• Journal of the Society of Disaster Information
• /
• v.14 no.4
• /
• pp.440-449
• /
• 2018

Purpose: This study aims to design and verify an onsite EEWS that extracts the P-wave from a single seismic station and deduce the PGV. Method: The P-wave properties of Pd, Pv, and Pa were calculated by using 12 seismic waveform data extracted from historic seismic records in Korea, and the PGVs were computed using empirical equation on the P properties - PGV relationship and compared with the observed values. Results: Comparison of the observed and estimated PGVs within the alarm level shows the error rate of 86.7% as minimum. By reducing the PTW to 2 seconds, the alarm time can be shortened by 1 second and the seismic blind zone near the epicenter can be shortened by 6 Km. Conclusion: Through this study, we confirmed the availability of the on-site EEWS in Korea. For practical use, it is necessary to develop regression formula and algorithm reflect local effect in Korea by increasing the number of seismic waveform data through continuous observation, and to eliminate the noise from the site.

• Journal of the Society of Disaster Information
• /
• v.16 no.4
• /
• pp.670-681
• /
• 2020

Purpose: This study aims to derive a PGV prediction equation and to enhance the application of the Onsite EEW technology which has developed through previous studies. Method: The prediction equation for the Onsite EEW derived from earthquake data M≥3.0 and MMI≥II over the past four years. Local seismic risk is estimated using M and PGV deduced from P wave properties. Result: The improved PGV prediction equation estimated the MMI with an average accuracy of 94.8% and the 𝜏_c : Pd method also showed valid performance for alerting local seismic risks. Conclusion: Onsite EEW technology is successfully applied to Korea, and becomes to reduce the blind zone to about 14km.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.26 no.1
• /
• pp.26-31
• /
• 2014

This study looks into changing building energy use by application of phase change material (PCM). PCM does not need extra energy for operation and is used for reducing building energy use and, CO2 output by displaying semi-permanent effects after installation. It also is able to avoid the maximum electric power time-zone by inducing a time lag phenomenon of cooling and heating loads with high thermal capacity using latent heat. To verify the efficiency of blinds and PCM, tests about the PCM operation mechanism using air conditioning machinery and nocturnal panel cooling were done. In the test results of the case using PCM installation, a $45^{\circ}$ blind angle with machinery air conditioning and nocturnal panel cooling at the same time shows a 22 percent energy saving effect against general space. The test results of each case were compared and analyzed based on the blind and window opening settings. Finally, the energy reduction of existing buildings using PCM application was reviewed based on the final measurement results.

• The Journal of Korea Robotics Society
• /
• v.13 no.1
• /
• pp.38-44
• /
• 2018

In this paper, we propose Intelligent Driver Assistance System (I-DAS) for driver safety. The proposed system recognizes safety and danger status by analyzing blind spots that the driver cannot see because of a large angle of head movement from the front. Most studies use image pre-processing such as face detection for collecting information about the driver's head movement. This not only increases the computational complexity of the system, but also decreases the accuracy of the recognition because the image processing system dose not use the entire image of the driver's upper body while seated on the driver's seat and when the head moves at a large angle from the front. The proposed system uses a convolutional neural network to replace the face detection system and uses the entire image of the driver's upper body. Therefore, high accuracy can be maintained even when the driver performs head movement at a large angle from the frontal gaze position without image pre-processing. Experimental result shows that the proposed system can accurately recognize the dangerous conditions in the blind zone during operation and performs with 95% accuracy of recognition for five drivers.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.29 no.1
• /
• pp.91-100
• /
• 2011

Fire stations should be located in optimal location to act quickly in case of emergency and minimize damages as a public facility that protects life and property of local residents. Siting fire stations without regard for the accessibility and occurrence factors of an accident may provide fire service unequally. Therefore service analysis is necessary to reduce the blind spot of disaster and safety and to offer equal fire-service at this time. Especially fire stations can service more efficiently than before by reducing a more likely vulnerable area. This study suggests methods of mapping index of value that represents vulnerability of the occurrence of an accident and extracting service zone map of fire stations, as an initial research for offering efficient fire service. Geographical distribution mismatch between service zone map and vulnerability map is figured out and vulnerable area for fire service is defined by using map overlay method.

• Journal of Information Technology Services
• /
• v.10 no.4
• /
• pp.243-258
• /
• 2011

With increasing interest in ubiquitous computing technology, an infrastructure for the short-distance wireless communication has been extended socially, bringing spotlight to the security system using the image or location. In case of existing security system, there have been issues such as the occurrences of blind spots, difficulty in recognizing multiple objects and storing of the unspecified objects. In order to solve this issue, zone-based location-estimation search system for the image have been suggested as an alternative based on the real-time location determination technology combined with image. This paper intends to suggest the search service for the image zone-based location-estimation. For this, it proposed the location determination algorism using IEEE 802.15.4/ZigBee's RSSI and for real-time image service, the RTP/RTCP protocol was applied. In order to combine the location and image, at the event of the entry of the specified target, the record of the time for image and the time of occurrence of the event on a global time standard, it has devised a time stamp, applying XML based meta data formation method based on the media's feature data based in connection with the location based data for the events of the object. Using the proposed meta data, the service mode which can search for the image from the point in time when the entry of the specified target was proposed.

• Journal of Korea Multimedia Society
• /
• v.20 no.3
• /
• pp.437-445
• /
• 2017

Necessity of security reinforcement has been increased these days. As a result, surveillance systems using CCTV and the patrol system by person have been applied to security zone. However, CCTV has a blind spot and CCTV itself cannot handle emergency situation. Patrol system by person is economically expensive. To overcome these disadvantages, this paper presents an image-based surveillance system using unmanned aircraft. As a default, unmanned aircraft traces lines installed on ground which represents path for patrolling. If the aircraft detects objects, then it keeps a constant distance between object without missing the object in the image. Simulation results show that the proposed system can be operated even with unmanned aircraft with low specification.

• Proceedings of the SAREK Conference
• /
• 2008.06a
• /
• pp.906-911
• /
• 2008

Because the perimeter of buildings is strongly influenced by solar and the outdoor air temperature, the area has different environmental properties compared to the interior of a building, as in summer heat gain, and in winter heat loss. In particular, if the external wall is glass, the characteristics of the glass material make it pervious to outside conditions, thereby making big changes to the thermal environment. By combining shading device and the efficient exhaust system, an energy saving can be achieved compared to no air barrier systems. The simplified air barrier system is developed with the idea that energy could be conserved by carefully and effectively blowing out the air caught between the glass surface and the roller blind. The way it is configured is therefore by making the roller blind's air-path, and by placing the air output ducts in the most optimum positions. This simplified air barrier system will give improvement in the thermal environment of the parameter area that is strongly affected by solar and the outdoor condition.

• Economic and Environmental Geology
• /
• v.23 no.4
• /
• pp.369-381
• /
• 1990

Most of significant ore deposits in South Korea such as the Sangdong W - Mo, the Yeonhwa Pb-Zn and the Geodo Cu-Fe skarn ore deposits occur at the southern limb of the Hambaeg syncline in the Taebaeg Basin. The mineralization took place in the interbedded limestone of the Myobong Formation and the Pungchon limestone of the Great Limestone Group of the Cambrian age, generally striking E-W and dipping 25-30 degrees north. There are no outcrops of the skarn-type orebody at the northern limb of the syncline. In order to find a clue of a possible hidden orebody localized at the limestones in the northern limb, a lithogeochemical exploration by using carbon isotope and some elements such as Si, Ca, Fe and Al at the Sangdong Mine area has been attempted as for a modelling study. For this study, 45 samples from the Pungchon limestone which do not show any megascopic indication of mineralization have been taken in both the mineralized zone and the unminerallized zone at the Sangdong Mine area. Analytical data show that there are big differences in the contents of CaO and $Al_2O_3$ between the Pungchon limestone of the mineralized zone and that of the unmineralized zone. Carbon isotope data exhibit that ${\delta}^{13}C$ values of the Pungchon limestone in the mineralized zone are highter than those in the unmineralized zone. The difference in the analytical values of CaO, $Al_2O_3$ and the carbon isotope between the mineralized and the unmineralized zones is as follows ; Unminerallized zone Mineralized zone CaO 51.3% 43.5% $Al_2O_3$ 0.6% 2.4% ${\delta}^{13}C$ -0.39 permil -0.56 permil $Fe_2O_3$ 0.9% 1.4% $SiO_2$ 3.0% 2.4% The decrease in the Si content of the Pungchon limestone in the mineralized zone is contrary to the result of the previous study (Moon, 1987). On the basis of identification of the increase in the Al content of the limestone in the mineralized zone, it could be deduced that the decrease in the Si content of the Pungchon limestone might be due to the result of increase in the alteration products mainly occurred along fracture-system such as joint cracks or minor faults and that the phenomena shown by the Si and Al content in the mineralized zone might be derived from the thermal effect of granite extended mineralizing activity to the overlied limestone on the surface. Higher mean values of Fe and Al as well as lower mean values of carbon content and the ${\delta}^{13}C$ than mean values of those in the Pungchon limestone at the northern limb of the Hambaeg Syncline may be applicable in exploration for blind orebodies.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.108-117
• /
• 2020

The purpose of this study is to analyze the blind spots of Korea's employment insurance system from a gender perspective. The data used for this study was derived from 12th (2009) and 20th (2017) years of the Korean Labor and Income Panel Studies. Logistic regression analysis was performed to analyze the causes of the blind spot. As a result, the gender gap decreased by 5% in 2017 compared to that in 2009. In the coverage of employment insurance by gender, women are more likely to join when controlling for other demographic factors. If the conditions in the labor market are the same, then women's insurance coverage is likely to be higher than that of men. The policy suggestions are as follows. The current employment insurance system has a greater impact on the labor market characteristics than the difference in the participation rate according to gender itself. The results of this study show that bridging the gender gap in the labor market is an important way of bridging the gender gap in employment insurance coverage. In the short term, the social insurance subsidy program may be effective, but policy efforts are fundamentally needed to improve the employment environment of women and low-wage workers.