • /
    • v.52 no.1
    • /
    • pp.148-169
    • /
    • 2019
  • The purpose of this paper is to understand characteristics and trends of calligraphy styles through the analysis of handwriting. Renowned Calligraphy of Korea (海東名迹, Haedong Myeongjeok) is the first collection of famous Korean calligraphers' masterpieces and was published by Shin Gongje (申公濟, 1469-1536) in the early sixteenth century. While my previous studies have focused on analyzing the publishing backgrounds of and differences among the wood block editions and stone-carved editions of the various remaining copies of Renowned Calligraphy of Korea, this study examines the calligraphy style in the early Joseon period as represented within the collection itself. This study tries to identify the aspects of style transitions among two categories of calligraphy: (1) the calligraphy style of scribes who were in charge of documentation in the central administrative institutions (館閣) and (2) the calligraphy style passed down among the Goryeong Shin clan (高靈申氏). This study verifies that various styles which emerged based on the influence of the revivalism of the late Yuan dynasty gained acceptance in the early Joseon period while the traditional Wang Xizhi style was still in use. The most notable revelation of this study is that the calligraphy style of Kangli Naonao (康里??), a Yuan dynasty calligrapher from a remote region to the west of China, appears to have become acceptable during this period. Indeed, various Yuan dynasty styles were flowing into Korea during the late Goryeo and the early Joseon period that stand in contrast to Zhao Mengfu's "pine-snow calligraphy style." Finally, the authenticity of the Eo Sukguan (魚叔權)'s record in A Storyteller's Miscellany (稗官雜記, Paegwanjapgi) is reviewed in this study. Eo claims that writing attributed to Park Gyeong in Renowned Calligraphy of Korea was actually Shin Jageon's. However, the analysis of the relationship between Shin and Park based on their backgrounds and their political positions suggests that Eo's claim is not valid.

Metabolizable energy requirement for maintenance estimated by regression analysis of body weight gain or metabolizable energy intake in growing pigs

  • Liu, Hu;Chen, Yifan;Li, Zhongchao;Li, Yakui;Lai, Changhua;Piao, Xiangshu;van Milgen, Jaap;Wang, Fenglai
    • Asian-Australasian Journal of Animal Sciences
    • /
    • v.32 no.9
    • /
    • pp.1397-1406
    • /
    • 2019
  • Objective: Feed energy required for pigs is first prioritized to meet maintenance costs. Additional energy intake in excess of the energy requirement for maintenance is retained as protein and fat in the body, leading to weight gain. The objective of this study was to estimate the metabolizable energy requirements for maintenance ($ME_m$) by regressing body weight (BW) gain against metabolizable energy intake (MEI) in growing pigs. Methods: Thirty-six growing pigs ($26.3{\pm}1.7kg$) were allotted to 1 of 6 treatments with 6 replicates per treatment in a randomized complete block design. Treatments were 6 feeding levels which were calculated as 50%, 60%, 70%, 80%, 90%, or 100% of the estimated ad libitum MEI ($2,400kJ/kg\;BW^{0.60}\;d$). All pigs were individually housed in metabolism crates for 30 d and weighed every 5 d. Moreover, each pig from each treatment was placed in the open-circuit respiration chambers to measure heat production (HP) and energy retained as protein ($RE_p$) and fat ($RE_f$) every 5 d. Serum biochemical parameters of pigs were analyzed at the end of the experiment. Results: The average daily gain (ADG) and HP as well as the $RE_p$ and $RE_f$ linearly increased with increasing feed intake (p<0.010). ${\beta}$-hydroxybutyrate concentration of serum tended to increase with increasing feed intake (p = 0.080). The regression equations of MEI on ADG were MEI, $kJ/kg\;BW^{0.60}\;d=1.88{\times}ADG$, g/d+782 ($R^2=0.86$) and $ME_m$ was estimated at $782kJ/kg\;BW^{0.60}\;d$. Protein retention of growing pigs would be positive while REf would be negative at this feeding level via regression equations of $RE_p$ and $RE_f$ on MEI. Conclusion: The $ME_m$ was estimated at $782kJ/kg\;BW^{0.60}\;d$ in current experiment. Furthermore, growing pigs will deposit protein and oxidize fat if provided feed at the estimated maintenance level.

Colorimetric Analysis of Preformed Zirconia Anterior Crowns for Esthetic Restoration (심미수복용 기성 지르코니아 크라운의 색조 평가)

  • Lee, Changkeun;Park, Kibong;Yang, Yeonmi;Lee, Daewoo;Kim, Jaegon
    • Journal of the korean academy of Pediatric Dentistry
    • /
    • v.46 no.3
    • /
    • pp.318-327
    • /
    • 2019
  • The purpose of this study was to identify which combination of zirconia crowns and cements is most similar in color to the maxillary primary incisors by varying the color of zirconia crowns, crown thickness, and shade of cements. Prefabricated zirconia crowns in 3 shades and crowns fabricated using 6 types of zirconia blocks were used in this study. These were filled with A2-shade or translucent-shade resin cement and the $L^*$, $a^*$, and $b^*$ values were calculated using a spectrophotometer. The color differences between the natural teeth and the zirconia crowns were assessed. The shade of the final restoration was more similar to that of the natural teeth using A2-shade than translucent-shade resin cement. Application of A2-shade cement to a 0.5-mm-thick crown fabricated from a smile series 2 zirconia block resulted in the color most similar to that of the natural teeth. A2-shade resin cement is recommended for zirconia crown restoration in anterior primary teeth compared to TR-shade resin cement for more esthetic restoration. Since restorations with Nu-smile zirconia crowns were not esthetically favorable in terms of shade, improvement of the shade characteristics of the product or development of a new kind of zirconia crown is required.

Secure File Transfer Method and Forensic Readiness by converting file format in Network Segmentation Environment (망분리 환경에서 파일형식 변환을 통한 안전한 파일 전송 및 포렌식 준비도 구축 연구)

  • Han, Jaehyeok;Yoon, Youngin;Hur, Gimin;Lee, Jaeyeon;Choi, Jeongin;Hong, SeokJun;Lee, Sangjin
    • Journal of the Korea Institute of Information Security & Cryptology
    • /
    • v.29 no.4
    • /
    • pp.859-866
    • /
    • 2019
  • Cybersecurity attack targeting a specific user is rising in number, even enterprises are trying to strengthen their cybersecurity. Network segmentation environment where public network and private network are separated could block information coming from the outside, however, it is unable to control outside information for business efficiency and productivity. Even if enterprises try to enhance security policies and introduce the network segmentation system and a solution incorporating CDR technology to remove unnecessary data contained in files, it is still exposed to security threats. Therefore, we suggest a system that uses file format conversion to transmit a secure file in the network separation environment. The secure file is converted into an image file from a document, as it reflects attack patterns of inserting malicious code into the document file. Additionally, this paper proposes a system in the environment which functions that a document file can keep information for incident response, considering forensic readiness.