• 한국염색가공학회지
• /
• 제18권6호
• /
• pp.31-36
• /
• 2006

Study has been made for producing anionic surfactant using waste fleshing scraps from the leather making process through refining, esterification, sulfonation and blending processes. As a most optimum lard oil refining method, refining was carried out for 4 hours under temperature of $120^{\circ}C$ and approximately 200 mbar vacuum, which gave a recovery of more than 80% lard oil. Refined lard oil obtained thus was undergone methlyl-esterification, then sulfonated to make a degreasing agent. By methyl-esterification using lard oil, more than 85% of fatty acid and $12{\sim}13%$ of glycerine were extracted from the oil. Sulfonation of the extracted fatty acid ester lard oil has shown most optimum at $15{\sim}20%$ chlorosulfonic acid content, and the content of bonding sulfate at this time was higher than 3.5%. Finally the followed anionic surfactant having degreasing force of 80% and higher could be made by blending process.

• 한국응용과학기술학회지
• /
• 제16권1호
• /
• pp.25-31
• /
• 1999

Algin is known as biodegradable natural polymer from marine plants. PVA/Algin blend films were prepared by solution blending method for the purpose of useful biodegradable polymer. Characteristics properties of PVA/Algin blend films such as DSC, Elongation, Tensile strength and Morphological change by SEM were determined. Tensile strength and Elongation were rapidly reduced as increasing the blend ratio of Algin. PVA/Algin blend films were found that phase separation was occured as more than 25wt% increasing the blend ratio of Algin. Blend films were observed to be less partially compatibility than 10wt% increasing the blend ratio of Algin by DSC, mechanical properties and SEM. Also, PVA/Algin blend films at the laboratory soil test(Pot Test) were completely degraded in months with four kinds of soils by microorganisms.

• 한국실내디자인학회논문집
• /
• 제15권4호
• /
• pp.29-36
• /
• 2006

Fashion and interior architecture are two areas of design that may share common issues, trends and philosophies, making fashion design human's second skin and interior architecture the third. The concept of 'skin' has become one of the most interesting phenomena in design during the past decade and not surprisingly similar issues can be seen also in fashion and architectural design. The current trend in fashion design is that the skin (clothing) has become detached from the human body and extended into the environment, resulting fashion as art objects. Skin in architecture and interior design has also become detached from the structure so designers have more freedom to experiment by using advanced technologies. The present study attempts to analyze common features of 'skin phenomenon' in fashion and interior architecture that are; detachment, emphasis on space, extension, territorial blending, and digital applications. The researcher has used constant comparative method to categorize the five features among many examples. The limitation of this study is that it is focused on the formative phenomena of projects excluding the philosophies and personal background of each designer. However, it is hoped that the study may assist designers and other researchers to understand relationships between fashion and interior design, hold broader spectrum in art and design.

• 한국의류학회지
• /
• 제29권2호
• /
• pp.347-355
• /
• 2005

Biodegradability of cotton/polyester blend fabric was investigated employing activated sluge test, soil burial test and enzyme hydrolysis. Surface changes of the degraded sample were observed through a microscopy. Changes in X-ray diffraction patterns and crystallinity were examined using X-ray diffractometer. Experimental results revealed that biodegradability of cotton/polyester blend fabric was proportional to the blending ratio of cotton, not showing any synergy effect. Polyester 100% hardly degraded in this study. Through the comparison of the experimental method it was shown that the biodegradabilities determined from activated sludge test and enzymatic hydrolysis except soil burial test were linearly related to the blending ratio of cotton in the blent fabrics. It is probably because the biodegradability determined from the retention of tensile strength of fabrics buried in soil was affected by the stress distribution of polyesters throughout the fabric. From the microscopic observations it was revealed that fungi were grown on the fabric surface and the colors turned yellow, brown and black. X-ray diffraction patterns showed that the heights of crystalline peak coming from cotton part in blend fabrics decreased whereas those coming from polyester part increased comperatively as time passed by. Crystallinities of cotton 100% fabric increased slightly at the begining and then decreased continuously.

• 한국정보통신학회논문지
• /
• 제14권8호
• /
• pp.1827-1835
• /
• 2010

본 논문은 사용자 사진에서 ASM(Active Shape Model)을 이용하여 얼굴의 각 특징 점을 추출하고, 추출 된 특징점을 이용하여 화장할 부분의 영역을 생성 한다. 기존의 가상 메이크업 프로그램에서는 사용자가 수동적으로 몇 개의 특징 점을 정확히 선택해야 하는데서 불편함을 초래했다. 본 논문에서 제안하는 가상 메이크업 프로그램에서는 ASM을 이용하여 사용자의 입력을 필요로 하지 않는다. 자연스러운 화장 효과를 표현하기 위해서 기본적인 알파 블렌딩을 각각 화장품의 특징에 맞게 변형하여 사용자 피부색과 화장품의 색을 혼합한다. 얼굴 윤곽, 눈, 눈썹, 입술, 볼의 영역을 생성하고, Foundation, Blush, Lip Stick, Lip Liner, Eye Pencil, Eye Liner, Eye Shadow 종류의 화장을 할 수 있게 구현하였다.

• 한국연초학회지
• /
• 제27권1호
• /
• pp.141-152
• /
• 2005

This study focused on the relationships among leaf and smoke components and sensory properties following tobacco leaf blending. A completely randomized experimental design was used to evaluate components of leaf and smoke and sensory properties for sample cigarettes with four mixtures of flue cured and burley tobacco (40:60, 60:40, 80:20 and 100:0). Eleven leaf components, six smoke components, and eight sensory properties of smoking taste were analyzed. A sensory evaluation method known as quantitative descriptive analysis was used to evaluate perceptual strength on a fifteen score scale. Raw data from ten trained panelists were obtained and statistically analyzed. Based on the MANOVA, clustering analysis, correlation matrix and partial least square (PLS) method were applied to find out which smoke component most affected sensory properties. The PLS method was used to remove the influence between explanatory variables in the leaf, smoke components derived from the results. High correlations (p<0.0l) were found among ten specific leaf and smoke components and sensory attributes. Total nitrogen, ammonia, total volatile base, and nitrate in the leaf were significantly correlated (p<0.05) with impact, bitterness, tobacco taste, irritation, smoke volume, and smoke pungency. From the results of PLS analysis, influence variables are used to explain about the correlation. In terms of bitterness, with only two explanatory variables, Leaf $NO_3$ and Leaf crude fiber were enough for guessing their correlation. In the distance weighted least square fitting analysis, carbon monoxide highly influenced bitterness, hay like taste, and smoke volume.

• 한국건축시공학회지
• /
• 제6권3호
• /
• pp.75-82
• /
• 2006

This study investigates the influence of various blending factors on cement paste fluidity and find out the most effective evaluation method of cement paste flow, comparing flow test apparatuses such as ring flow(R-F), flow cone(F-C) and mini slump(M-S). A viscometer also measures the rheology coefficients to secure faithful numerical data. Firstly, series I examines cement paste, affected by several cement products and mineral admixture types in the range of W/B 40%, ordinary fluidity, and W/B 30%, high fluidity. In this series, the three types of cement product depended on companies, are randomly used and the mineral admixture, such as fly ash, blast furnace slag and silica fume, are incorporated in the cement paste, in response to the ratio of 10, 20, to 30%, respectively. In addition, series II studies various chemical admixture types, affecting the cement paste. This series is carried out with manufacturing companies and component types in the range of W/C 30%, high fluidity. For the manufacturing companies, randomly four products are used and for the component types, polycaboxylate, melamine, naphthalene and lignosulfonate type are chosen. Test results showed that in the fluidity test of cement paste considering various types of blending factors, R-F exhibited similar tendency with F-C and M-S. In the analysis of consistency curves measured by viscometer, the fluidity evaluation method using flow test apparatuses was significantly effective, except for the some of the low fluidity specimens. In conclusion of this study, R-F was the most convenient, faithful and effective fluidity evaluation method of cement paste.

• 전자공학회논문지CI
• /
• 제43권2호
• /
• pp.63-71
• /
• 2006

칼라 영상의 잡음 제거 및 복원은 컴퓨터 비젼 및 영상 처리 분야에서 점점 더 많은 연구가 되어지고 있는 분야이다. 칼라얼굴 영상에서의 잡음 제거 및 복원은 색상들 간의 미묘한 상호작용뿐만 아니라 얼굴의 구조학적 특징 때문에 일반적인 영상의 처리보다 더욱 어렵다. 본 논문은 벡터기반의 영상 필터들을 이용하여 제거하기 어려운 칼라 얼굴 영상의 복합 잡음을 제거 하기 위해 PCA 재구성 기반의 잡음 제거 방법을 제안한다. 제안된 방법은 PCA를 이용한 정준 고유얼굴 공간의 학습단계, 동적 외양 모델을 이용한 자동적인 얼굴 특징 추출 단계, Bilateral 필터를 이용한 복원된 칼라 영상의 재조명(Relighting) 단계, 학습 데이터들의 분산 값들을 이용한 잡음 영역 추출 단계, 입력 영상의 부분 정보를 이용한 재구성과 이를 원본 영상과 합성하여 잡음이 제거된 영상을 생성하는 단계 등 총 5 단계로 구성된다. 실험결과는 제안된 방법이 입력 얼굴 영상들의 구조적 특징들은 잘 유지하면서 복합적인 칼라 잡음 등을 효과적으로 제거하는 것을 보인다.

• 한국정보통신학회논문지
• /
• 제27권1호
• /
• pp.8-14
• /
• 2023

기존의 자기지도 학습 기반의 CutPaste 기법은 정상 이미지에서 특정 패치를 자르고 붙이는 방법으로 합성 데이터를 생성한 뒤 이상탐지를 수행하였다. 그러나 이런 방식으로 생성된 합성데이터는 패치의 경계에 뚜렷한 차이가 나타나는 문제가 발생된다. 이러한 문제를 해결하기 위한 NSA 기법은 Poisson Blending을 통해 자연스러운 합성 데이터를 생성하여 더 높은 이상탐지 성능을 달성하였다. 그러나 NSA 기법은 클래스마다 조정해야하는 하이퍼 파라미터가 많은 단점을 가지고 있다. 본 논문에서는 합성 패치의 크기를 매우 작게 하는 단순한 방법으로 정상과 유사한 합성 데이터를 생성하였다. 이 때 패치가 매우 지역적으로 합성되기 때문에, 지역적인 특징을 학습하는 모델을 사용하면 합성 데이터에 쉽게 과적합 될 수 있다. 따라서 전역적인 특징을 학습하는 gMLP를 사용하여 이상탐지를 수행하였고, 단순한 합성 방법으로도 기존 자기 지도 학습 기법보다 더 높은 성능을 달성할 수 있었다.

• Journal of Photoscience
• /
• 제10권3호
• /
• pp.251-255
• /
• 2003

The composites fabricated by blending nonlinear optical (NLO) chromophore such as {4-[2-(4-nitrophenyl)-vinyl] phenyl}diphenylamine (NVPDA) with photoconducting crosslinkable matrix, bis-(4-ethynylphenyl)-(4-octyloxy-phenyl)amine (BEOPEA), showed photorefractive property. Many problems faced in typical organic photorefractive systems such as time-consuming chemical synthesis, difficulty in rational design, intrinsic instability and phase separation could be avoided by this fabrication method.