• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.6 no.1
• /
• pp.1-12
• /
• 2001

Tidal computations of $M_2,\;S_2,\; K_1$ and $O_1$ constituents in the northeast Asian sea are presented by blending the Topex/Poseidon (T/P) altimeter data into a hydrodynamic model with $5'{\times}5'$ resolution. A series of sensitivity experiments on a weighting factor, which is the control parameter in the blending method, are carried out using $M_2$ constituent. The weighting factor is set to be in inverse proportion to the square root of water depth to reduce noises which could occur in data-assimilative model by blending T/P data. Model results obtained by blending the T/P-derived $M_2,\;S_2,\; K_1$ and $O_1$ constituents simultaneously are compared with all T/P-track tidal data; Average values of amplitude and phase errors are close to zero. Standard deviations of amplitude and phase errors are approximately 2 cm and less than 10 degrees respectively. The data-assimilative model results show a quite good agreement with T/P-derived tidal data, particularly in shallow water region (h<250m). In deep water regions, T/P-derived tidal data show unreasonable spatial variations in amplitude and phase. The data-assimilative model results differ from T/P-derived data, but are improved to show reasonable spatial variations in amplitude and phase. In addition, the T/P-blended model results are in good agreement with coastal tide gauge data which are not blended into the model.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.448-453
• /
• 2003

In this study, the effects of oxygen component in fuel and exhaust gas recirculation(EGR) method on the exhaust emissions has been investigated for a D.I. diesel engine. It was tested to estimate change of exhaust emission characteristics for the commercial diesel fuel and oxygenate blended fuel which has five kinds of blending ratio. Dimethoxy methane(DMM) contains oxygen component 42.5% in itself. and it is a kind of effective oxygenated fuel for reduction of smoke emission. It was affirmed that smoke emission was decreased with increasing of DMM blending ratio. But, NOx emission was increased compared with commercial diesel fuel. It was needed a NOx reduction countermeasure that EGR method was used as a countermeasure for NOx reduction. It was found that simultaneous reduction of smoke and NOx emission was achieved with DMM blended fuel and cooled EGR method($10{\sim}15%$).

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.33 no.2
• /
• pp.24-31
• /
• 2001

As a novel method to improve strength properties of recycled test liner, Condebelt press drying system was introduced and adopted into Korea. New press drying treatment could enhance the surface and strength properties in accordance with the increase of sheet density. However, Condebelt drying can not increase the density of repeatedly recycled test liner as much as that of virgin UKP and at the same density condition, the strength of Condebelt press dried UKP is greater than that of press dried test liner. In order to increase the strength of test liner, two attempts were tried in this study. First, addition of polyelectrolytes, dry strength agent was investigated with a view to promote the fiber bonding potential of reclaimed corrugated container pulp. Second, blending effect of fines were analyzed in an aims of increasing density and strength of test liner. The results were as follows; Even in the case of test liner densified by Condebelt press dryer, addition of amphoteric PAM as a dry strength agent was effective in increasing strength properties and so the effect of dry strength agent on improving bonding potential of recycled OCC fiber could be confirmed. As an appropriate addition level of amphoteric PAM, below 1% based on dry pulp weight was suggested. Different from virgin UKP, density of recycled test liner can be increased by the blending of OCC fines and strength properties also can be improved. However, excessive blending of OCC fines could result in decreasing of density and serious weakening of test liner. The best blending ration of fines in test liner can be determined as about 30%. Taking into account the fines content in general OCC pulp as 50%, excessive 20% of fines were supposed to be fractionated and removed in order to achieve the best strength of Condebelt press dried test liner.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.5
• /
• pp.175-183
• /
• 2004

In this paper, we propose a new accurate and robust image mosaic technique of the mural underdrawing taken from the infra-red camera, which is based on multiple image registration and adaptive blending technique. The image mosaicing methods which have been developed so far have the following deficits. It is hard to generate a high resolution image when there are regions that do not have features or intensity gradients, and there is a trade-off in overlapping region size in view of registration and blending. We consider these issues as follows. First, in order to mosaic images with neither noticeable features nor intensity gradients, we use a projected supplementary pattern and pseudo color image for features in the image pieces which are registered. Second, we search the overlapping region size with minimum blending error between two adjacent images and then apply blending technique to minimum error overlapping region. Finally, we could find our proposed method is more effective and efficient for image mosaicing than conventional mosaic techniques and also is more adequate for the application of infra-red mural underdrawing mosaicing. Experimental results show the accuracy and robustness of the algorithm

• Journal of the Korean Society of Earth Science Education
• /
• v.8 no.1
• /
• pp.1-11
• /
• 2015

The purpose of this study was to find out about the awareness and demands of pre-service and in-service elementary school teachers on STEAM education. For the purpose of this study, researcher administered survey questionnaires were conducted for 160 pre-service teachers and 191 in-service teachers who were sampled by convenience sampling method. The results were as follows. On the awareness and demand for knowledge and necessity on STEAM, first, on the understanding related knowledge, most respondents have heard of STEAM education(97.7%), and well aware of STEAM(91.4%) through the teacher training course(80.3%). Second, on the necessity, 60.4% respondents were located in "very necessary" and "necessary" entry. On the awareness and demand for applying STEAM, first, on the reasons of applying STEAM was to help the cognitive and affective development. Also 67.3% respondents would like to apply STEAM on their science class. The reason was necessity on STEAM, and the most suitable subject for blending with science of applying to STEAM was technology, on the other hand the most difficult subject was art. Second, on the effect of STEAM, most respondents had positive awareness on the all categories. Third, on the purpose of science education, also had positive awareness on the all categories of the purpose of science education. On the awareness and demand for blending ways of STEAM and improvements, first, on the blending ways of STEAM, topic centered blending related to real life had a majority. Second, on the improvements, to improve the STEAM education, many respondents pointed out the development of teaching and learning STEAM program and dissemination of related resources.

• Proceedings of the Korea Contents Association Conference
• /
• 2008.05a
• /
• pp.648-652
• /
• 2008

We all know *.x file is a bridge of the 3D model developer and the game developer. In today's 3D game programming, more and more advanced hardware support it to run, but we still need to consider the methods to generate the animations. 3D model maker is tired of rectifying the skeletal animations. If he mistakes one point in some one animation, this will lead to distortion in *.x file. Then the modification consumes long time. So finding a good blending method is the best choice for generating multiple skeletal animations. There were some methods for animations blending. In this paper, we could use 3D max or Maya to blend animations; and we could use *.x file and blend animations in coding. And we will use 3D max 8.0 to export the *.x file and present a better way to combine skeletal animations.

• Journal of applied mathematics & informatics
• /
• v.32 no.5_6
• /
• pp.761-781
• /
• 2014

An exponentially accurate nonconforming spectral element method for elasticity systems with discontinuities in the coefficients and the flux across the interface is proposed in this paper. The method is least-squares spectral element method. The jump in the flux across the interface is incorporated (in appropriate Sobolev norm) in the functional to be minimized. The interface is resolved exactly using blending elements. The solution is obtained by the preconditioned conjugate gradient method. The numerical solution for different examples with discontinuous coefficients and non-homogeneous jump in the flux across the interface are presented to show the efficiency of the proposed method.

• Korea-Australia Rheology Journal
• /
• v.15 no.1
• /
• pp.43-50
• /
• 2003

In this study, two types of biodegradable resins-based clay nanocomposites, in which organic montmorillonite clay was filled, were prepared by the direct melt blending method. In order to characterize the nanocomposite structure, wide-angle X-ray diffraction (WAXD) and TEM observation were performed. Characterization of the nanocomposites shows that intercalated and partially exfoliated structures were generated by the melt blending method. Mechanical and rheological properties of the nanocomposites were measured respectively. For the mechanical properties, there were improvements in tensile strength and Young's modulus of the nanocomposites due to the reinforcement of nanoparticles. The rheological behaviors of the nanocomposites were significantly affected by the degree of the dispersion of the organoclay. The storage modulus of the nanocomposites was measured and the degree of the dispersion of the organoclay was evaluated from the value of the terminal slope of the storage modulus. In addition, the quantity of the shear necessary for making the nanocomposite for melt intercalation method was estimated from the relationship between the value of the terminal slope of the storage modulus and the applied shear.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.30 no.4 s.247
• /
• pp.358-363
• /
• 2006

In this study, the effects of oxygenated fuel such as ethylene glycol mono-normal butyl ether(EGBE) was investigated both DI and IDI diesel engine. Because EGBE includes oxygen content approximately 27.1 %, it is a kind of oxygenated fuel that the smoke emission of EGBE blending fuel is reduced remarkably compared with commercial diesel fuel. The focus of this study was to investigate the effects of the addition of oxygenated fuel to diesel fuel on the engine-out emissions and the performance. Smoke emissions of all EGBE blends were reduced substantially in comparison with conventional diesel fuel. This study showed that remarkable reduction of smoke with oxygenate blending fuels in diesel engines including DI and IDI combustion method. Besides, this study showed that simultaneous reduction of smoke and NOx emissions could be achieved by oxygenated fuel and EGR method that was applied to decrease NOx emissions increasing with smoke emissions reduction.

• Journal of Korean Society of Forest Science
• /
• v.76 no.2
• /
• pp.119-126
• /
• 1987

This study was carried out to elucidate the desirable PEG molecular weight and it's blending methods which can promote the dimensional stabilization of Corpus controversa, Quercus variabilis and Prunus sargentii. The results may be summarized as follows: 1. PEG polymer loading in woods was affected by specific gravity of wood. And the PEG polymer loading was satisfactory except in Quercus variabilis, which shows the blending method of PEG V was proper. 2. Bulking coefficiency of PEG V was high in Corpus controversa and Prunus sargentii, and it is necessary to paint or coat water-proofing wood preservative: for high bulking coefficiency of Quercus variabilis. 3. In the treatment of PEG V, the antishrink efficiency of Prunus sargentii was 82.59% and that of Quercus variabilis 62.79%. 4. Dimensional stabilization of hardwoods did not have apparant relation with PEG blending method. 5. Judging from results, PEG-400 and PEG-1000 would be enough for dimensional stabilization of hardwood having high specific gravity if other factors are considered well.