• Geosystem Engineering
• /
• v.21 no.5
• /
• pp.251-261
• /
• 2018

With the urbanization in recent years, the power line interference noise in electromagnetic signal is increasing day by day, and has gradually become an unavoidable component of noises in magnetotelluric signal detection. Therefore, a kind of power line interference noise elimination method based on independent component analysis in wavelet domain for magnetotelluric signal is put forward in this paper. The method first uses wavelet decomposition to change single-channel signal into multi-channel signal, and then takes advantage of blind source separation principle of independent component analysis to eliminate power line interference noise. There is no need to choose the layer number of wavelet decomposition and the wavelet base of wavelet decomposition according to the observed signal. On the treatment effect, it is better than the previous power line interference removal method based on independent component analysis. Through the de-noising processing to actual magnetotelluric measuring data, it is shown that this method makes both the apparent resistivity curve near 50 Hz and the phase curve near 50 Hz become smoother and steadier than before processing, i.e., it effectively eliminates the power line interference noise.

• Journal of Navigation and Port Research
• /
• v.30 no.2
• /
• pp.167-172
• /
• 2006

In this paper, the issue of blind detection of Alamouti-type differential space-time (ST) ${\pi}/2$-shifted BPSK modulation in static Rayleigh fading channels is considered. We introduce a novel transformation to the received signal from each receiver antenna such that this binary ST modulation, which has a second-order transmit-diversity, is equivalent to QPSK modulation with second-order receive-diversity. The pre-detection combining of the result of transformation allows us to apply a low complexity detection technique specifically designed for receive-diversity, namely, scalar multiple-symbol differential detection (MSDD). With receiver complexity proportional to the observation window length, our receiver can achieve the performance 1.5dB better than that of conventional differential detection ST and 0.5dB worse than that qf a coherent maximum ratio combining receiver (with differential decoding) approximately.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.10B
• /
• pp.2004-2010
• /
• 1999

This paper presents the blind multiuser detector using the constant modulus algorithm(CMA) to solve the near-far problem in DS-CDMA systems. The convergence property of the detector is compared with the conventional MOE(minimum output energy) detector by means of SIR(signal-to-interference ratio). The MOE detector needs both the spreading code of the users and the timing information, while proposed methods needs only information about the spreading code of users Simulation results show that the CMA-based detector is superior to the conventional blind MOE multiuser detector. For this, the BER performance was tested using different values of SNR and near-far ratio. The SIR is also investigated for different number of users in AWGN and Rayleigh fading channels. We have observed that the proposed blind multiuser detector performs better than conventional MOE multiuser detector.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.10C
• /
• pp.1395-1401
• /
• 2004

In The objective of this paper is to apply blind minimum output energy multiuser detection method to multicarrier direct sequence code division multiple access system. The performance of MC/DS-CDMA is reduced due to multiple access. To increase the performance of system, we need to cancel multiple user components. Blind interference canceller is able to detect the desired's information with the only minimal information of the desired user. We evaluate the performance of the proposed receiver under Gaussian channel. Simulation results show that the proposed receiver has about 6［dB］ gain of signal to noise ratio without multiple user interference and has about 3［dB］ gain of SNR with multiple user interference. Also, the result of comparing the capacity of the active users shows that the proposed method has about 2 times capacity more than conventional method. As a conclusion, simulation results show that the proposed method has better performs better than conventional method.

• Journal of Software Assessment and Valuation
• /
• v.16 no.2
• /
• pp.143-151
• /
• 2020

The digital content's security and authentication are important in the field of digital content application. There are some methods to perform the authentication. The digital watermarking is one of authentication methods. Paper presents a digital watermark authentication method that works in the application of digital image. The proposed watermark has the triple status information and performs the embedding and the detection without original Content. When authenticating the owner information of digital content, an autocorrelation function is used. In addition, a spread spectrum method is used to be adaptive to the signal of the original content in the frequency domain(DWT Domain). Therefore, the possibility of errors occurring in the detection of hidden information was reduced. it also has a advantage what Watermarking in DWT has faster embedding and detection time than other transformation domains(DFT, DCT, etc.). if it has a an image of size N=mXm, the computational amount can be reduced from O(N·logN) to O(N). The particular advantage is that it can hide more information(bits) per bit.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.19 no.1
• /
• pp.30-36
• /
• 2015

Purpose Whole body bone scan, which makes up a largest percentage of nuclear medicine tests, has high sensitivity and resolution about bone lesion like osteomyelitis, fracture and the early detection of primary cancer. However, any standard for valuation has not yet been created except minimum factor. Therefore, in this study, we will analysis the method which show a quantitative evaluation index in whole body bone scan. Materials and Methods This study is conducted among 30 call patients, who visited the hospital from April to September 2014 with no special point of view about bone lesion, using GE INFINIA equipment. Enumerated data is measured mainly with patient's whole body count and lumbar vertabrae, and the things which include CNR (Contrast to Noise ratio), SNR (Signal to Noise ratio) are calculated according to the mean value signal and standard deviation of each lumbar vertabrae. In addition, the numerical value with the abdominal thickness is compared to each value by the change of scan speed and tissue equivalent material throughout the phantom examination, and compared with 1hours deleyed value. Completely, on the scale of ten, 2 reading doctors and 5 skilled radiologists with 5-years experience analysis the correlation between visual analysis with blind test and quantitative calculation. Results The whole body count and interest region count of patients have no significant correlation with visual analysis value throughout the blind test(P<0.05). There is definite correlation among CNR and SNR. In phantom examination, Value of the change was caused by the thickness of the abdomen and the scan speed. And The poor value of the image in the subject as a delay test patient could be confirmed that the increase tendency. Conclusion Now, a standard for valuation has not been created in whole body bone scan except minimum factor. In this study, we can verify the significant correlation with blind test using CNR and SNR and also assure that the scan speed is a important factor to influence the imagine quality from the value. It is possible to be some limit depending on the physiology function and fluid intake of patient even if we progress the evaluation in same condition include same injection amount, same scan speed and so on. However, that we prove the significant evaluation index by presenting quantitative calculation objectively could be considered academic value.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.6
• /
• pp.303-307
• /
• 2011

This paper describes an audio watermarking using Quantization Index Modulation (QIM) on significant peaks in frequency domain. The audio signal is broken up into L samples length frames with non-overlapping and rectangular window. The zero-crossing rate of each frame is calculated for decision whether it is proper to be watermarked or not. If the frame is legitimate, frequency magnitude response is computed by discrete Fourier transform. For the QIM, we set the quantization step size based on maximum value of frequency magnitude response and select n significant peaks with w samples around them in frequency domain, totally $n{\times}(w+1)$ samples. Finally, watermark embedding is performed. Decoder extract watermarks based on Euclidean distance, that is a blind detection. The proposed method is robust against many attacks of watermark benchmark.

• Journal of Electrical Engineering and Technology
• /
• v.10 no.5
• /
• pp.2179-2188
• /
• 2015

Recently, many researches have been done to solve the challenging problem of Blind Source Separation (BSS) problems in the underdetermined cases, and the “Two-step” method is widely used, which estimates the mixing matrix first and then extracts the sources. To estimate the mixing matrix, conventional algorithms such as Single-Source-Points (SSPs) detection only exploits the sparsity of original signals. This paper proposes a new underdetermined mixing matrix estimation method for time-delayed mixtures based on the receiver prior exploitation. The prior information is extracted from the specific structure of the complex-valued mixing matrix, which is used to derive a special criterion to determine the SSPs. Moreover, after selecting the SSPs, Agglomerative Hierarchical Clustering (AHC) is used to automaticly cluster, suppress, and estimate all the elements of mixing matrix. Finally, a convex-model based subspace method is applied for signal separation. Simulation results show that the proposed algorithm can estimate the mixing matrix and extract the original source signals with higher accuracy especially in low SNR environments, and does not need the number of sources before hand, which is more reliable in the real non-cooperative environment.

• Journal of Biomedical Engineering Research
• /
• v.44 no.2
• /
• pp.118-124
• /
• 2023

Many recent studies have reported that the quality of input learning data was vital to the detection of regions of interest. However, due to a lack of research on the quality of learning data on lesion detetcting using gastroscopy, we aimed to quantify the impact of quality difference in endoscopic images to lesion detection models using Image Quality Assessment (IQA) algorithms. Through IQA methods such as BRISQUE (Blind/Referenceless Image Spatial Quality Evaluation), Laplacian Score, and PSNR (Peak Signal-To-Noise) algorithm on 430 sheets of high quality data (HQD) and 430 sheets of low quality data (PQD), we showed that there were significant differences between high and low quality images in lesion detecting through BRISQUE and Laplacian scores (p<0.05). The PSNR value showed 10.62±1.76 dB on average, illustrating the lower lesion detection performance of PQD than HQD. In addition, F1-Score of HQD showed higher detection performance at 77.42±3.36% while F1-Score of PQD showed 66.82±9.07%. Through this study, we hope to contribute to future gastroscopy lesion detection assistance systems that involve IQA algorithms by emphasizing the importance of using high quality data over lower quality data.

• International Journal of Advanced Culture Technology
• /
• v.9 no.4
• /
• pp.320-328
• /
• 2021

As the number of visually impaired people steadily increases, interest in independent walking is also increasing. However, there are various inconveniences in the independent walking of the visually impaired at present, reducing the quality of life of the visually impaired. The white cane, which is an existing walking aid for the visually impaired, has difficulty in recognizing upper obstacles and obstacles outside the effective distance. In addition, it is inconvenient to cross the street because the sound signal to help the visually impaired cross the crosswalk is lacking or damaged. These factors make it difficult for the visually impaired to walk independently. Therefore, we propose the design of an embedded system that provides traffic light recognition through object recognition technology, voice guidance using TTS, and upper obstacle recognition through ultrasonic sensors so that blind people can realize safe and high-quality independent walking.