• Korean journal of food and cookery science
• /
• v.21 no.6 s.90
• /
• pp.927-935
• /
• 2005

The objectives of this study were to investigate the soaking properties of the high-dietary fiber rice 'Goami 2'and to develop korean white Gruel prepared with Goami 2. With increasing soaking time at room temperature ($20^{\circ}C$), the water absorbing character of Goami 2 and Ilpum significantly increased during the first hour of soaking time, after which it remained constant. On the contrary, the hardness of Goami 2 and Ilpum significantly decreased with increasing soaking time until one hour, after which it remained constant. The properties of Korean white gruel were evaluated using two varieties of rice (Goami 2, Ilpum) and three blending times (10, 20 and 30 seconds respectively). The rice flour of Goami 2 for Korean white gruel showed a greater number of small particles (<20 $\mu$m) than that of Ilpum. Hunter a'and b'values of Korean white gruel prepared with Goami 2 were higher than that of Korean white gruel prepared with Ilpum. The consistency values on Bostwick consistometer of Korean white gruel prepared with Goami 2 were higher than those of Korean white gruel prepared with Ilpum. The texture of Korean white gruel was examined using a back extrusion rig. All of the rheological parameters of Korean white gruel prepared with Goami 2 were decreased with increasing blending time, while in llpum they were increased. In the sensory evaluation results, the overall acceptability of korean white gruel prepared with Goami 2 blended for 20sec showed the highest sensory scores and desirability.

• Restorative Dentistry and Endodontics
• /
• v.29 no.6
• /
• pp.520-531
• /
• 2004

The aim of this study was to investigate the effect of monomer and filler compositions on the rheological properties related to the handling characteristics of resin composites. Methods. Resin matrices that Bis-GMA as base monomer was blended with TEGDMA as diluent at various ratio were mixed with the Barium glass (0.7 um and 1.0 um), 0.04 um fumed silica and 0.5 um round silica. All used fillers were silane treated. In order to vary the viscosity of experimental composites, the type and content of incorporated fillers were changed, Using a rheometer, a steady shear test and a dynamic oscillatory shear test were used to evaluate the viscosity ($\eta$) of resin matrix, and the storage shear modulus (G'), the loss shear modulus (G"), the loss tangent ($tan{\delta}$) and the complex viscosity (${\eta}^*$) ofthe composites as a function of frequency ${\omega}{\;}={\;}0.1-100{\;}rad/s$. To investigate the effect of temperature on the viscosity of composites, a temperature sweep test was also undertaken. Results. Resin matrices were Newtonian fluid regardless of diluent concentration and all experimental composites exhibited pseudoplastic behavior with increasing shear rate. The viscosity of composites was exponentially increased with increasing filler volume%. In the same filler volume, the smaller the fillers were used, the higher the viscosities were. The effect of filler size on the viscosity was increased with increasing filler content. Increasing filler content reduced $tan{\delta}$ by increasing the G' further than the G". The viscosity of composites was decreased exponentially with increasing temperature.

• Polymer(Korea)
• /
• v.38 no.1
• /
• pp.69-73
• /
• 2014

In this study, polysaccharide-poly(vinyl alcohol) (PVA) hydrogels were prepared by using ${\gamma}$-ray and evaluated for potential application as an anti-inflammation patch. Ulmus davidiana var. japonica (UD), one of polysaccharides has been particularly used as an oriental remedy for the treatment of inflammation and ulcers. PVA as a biocompatible polymer and glycerin as a moisturizer were blended with the UD, and its hydrogels were prepared by radiation crosslinking. Characterizations for UD hydrogels were performed by using cytotoxicity assay, antioxidant activity test, and physicochemical test such as gel fraction ratio, and swelling behavior. The results showed that these UD hydrogels had excellent physical properties, anti-inflammation activity, and non-cytotoxicity on the cells. Therefore, these polysaccharide based-UD hydrogels can be effectively used as an inflammation patch.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2019.04a
• /
• pp.43-43
• /
• 2019

Deparia pycnosora (Christ) M. Kato is a fern used as ornamental plant. In addition, it is called "Teol-go-sa-ri" in Korean name. The aim of this study was to develop a practical propagation method of D. pycnosora using tissue culture technique. Prothallus obtained from spore germination was the used as experiment materials. The prothalli (300 mg) used in all experiments were sub-cultured for 8-week intervals. The most suitable media for prothallus propagation were identified by culturing 300 mg of prothalli in $1/4{\times}$, $1/2{\times}$, $1{\times}$, $2{\times}$ MS medium and in Knop medium for 8 weeks. Also, the prothalli were cultured by chopping with a scalpel. In addition, sucrose, activated charcoal, and total nitrogen source were added in different concentrations based on the culture medium selected. Cultures were maintained at a temperature of $25{\pm}1^{\circ}C$, light intensity of $30{\times}1.0{\mu}mol-m-2{\cdot}s-1$, and a photoperiod of 16/8 h (light/dark) in in vitro. The results showed that optimum was achieved prothallus fresh weight and development in $1{\times}$ MS medium. When other components were added to the basic $1{\times}$ MS medium, prothallus propagation was maximized in $1{\times}$ MS medium supplemented with 2% sucrose, 0.2% activated charcoal, and 60 mM total nitrogen. To select a suitable soil mixture for sporophyte formation, 1.0 g of prothallus was blended with distilled water, spread on five combinations of different soil substrates (decomposed granite, horticultural substrates, peat moss, and perlite), and cultivated for 12 weeks. The sporophyte cultures were maintained at a temperature of $25{\pm}1^{\circ}C$, light intensity of $43{\pm}2.0{\mu}mol-m-2{\cdot}s-1$, humidity of $84{\pm}1.4%$, and a photoperiod of 16/8 h (light/dark). As a results, horticultural substrate alone, 2:1 (v:v) mixtures of horticultural substrate and perlite, and 2:1 mixtures of horticultural substrate and decomposed granite induced 208.0, 201.3 and 248.8 sporophytes per pot, respectively. Therefore, this result could provide a practical mass propagation method of D. pycnosora

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.1
• /
• pp.184-188
• /
• 2019

The purpose of this paper is to investigate the effectiveness of Google Classroom (GC) and to examine the satisfaction of professors using GC as an online environment at a Mongolian University. Fourteen professors designed the lecture model and provided lessons using GC at D University for four weeks. GC provides new learning opportunities that are more efficient than face-to-face learning, because it can overcome the limitations of time and space. The results of the survey conducted with the professors who participated in the class to explore the effectiveness of GC show that the system provides: cooperation: 100% (strongly agree=7, Agree=7), personal learning opportunity: 100% (strongly agree=10, Agree=4), ease in learning: 100% (strongly agree=11, Agree=3), suitability: 100% (strongly agree=8, Agree=6), feedback opportunities: 100% (strongly agree=7, Agree=7), connection: 100% (strongly agree=7, Agree=7), accessibility: 100% (strongly agree=7, Agree=7), learning effectiveness: 100% (strongly agree=9, Agree=5), paperless experience: 100% (strongly agree=8, Agree=6). The professors who attended the class reacted positively to the use of GC, proving that the application of GC at this Mongolian University was appropriate and efficient. The use of GC is expected to help educational institutions strengthen and improve online learning, especially by breaking from traditional learning, and opening new paths for professors and students in Mongolia.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.1
• /
• pp.22-28
• /
• 2019

Cement is a basic material for the construction industry and it requires high temperature sintering when manufacturing cement. $CO_2$ emissions from raw materials and fuels are recognized as new environmental problems and efforts are underway to reduce them. Techniques for reducing $CO_2$ in concrete are also recommended to use blended cement such as blast furnace slag or fly ash. In addition, the construction waste generated in the dismantling of concrete structures is recognized as another environmental problem. Thus, various methods are being implemented to increase the recycling rate. The purpose of this study is to utilize the inorganic raw materials generated during the dismantling of the structure as a raw material for the low carbon type cement binder. Such as, waste concrete powder, waste cement block, waste clay brick and waste textile as raw materials for low carbon type cement binder. From the research results, low carbon type cement binder was manufactured from the raw material composition of waste concrete powder, waste cement block, waste clay brick and waste textile.

• Membrane and Water Treatment
• /
• v.10 no.3
• /
• pp.207-212
• /
• 2019

Non-aqueous solvents (NASs) are generally known to be barely miscible, and reactive with polar compounds, such as water. However, water can interact with some NASs, which can be used as a new means for water recovery from saline water. This study explored the fate of water and salt in NAS, when saline water is mixed with NAS. Three amine solvents were selected as NAS. They had the same molecular formula, but were differentiated by their molecular structures, as follows: 1) NAS 'A' having the hydrophilic group ($NH_2$) at the end of the straight carbon chain, 2) NAS 'B' with symmetrical structure and having the hydrophilic group (NH) at the middle of the straight carbon chain, 3) NAS 'C' having the hydrophilic group ($NH_2$) at the end of the straight carbon chain but possessing a hydrophobic ethyl branch in the middle of the structure. In batch experiments, 0.5 M NaCl water was blended with NASs, and then water and salt content in the NAS were individually measured. Water absorption efficiencies by NAS 'B' and 'C' were 3.8 and 10.7%, respectively. However, salt rejection efficiency was 98.9% and 58.2%, respectively. NAS 'A' exhibited a higher water absorption efficiency of 35.6%, despite a worse salt rejection efficiency of 24.7%. Molecular dynamic (MD) simulation showed the different interactions of water and salts with each NAS. NAS 'A' formed lattice structured clusters, with the hydrophilic group located outside, and captured a large numbers of water molecules, together with salt ions, inside the cluster pockets. NAS 'B' formed a planar-shaped cluster, where only some water molecules, but no salt ions, migrated to the NAS cluster. NAS 'C', with an ethyl group branch, formed a cluster shaped similarly to that of 'B'; however, the boundary surface of the cluster looked higher than that of 'C', due to the branch structure in solvent. The MD simulation was helpful for understanding the experimental results for water absorption and salt rejection, by demonstrating the various interactions between water molecules and the salts, with the different NAS types.

• Korean Journal of Plant Resources
• /
• v.32 no.4
• /
• pp.290-295
• /
• 2019

This study was carried out to select the optimal condition for prothallus propagation and sporophyte formation of Leptogramma pozoi (Lag.) Ching subsp. mollissima (Fisch. ex Kunze) Nakaike and to provide basic data for mass production system. In the propagation, 300 mg of prothallus were inoculated in different kinds of medium [1/4, 1/2, Murashige and Skoog (MS), Knop], sucrose (0, 1, 2, 3, 4%), and cultured for 8 weeks. Sporophyte formation studies were carried out by inoculating blended prothallus into artificial soils. The soils were mixed with horticultural substrate, peatmoss, perlite, and decomposed granite at different ratios or only with the horticultural substrate. Then the prothallus was cultivated for 12 weeks to figure out the formation and growth of the sporophytes. The growth and development of prothalli were excellent on MS medium. According to medium components, prothallus growth was favorable in all treatments except 0% sucrose treatment and the highest in 2% sucrose. In the experiment of soil mixtures, sporophyte formation was the highest in the horticultural substrate:perlite 2:1 (v:v) and horticultural substrate:decomposed granite 2:1 (v:v) treatment, and the overall growth was good in the horticultural substrate:decomposed granite 2:1 (v:v) mixed soil.

• Clean Technology
• /
• v.26 no.4
• /
• pp.304-310
• /
• 2020

In order to apply a photocatalyst (TiO2) to various building materials, TiO2-mayenite was prepared in this study. The TiO2 was synthesized using the sol-gel method by fixing titanium isopropoxide (TTIP) and urea at a ratio of 1 : 1. Later, they were calcined in a temperature range of 400-700 ℃ to analyze the properties according to temperature. BET, TGA, and XRD were used to analyze the physical and chemical properties of TiO2. The nitrogen oxide removal test was confirmed by measuring the change in the concentration of NO for 1 h according to KS L ISO 22197-1. The prepared TiO2 samples exhibited an anatase crystal structure below 600 ℃, and TiO2 (urea)-400 showed the highest nitrogen oxide removal rate at 2.35 µmol h-1. TiO2-mayenite was prepared using two methods: spraying TiO2 dispersion solution (s/s) and sol-gel solution (g/s). Through BET and XRD analysis, it was found that 5-TiO2 (g/s) prepared by spraying a sol-gel solution has maintained its crystallinity even after heat treatment. Also, 5-TiO2 (g/s)-500 showed the highest removal rate of 0.55 µmol h-1 in the nitrogen oxide removal test. To prepare TiO2-mayenite, it was confirmed that mayenite should be blended with TiO2 in a sol-gel state to maintain the crystal structure and exhibit a high nitrogen oxide removal rate.

• Journal of the Korea Institute of Building Construction
• /
• v.22 no.6
• /
• pp.663-672
• /
• 2022

The purpose of this study is to evaluate the magnesium sulfate resistance of a geopolymer mixed with rice husk powder. General concrete, silica fume mixed concrete, and binary blended geopolymer were selected as comparison targets to confirm the magnesium sulfate resistance, and sulfate deterioration was calculated using the compressive strengths with ages. In addition, the weight change rate and the relative dynamic coefficient of the geopolymer were comparatively analyzed, and the degree of etteringite formation was confirmed using X-ray diffraction analysis. the experiment, the geopolymer mixed with 10% rice husk powder showed 10.8% higher compressive strength than concrete with silica fume when submerged for 56 days. Also, the geopolymer mixed with rice husk powder showed a small weight change rate of 0.9 to 1.45%. composition after immersion in magnesium sulfate through X-ray diffraction analysis, it was observed that a small amount of ettringite was dispersed in the geopolymer containing rice husk powder. Thus, there is a high correlation with the corrosion resistance of magnesium sulfate