• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.41 no.4
• /
• pp.299-304
• /
• 2013

The HAN which is an ionic liquid is a non-toxic monopropellant with high storability, and its specific impulse can be increased by blending methanol, thereby it can substitute the hydrazine. The HAN was synthesized by acid-base reaction of hydroxylamine and nitric acid, and the blending ratio of HAN and methanol is 8.2:1. The iridium catalyst was used to decompose the HAN, and 1 N class thruster with shower head type injector having one orifice was used to evaluate the HAN/Methanol propellant. The thermal stability of distributor was increased by using ceramic material to endure the high temperature of product gas. The preheating temperature of catalyst should be $400^{\circ}C$ at least for the complete decomposition. The feeding pressure should be increased to increase the $C^*$ efficiency, thereby the decomposition performance was decreased upstream catalyst, and the performance of thruster was decreased. The fine metal mesh was inserted after the injector to improve the atomization of propellant, thereby it can settle the performance decrease problem. The phenomenon of performance decrease was remarkably improved owing to the insertion of fine metal mesh.

• Korean Journal of Food Science and Technology
• /
• v.42 no.6
• /
• pp.648-652
• /
• 2010

This study was performed to investigate PSL and TL characteristics for the detection of different ratios of gamma-irradiated turmeric. It was possible to determine PSL and TL of 1- and 10-kGy irradiated turmeric. The TL ratios ($TL_1/TL_2$) of non-irradiated samples were lower than 0.001, while those of irradiated samples were higher than 0.355. In the PSL results, blended samples containing irradiated ingredients showed intermediate values for a 1% blending rate. Furthermore, TL analysis of blended samples seems to offer a promising method for irradiation identification by TL glow curve form and temperature range. The 1- and 10-kGy irradiated samples were able to be detected above a 4% blending rate. However, the TL ratio appeared as a threshold value below 0.1 for irradiated samples. Overall, TL analysis identified 4% blended samples containing gamma-irradiated turmeric.

• Korean Journal of Agricultural Science
• /
• v.43 no.5
• /
• pp.788-793
• /
• 2016

Post-weaning diarrhea (PWD), mostly caused by enterotoxigenic Escherichia coli (ETEC), remains to be a major source of economic loss in swine industry. The use of the ETEC-oral challenge model is often applied to mimic unsanitary commercial swine farm conditions where pathogens and unknown complex microbes exist and can cause severe infections in pigs. The purpose of this study was (1) to estimate ETEC density using spectrophotometric computation, (2) to determine survivability of ETEC after storing at $-20^{\circ}C$ for 7 days, and (3) to evaluate survivability of ETEC after blending with diluted sweeteners (0, 5, 10, 20, and 40% sucrose in phosphate buffered saline [PBS]). Cell density was quantified using UV-VIS spectrophotometer and counting ETEC colony forming units (cfu) at 0, 30, 60, 90, 120, 150, 180, 210, and 240 min. The established linear equation ($y=0.0031x^2-0.0079x+0.0043$ and $y=0.0046x^2-0.0151x+0.0113$) was used for robust quantification of each ETEC cell density. ETEC stored at $-20^{\circ}C$ showed 108 cfu/mL after thawing and incubation. When ETEC was blended with sweeteners (20 and 40%), survival of ETEC was decreased by 58 and 54% in 5 min post blending. However, addition of 20% of sweetener resulted in a higher survivability than those with other media concentrations. Therefore, the use of ETEC-oral challenge model would be possible as a stable method if we could confirm the appropriate medium that increases survivability of ETEC in weaner pigs.

• Applied Chemistry for Engineering
• /
• v.4 no.3
• /
• pp.601-615
• /
• 1993

A series of polycarbonate(PC)/polyamide 6(PA6) blends were prepared by three different blending methods to investigate their compatibility. From the DSC results, all of these blends have two Tg's in their own Tg regions, and there was no significant depression of the melting point and the crystallization temperature of PA6. With respect to the microstructure of the blends by SEM, the phase separation occurred at very low blend compositions, PC/PA6=95/5 and 5/95, already. In addition, a method is proposed to determine the Flory-Huggins polymer-polymer interaction parameter(${\chi}_{12}$) in polymer blend systems by using the experimentally determined Tg's. The values of ${\chi}_{12}$ obtained were 0.0381, 0.0411, 0.0418, for solution casting, solution precipitation, and extrusion blending methods, respectively. These values were higher than the critical value of ${\chi}_{12}$,($({\chi}_{12})_c$, 0.0271). Therefore it was concluded that the PC/PA6 blend system have little compatibility.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.10 no.2
• /
• pp.152-160
• /
• 2000

This paper addresses the analysis and design of fuzzy-model-based controller for nonlinear systems using extended PDC and optimal pole-placement schemes. In the design procedure, we represent the nonlinear system using a Takagi-Sugeno fkzy model and formulate the controller rules by using the extended parallel distributed compensator (EPDC) and construct an overall fuzzy logic controller by blending all local state feedback controllers with an optimal pole-placement scheme. Unlike the commonly used parallel distributed compensation technique, by blending a newly extended parallel distributed compensator and the optimal poleplacement schemes, we can design not only a local stable k z y controller but also an overall stable fuzzy controller to perform the tacking control objective. Furthermore, a stability analysis is carried out not only for the fuzzy model but also for a real nonlinear system. Finally. the effectiveness and feasibility of the proposed fizzy model-based controller design method has been shown through a simulation example.

• Journal of the Korean Institute of Gas
• /
• v.9 no.4 s.29
• /
• pp.50-56
• /
• 2005

Liquefied Petroleum 6aso-PG) is combustible gas which used for fuel for domestic and automobiles. A research for adjust a component of LPG to improve the fuel characteristics and control the manufacturing process of that is carrying in petrochemical industry. Some kinds of LPG blending is considered as a adjusting method to control component of LPG. LPG is mainly propane for domestic use and butane for automobile use but propylene and butylene also a kind of LPG Change of explosion characteristic and combustion gas component by mixing of propylene in propane and butane was measured and analysed in this research. Based on the result of experiment, it was found that explosion pressure and pressure rise rate was slightly increased with mixing rate of propylene and it was considered the possibility of increasing the CO concentration in combustion gas with increase the mixing rate of propylene.

• Journal of Biomedical Engineering Research
• /
• v.34 no.3
• /
• pp.111-116
• /
• 2013

Finite element analysis(FEA) has been extensively applied in the analyses of biomechanical properties of stents. Geometrically, a closed-cell stent is an assembly of a number of repeated unit cells and exhibits periodicity in both longitudinal and circumferential directions. This study concentrates on various parameters of the FEA models for the analysis of drug-eluting biodegradable polymeric stents for application to the treatment of coronary artery disease. In order to determine the mechanical characteristics of biodegradable polymeric stents, FEA was used to model two different types of stents: tubular stents(TS) and helicoidal stents(HS). For this modeling, epigallocatechin-3-O-gallate (EGCG)-eluting poly[(L-lactide-co-${\varepsilon}$-caprolactone), PLCL] (E-PLCL) was chosen as drug-eluting stent materials. E-PLCL was prepared by blending PLCL with 5% EGCG as previously described. In addition, the effects of EGCG blending on the mechanical properties of PLCL were investigated for both types of stent models. EGCG did not affect tensile strength at break, but significantly increased elastic modulus of PLCL. It is suggested that FEA is a cost-effective method to improve the design of drug-eluting biodegradable polymeric stents.

• Journal of Digital Contents Society
• /
• v.19 no.7
• /
• pp.1341-1348
• /
• 2018

In this study, we propose a method for applying the image content to the exhibition space using projection mapping techniques. In a typical exhibition space, the artist exhibits works and displays them unilaterally and by using walls defined as screens. However, the new form of exhibition is not one-sided and changes in the way space is free from constraint. The purpose of the exhibition space is to use walls or various installations, which are elements of the exhibition space, as a key part of the exhibition rather than as a material for the spatial compartment. This type of display is a display element of space and you can enjoy the fun and excitement of the exhibition about the new environment. Various imaging techniques are required to construct an exhibition of images and spaces, among which edge blocking is not formed.

• The Journal of the Korea Contents Association
• /
• v.15 no.5
• /
• pp.1-17
• /
• 2015

In domestic game market, the video game market is getting smaller and also decreasing funds and high level developers. So we need the software that can help us to make more realistic and high quality contents by non-expert developer in poor environments. In this paper, we selected global studio's animations which were scored good evaluation by public and critics as a well-made emotional expression that can convey the emotion properly. We selected movements that express emotions from the animation scripts by using Ekman's 6 basic emotions and Greimas' dynamic predicate, and then we had analyzed and categorized with the data. We also analyzed the movements for which data we needed to create specific movements to express emotions by using 'Animation Layer' that used in Unity's blending process. And suggest concept of the program that to create the emotional expression movements by using those analyzed data.

• Membrane and Water Treatment
• /
• v.6 no.3
• /
• pp.205-224
• /
• 2015

A novel hydrophilic poly (vinylidene fluoride)/poly (p-phenylene terephthalamide) (PVDF/PPTA) blend membrane was prepared by in situ polycondensation of p-phenylene diamine (PPD) and terephthaloyl chloride (TPC) in PVDF solution with subsequent nonsolvent induced phase separation (NIPS) process. For comparison, conventional solution blend membrane was prepared directly by adding PVDF powder into PPTA polycondensation solution. Blend membranes were characterized by means of viscometry, X-ray photoelectron spectroscopy (XPS), Field Emission Scanning Electron Microscopy (FESEM). The effects of different blending methods on membrane performance including water contact angle (WCA), mechanical strength, anti-fouling and anti-compression properties were investigated and compared. Stronger interactions between PVDF and PPTA in in situ blend membranes were verified by viscosity and XPS analysis. The incorporation of PPTA accelerated the demixing rate and caused the formation of a more porous structure in blend membranes. In situ blend membranes exhibited better hydrophilicity and higher tensile strength. The optimal values of WCA and tensile strength were $65^{\circ}$ and 34.1 MPa, which were reduced by 26.1% and increased by 26.3% compared with pure PVDF membrane. Additionally, antifouling properties of in situ blend membranes were greatly improved than pure PVDF membrane with an increasing of flux recovery ratio by 25%. Excellent anti-compression properties were obtained in in situ blend membranes with a stable pore morphology. The correlations among membrane formation mechanism, structure and performance were also discussed.