• Journal of the Korean Solar Energy Society
• /
• v.24 no.4
• /
• pp.35-43
• /
• 2004

Illuminance and luminous levels in a small office space due to daylight were calculated to analyze the impact of daylight on contrast and lighting energy savings. Computer simulations were performed for four blind conditions under a clear sky condition. The blind conditions significantly impacted the illuminance an4 luminance level. Visual performance scores were calculated according to the transfer function that uses absolute contrast between target and background surface. The blind condition that had 45 tilted angle toward ground provided good contrast and performance scores. Using a control algorithm of an automated daylight dimming control system lighting energy sayings were predicted. For all blind conditions minimum lighting energy was consumed.

• Journal of the Korean housing association
• /
• v.23 no.1
• /
• pp.27-41
• /
• 2012

The objective of this study is to develop the blind control strategy and method which reduce negative effect of incoming daylight on visual comfort of occupants, minimize psychological anxieties caused by frequent motions of a blind, and maximize positive effect of incoming daylight and solar irradiation by opening/closing of a blind. As previous researches on blind controls have limited outdoor environmental conditions to those in specific regions, orientations and dates, these resulted in problems at various conditions for general-purpose application. Major problem is that the time interval and amount of blind movement do not meet the control objective at the end of control zone and discontinuous curve. To overcome these limitations revealed in the previous researches, following tasks were performed in this study. 1) To establish the control objective to accomplish the goal of this study. 2) To develop the control methods and algorithms which prevent glare on the work-plane at any time and which control the time interval and amount of blind movement to follow the control objective at various profile angle curves. 3) To validate the general-purpose applicability and performance of the developed control methods and algorithms by simulation and its data analysis at various conditions. It was found that the proposed methods and algorithms can prevent the direct glare on the work-plane at all the time and also increase the incoming daylight and solar irradiation.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.8
• /
• pp.1037-1045
• /
• 1999

We propose two new classes of robust blind equalization algorithms against abrupt changes of channel conditions, which we call a triple-mode algorithm(TMA) and an automatic switch-over algorithm(ASA). The conventional DMGSA exhibits slow convergence rates due to the incorrect equalizer tap-updating process under the severe channel conditions. In order to speed up the convergence process, the TMA operates in triple-mode that is based on the dual-mode of the DMGSA incorporated with the tap-updating control modes of the SGA as well as the MSGA. Without resorting to the decision region for selecting the operation mode in the TMA, the ASA automatically switches the blind mode to the smoother conventional decision-directed mode. The ASA uses the error functional that is the weighted sum of the Generalized Sato error and the decision-directed error, where the weights correspond to the channel conditions. Test results on 16-QAM and 8-VSB datas confirm that the TMA and the ASA perform well under the sudden changes of channel conditions.

• Land and Housing Review
• /
• v.12 no.2
• /
• pp.79-89
• /
• 2021

This simulation based study analyzed the horizontal daylight distribution on the floor and ceiling of a small office space based on window orientations and interior window blind positions. South and north facing windows were each tested without window blinds and with window blinds at 45° and 180° (horizontal). The study showed that the illuminance value was highest 1m from the window. On the floor and ceiling, the difference in illuminance value was the greatest and least in December and June, respectively. The indoor illuminance value was highest when there was no window blind and under south-facing conditions. The greatest illuminance difference occurred between window blinds positioned at 45° and 180°. Under north-facing conditions, windows without blinds or with blinds at 45° had the least impact on indoor illuminance with illuminance being more evenly distributed.

• KIEAE Journal
• /
• v.15 no.1
• /
• pp.83-88
• /
• 2015

This study aims to develope the light-weight PV blinds with windows and to investigate the shading analysis by the control conditions. For the study, the polycarbonate characteristics and coating methods are analyzed and the PV blind design for a small office is suggested. Also, the mock-up model of a suggesting system was made. The field tests were controled based on a solar altitude under clear sky conditions. As results, it is necessary to use a polycarbonate instead of a tempered glass for a light-weight PV. The shading effects of blind systems are high in slat angle $30^{\circ}$ and low in $0^{\circ}$. Also, the shading ratio is more affected by solar latitude than solar altitude. The shading change rate is relevantly constant on the solar altitude.

• Smart Structures and Systems
• /
• v.17 no.3
• /
• pp.391-411
• /
• 2016

This study investigates the mode identifiability of a multi-span cable-stayed bridge in terms of a benchmark study using stabilization diagrams of a system model identified using stochastic subspace identification (SSI). Cumulative contribution ratios (CCRs) estimated from singular values of system models under different wind conditions were also considered. Observations revealed that wind speed might influence the mode identifiability of a specific mode of a cable-stayed bridge. Moreover the cumulative contribution ratio showed that the time histories monitored during strong winds, such as those of a typhoon, can be modeled with less system order than under weak winds. The blind data Acc 1 and Acc 2 were categorized as data obtained under a typhoon. Blind data Acc 3 and Acc 4 were categorized as data obtained under wind conditions of critical wind speeds around 7.5 m/s. Finally, blind data Acc 5 and Acc 6 were categorized as data measured under weak wind conditions.

• Journal of the Korean Solar Energy Society
• /
• v.34 no.6
• /
• pp.75-83
• /
• 2014

Heat loss through windows and doors occupies 20 to 45% of the total heat loss in building. It accounts for a large proportion of the total heat loss in building. In order to suppress the amount of heat flow through the windows and doors were considered actions such as reinforcement of insulation performance of window, adoption of low-e glass, and installation of solar heat shading device. The Purpose of this study is to compare solar heat shading performances of 3 types of internal blinds in the summer. In order to verify the solar heat shading performances of the blinds, a roll blind, blind A(Venetian blind) and blind B(Daylight guiding venetian blind)were installed in the four rooms with the same environmental conditions. As a result of the experiment, the blind B, blind A, roll blind showed an excellent performance in that order. Its because the blind B is made of aluminum materials coated with special paints on surface. It doesn't converted to long wave by short wave light. and it is reflected to short wave to outside.

• Journal of Acupuncture Research
• /
• v.20 no.1
• /
• pp.22-34
• /
• 2003

Objective : To ascertain whether the concept of the treatment side is associated with changes in the blind spot mapping that represents the brain function. Methods : Among the outpatients who visited to Department of Acupuncture & Moxibustion, National Medical Center from March 2002 to October 2002, we selected 40 clinical trial volunteers that showed right side physiological blind spot more enlarged than left, and underwent the examinations of Department of Opthalmology, National Medical Center for ruling out the pathological conditions. Physiological blind spot maps were used as an integer of brain activity before and after electroacupuncture application on the unilateral ST36 meridian point by dividing 40 subjects into two comparative groups for double-blind controlled study. Results: The significant changes in the blind spots were observed. Electroacupuncture application on the ipsilateral or contralateral ST36 of an enlargement cortical map were associated with the concept of determining the treatment side. In the case of electroacupuncture application on the ipsilateral side of an enlarged blind spot, there were decrease of $4.11{\pm}8.56cm$(17.3%) in blind spot perimetry length(p < 0.05). In the case of contralateral side, there were increase of $3.19{\pm}5.40cm$(13.7%) in blind spot perimetry length(p<0.05). The Differences were statistically significant(p<0.05). Conclusions: We found that eletroacupuncture application was associated with an increase or decrease in the brain function in the view of blind spot changes depending on the treatment side. These results suggest that the traditional acupuncture therapeutic strategy with determining the treatment side has clinical significance in the view of the brain function.

• Land and Housing Review
• /
• v.10 no.3
• /
• pp.33-41
• /
• 2019

This study examines the distributions of daylight illuminance in a small office space under clear and cloudy sky conditions. Three shading conditions using Venetian blinds were applied for the analysis of daylight illuminance. Computer simulations using the Lightscacpe were conducted for the daylight conditions applied to the office space. Results indicate that the illuminance differences between clear and cloudy sky for south-facing conditions were greater than those for north-facing conditions. The differences in December and June were the greatest and smallest, respectively. For the north-facing conditions, the daylight illuminance at 10:00, 12:00 and 14:00 in June and September under the cloudy sky was higher than those under the clear sky conditions. For all daylight conditions, the biggest amount of illuminance reduction occurred when the shading device conditions were changed from the no blind to the 45 degree blinds. As the distance from window increased, the shading effect that occurred when the shading device conditions were changed from the horizontal blind to the 45 degree blinds increased.

• Journal of Broadcast Engineering
• /
• v.24 no.7
• /
• pp.1237-1245
• /
• 2019

Most of the blind are low vision blinds due to injury or disease. As their vision decreases, they are experiencing inconvenience in their normal life and forgetting their memories with their family. The purpose of this study is to use Lithophane printing technology to help their normal life and to remember their family. Also, the manufactured 3D plates are to study the conditions that can be optimal understood through the tactile sense of low vision blind. When the low vision blind person understood the 3D plates, they chose three parameters that affect their tactile sense. And by comparing their tactile sense, the optimal condition results were found. This paper was concluded with (1) the round form that perceived as 3D objects, (2) the thin thickness similar to Braille, and (3) the high resolution that can be expressed in detail.