• Polymer(Korea)
• /
• v.37 no.3
• /
• pp.255-261
• /
• 2013

This paper introduced a new preparation method of a composite rubber by mixing BR (butadiene rubber) and CIIR (chloro-isobutyl rubber) for the purpose of improving frictional property of BR. Since BR has high abrasion and low frictional properties, its frictional property needs to be enhanced in order to be used as an outsole of a sport shoe. Such enhancement was difficult to achieve by simple blending of CIIR. In here, CIIR was added into BR matrix after CIIR was pre-crosslinked for a time period, and both high frictional and high abrasion resistance properties were achieved. Our experiments showed that the composite rubber blend of 60% of BR and 40% of pre-crosslinked CIIR had desired BR's frictional and abrasion resistance properties for sport shoes.

• Fashion & Textile Research Journal
• /
• v.17 no.6
• /
• pp.1030-1038
• /
• 2015

The purpose of this study is to investigate the dyeability of crabyon fiber contained cotton towels after dyeing with gallut. In this study, the colorants of gallnut were extracted with boiling water at 60℃ and 60min. Crabyon, composite fiber of Chitin/Chitosan and cellulose, is manufactured by uniformly blending Chitin/Chitosan and cellulose viscose and extruding the blended viscose into spin-bath. Cotton towels with crabyon fiber dyed with extracted solution from gallnut according to concentration, temperature and time. Crabyon fiber contained cotton towels dyed using gallnut were pre of post-mordanted using Al, Cu, and Fe. The dyeability(K/S) and color characteristics(L^*, a^*, b^*, C, and h(color angle)) of dyed crabyon fiber contained cotton towels were measured by computer color matching machine and photographs. The crabyon fiber composition of cotton towels was conformed by amide peak(-CONH-) of chitin or chitosan of FT-IR spectroscopy. The results obtained were as follows; The amide peak of crabyon fiber contained cotton towels appeared at about 1652 cm⁻¹. The dyeability of crabyon fiber contained cotton towel was increased gradually with increasing concentration of gallnut dyeing solution and saturated at about 150%(o.w.f). The optimum dyeing temperature and dyeing time were 90~100℃ and 80minutes expectively. The crabyon fiber contained cotton towels were dyed reddish yellow by non, Al, and Cu mordanting, reddish blue by Fe mordanting, respectively. The fastness to washing according to concentration of gallnut in and mordanting method indicated good grade result as more than 3~4 degree in all conditions.

• Fire Science and Engineering
• /
• v.30 no.6
• /
• pp.92-98
• /
• 2016

This study evaluated thermal image real-time estimation and fire alarm using by a CCD camera, which has been a seamless feature-point analysis method, according to the angle and position and image fusion by a vector coordinate point set-up of equal shape. The system has higher accuracy, fixing data value of temperature sensing and fire image of 0~255, and sensor output-value of 0~5,000. The operation time of a flame specimen within 500 m, 1000 m, and 1500 m from the test report specimen took 7 s, 26 s, and 62 s, respectively, and image creation was proven. A diagnosis of fire accident was designated to 3 steps: Caution/Alarm/Fire. Therefore, a series of process and the transmission of SNS were identified. A light bulb and fluorescent bulb were also tested for a false alarm test, but no false alarm occurred. The possibility that an unwanted alarm will be reduced was verified through a forecast of the fire progress or real-time estimation of a thermal image by the change in the image of a time-based flame and an analysis of the diffusion velocity.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.40 no.10
• /
• pp.865-871
• /
• 2016

In recent years, traditional scaffold fabrication techniques such as gas foaming, salt leaching, sponge replica, and freeze casting in tissue engineering have significantly limited sufficient mechanical property and cell interaction effect due to only random pores. Fused deposition modeling is the most apposite technology for fabricating the 3D scaffolds using the polymeric materials in tissue engineering application. In this study, 3D slurry mould was fabricated with a blended biphasic calcium phosphate (BCP)/Silica/Alginic acid sodium salt slurry in PCL mould and heated for two hours at $100^{\circ}C$ to harden the blended slurry. 3D dual-pore BCP/Silica scaffold, composed of macro pores interconnected with micro pores, was successfully fabricated by sintering at furnace of $1100^{\circ}C$. Surface morphology and 3D shape of dual-pore BCP/Silica scaffold from scanning electron microscopy were observed. Also, the mechanical properties of 3D BCP/Silica scaffold, according to blending ratio of alginic acid sodium salt, were evaluated through compression test.

• The KIPS Transactions:PartB
• /
• v.16B no.3
• /
• pp.215-224
• /
• 2009

A film colored overlay has been used as an assistive device for dyslexics, Recently, several virtual colored overlays which can be used in computer were developed. But existing virtual overlays have some drawbacks which have limited colors and limited control capability over overlapped window by the overlays. Limited colors may prevent optimum color selection and limited control capability can obstruct to transfer keyboard and mouse operation to the overlapped window. In this paper, we implemented an overlay function which controls an overlapped window under the overlay window by using keyboard hooking and tray icon. We propose a method to determine the source color of a virtual overlays by estimating alpha value of alpha blending algorithm through measurement of the chromaticity and transmissivity of film overlays and implemented all colors which we can produce colors by using Intuitive Overlays. Test results of the developed virtual overlay show that all mentioned drawbacks of existing virtual overlays were eliminated. Therefore we can employ a result of WRRT to use the developed overlays.

• Journal of Fashion Business
• /
• v.5 no.4
• /
• pp.14-26
• /
• 2001

A lot of designers are adopting a mixed imitation as techniques of cretion because cultural boundary and structure of meaning in the era of post-modernism are collapsed and dissolved. I raise up a question mark to how can genuine and creative designers can be identified at this epoch when we are today familiar with the trend of informationalization, opening and globalization. Characterisitics of multi-culturalism and compromising blending are meshed with appearance of a theory of disorganization and consumer-driven economic activity of multi-national enterprises in the age of post capitalism. Accordingly it can be said that designers are leaning upon public and consumeroriented pattern rather than pursuing a creative cultural production. With mass media in rapid advancement and public culture in father dissemination, mass production and mass re-production became a natural cultural phenomenon strengthen ing its root. Creative designers somewhat slow and limitative in pace of adaption to rapid changing society amid such social backgrounds and flooded information are coming to dead-end of wall. A mixed imitation as techniques of creation is a result of borrowing, duplicating or re-combining of existing things because the mixed imitation is equivalent to borrowing, copying, compilation and recombination of well-known artworks, motive, diverse people's cultural features, image, techniques and the likes. It is too delicate thing for one to definitely distinguish such cultural phenomenon from either one as creative work or a plagiarized work. Looking into the facts as they are, we should recognize the designers limitation in their creative works by means of the mixed imitation. thus we can have a view upon them from a criticizing standpoint against the designers creation and imitation. On the other hand, when we look at things how the mixed imitation appears in the fashion as a piece of culture, we can understand something of the contemporary designers. I try to find a significance in seeking out a method of approaching to creative fashion designers direction in future times.

• Design & Manufacturing
• /
• v.14 no.3
• /
• pp.50-56
• /
• 2020

Ceramic tile is widely used as a floor or interior decoration of buildings. The main processes are raw material blending, molding, drying, firing, etc., and since dimensional and quality stability are very important, they are generally molded by a dry press method. In ceramic tile molds, there is a liner that can be easily replaced in case of wear. The liner is constantly abrasion due to a continuous pressing process during tile forming, and it is required to be replaced every certain period. Even in the liner, use a wear-resistant fitting material only in areas where wear is concentrated. However, there was a risk that the fitting material was applied to large-sized tile molding due to problems such as damage to the molding machine and decrease in productivity when detached during the actual tile molding process due to weak fitting strength with the liner. Therefore, in this study, thermal-structural analysis for fitting tolerance analysis and structural analysis for fitting force analysis were performed for the shrink fit process of the fitting material.

• Journal of the Korean Applied Science and Technology
• /
• v.33 no.4
• /
• pp.615-626
• /
• 2016

In the paper, mild solvent soluble alkyl group modified epoxy resins were prepared via a three-step method; (1) the condensation reaction of dodecyl phenol (DP) and formaldehyde, (2) the crosslinking reaction of dodecyl phnol novolac compound (DPC) and bisphenol A diglycidyl ether, (3) the dodecyl phenol novolac epoxy resins containing fatty acid (DPFA) was prepared by introducing fatty acid to DPC. Equivalent ratios of DP and formaldehyde were 1.25~1.333/1.0. Equivalent ratio of DPC and bisphenol A diglycidyl ether (YD-128) was 1.0/2.0. Reactivity, viscosity, molecular weight, solvent solubility, and physical properties of DPFA were investigated. The result show that as the number of aromatic ring of DPFA increased, viscosity increased and solvent solubility improved. When we test the properties of coatings by blending the synthesized DPFA with a white pigment, DPFAC-5 using triphenylphosphine (TPP) as a ring-open catalyst showed optical performance for drying time, adhesion, hardness, impact resistance, acid resistance and storage stability.

• Journal of the Korean Academy of Child and Adolescent Psychiatry
• /
• v.27 no.2
• /
• pp.109-118
• /
• 2016

Objectives: The aim of this study was to develop the computerized Comprehensive Learning Test-Reading (CLT-R) to evaluate the cognitive processes and achievements related to their basic reading ability and identify dyslexia in children and adolescents in South Korea. We also obtained the normative data and evaluated the reliability and validity of the test. Methods: We developed the CLT-R, including the word attack/nonword decoding, paragraph reading, sound blending, nonword repetition, rapid automatized naming, letter-sound matching, visual attention, orthography awareness, and digit span tests, for the purpose of diagnosing dyslexia. We investigated the reliability and validity of the tests and gathered the normative data from 399 subjects (male 48.9%), aged 5-14 years, from the last grade in kindergarten to middle school, dwelling in Seoul and Gyeonggi Province, South Korea. Results: No statistical differences were observed between the means of the tests and retests of the CAT. The mean of the correlation coefficient of the test-retest scores was 0.85. According to the construct validity test calculated by principal constant analysis using the oblique rotation method, 4 factors explained 70.0% of the cumulative variances. In addition, the normative data were obtained for all of the CLT-R subtests. Conclusion: The computerized CLT-R can be used as a reliable and valid tool to evaluate the reading achievement and reading related cognitive process in Korean children and adolescents in schools, clinics, and research institutes.

• The Journal of Korean Association of Computer Education
• /
• v.12 no.5
• /
• pp.49-62
• /
• 2009

The Extra-Curriculum in The Air and Correspondence High School(ACHS), which play a role as an organization of lifelong learning, has not been operating properly for lack of appropriate circumstances and also educational research. So this research applied the Extra-Curriculum on-line contents to ACHS as an example to search for the effective operation solution in ACHS Extra-Curriculum, and derived the implications which are necessary to class operation. According to the implications which are obtained by the analysis of the application result, selected the five main areas in Blended-Learning which are necessary to the operation of ACHS Extra-Curriculum, and developed the direct instruction model by blending the teaching-learning method and strategy which is suitable for the ACHS Extra-Curriculum. Finally, based on these research results, this research developed the Blended-Learning Teaching Model for ACHS Extra-Curriculum by reflecting the peculiarity of ACHS student and characteristics of Extra-Curriculum contents.