• Structural Engineering and Mechanics
• /
• 제32권2호
• /
• pp.251-267
• /
• 2009

Reinforced concrete (RC) structures consist of two different materials: concrete and steel bar. The stress transfer behaviour between the two materials through bond plays an important role in the load-carrying capacity of RC structures, especially when they subject to lateral load such as blast and seismic load. Therefore, bond and slip between concrete and reinforcement bar will affect the response of RC structures under such loads. However, in most numerical analyses of blast-induced structural responses, the perfect bond between concrete and steel bar is often assumed. The main reason is that it is very difficult to model bond slip in the commercial finite element software, especially in hydrodynamic codes. In the present study, a one-dimensional slide line contact model in LS-DYNA for modeling sliding of rebar along a string of concrete nodes is creatively used to model the bond slip between concrete and steel bars in RC structures. In order to model the bond slip accurately, a new approach to define the parameters of the one-dimensional slide line model from common pullout test data is proposed. Reliability and accuracy of the proposed approach and the one-dimensional slide line in modelling the bond slip between concrete and steel bar are demonstrated through comparison of numerical results and experimental data. A case study is then carried out to investigate the bond slip effect on numerical analysis of blast-induced responses of a RC column. Parametric studies are also conducted to investigate the effect of bond shear modulus, maximum elastic slip strain, and damage curve exponential coefficient on blast-induced response of RC columns. Finally, recommendations are given for modelling the bond slip in numerical analysis of blast-induced responses of RC columns.

• 한국전산구조공학회논문집
• /
• 제35권3호
• /
• pp.141-148
• /
• 2022

본 논문에서는 축하중과 폭발하중을 동시에 받는 철근콘크리트 부재의 구조 거동을 분석하였다. 기본적인 폭발하중을 받는 패널 실험 데이터, 축하중과 폭발하중을 받는 철근콘크리트 기둥 실험데이터를 이용하여 비선형 동적해석 모델링을 검증하였다. 축하중의 적용에 있어서 Autodyn은 동적해석만을 위한 프로그램이기 때문에 축하중과 같은 정적 하중에 대한 초기 응력 상태를 모사하는 해석 절차를 제시하였다. 축하중비 0%~70% 구간과 TNT 등가량에 의존한 환산거리 1.1~2.0에 해당하는 매개변수를 선정하여 총 80개의 비선형 동적 유한요소해석을 진행하였다. 축하중비와 환산거리의 변화를 통해 손상정도와 최대 변위 및 회전각으로 구조 거동을 비교 분석한 결과로 원거리 폭발하중에서 축하중을 받는 기둥의 강성 증가로 최대 변위가 감소한다. 결과적으로 축하중비 10%~30%, 30%~50%, 50% 이상의 영역 3가지로 구조적 거동 분류가 가능함에 따라 내폭 설계 모델 개발에 활용될 수 있을 것으로 보인다.

• 한국항공우주학회지
• /
• 제33권7호
• /
• pp.33-39
• /
• 2005

총구로부터 방출되는 폭발파에 대한 수학적 모델(GUNBLAST)을 수립하였으며, 폭발 하중에 대한 구조 응답 해석을 수행하였다. 폭발파는 자유영역 폭발파와 반사 폭발파로 구분되어질 수 있다. 본 연구에서는 스케일 기법을 이용하여 자유영역 폭발파 모델을 수립하였으며, 경사 충격파 이론과 전산유체역학(Computational Fluid Dynamics) 계산을 통하여 반사 충격파를 계산하였다. GUNBLAST는 두 가지의 구조 모델에 적용되었으며 구조 표면으로부터의 총구거리 변화에 따른 폭발파 특성을 파악하기 위하여 평판에 대한 적용을 통하여 균일하중조건과의 비교를 수행하였다. 또한 MSC/NASTRAN을 이용하여 12.7mm 기총을 장착한 비행기 날개 모델의 과도 응답 해석을 수행하였다. 결과적으로 이러한 폭발파는 랜덤진동과 항공기에 탑재된 장비에 고주파의 손상을 일으킬 수 있음을 확인하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제26권5호
• /
• pp.151-160
• /
• 2022

최근 폭발사고의 빈도수가 증가함에 따라 주요 구조부재의 손상을 저감시킬 수 있는 방호 구조물 설계에 대한 관심이 높아지고 있다. 그러나, 방호 구조물의 방호성능에 대한 국내 연구는 아직 미진한 실정이며, 아직 설계 가이드라인도 충분히 갖추어지지 못한 실정이다. 따라서, 본 연구에서는 FRP 시트 보강유무를 변수로 하여 RC 방호벽에 대한 해석적 연구를 수행하였다. 해석은 LS-DYNA 프로그램을 활용하여 수행되었으며, 해석을 통해 RC 방호벽과 FRP 시트로 보강된 RC 방호벽의 변위-시간이력곡선, 압력-충격량 도표, 취약도 곡선을 도출하였다. FRP 시트 보강방법은 RC 방호벽의 방호성능을 향상시키는데 매우 효율적인 것으로 나타났다. 또한, 폭발하중의 크기가 클수록 RC 방호벽에 대한 FRP 시트의 보강효과는 높아지는 것으로 나타났다.

• 한국안전학회지
• /
• 제31권3호
• /
• pp.8-15
• /
• 2016

The purpose of this study is to design a model with the structural stability so as not to lose the operational function due to structural plastic or fail of a sliding blast door by blast pressure to this aim, a numerical simulation was performed using full-size experiments and M&S (Modeling & Simulation) of the sliding blast door. The sliding blast door ($W3,000{\times}H2,500mm$) under the blast load is in the form of a sliding type 2-way metal grill, which was applied by a design blast pressure (reflected pressure $P_r$) of 17 bar. According to the experimental results of a real sliding blast door under blast load, the blast pressure reached the sliding blast door approximately 4.3 ms after the explosion and lasted about 4.0 ms thereafter. The maximum blast pressure($P_r$) was 347.7 psi (2,397.3 kPa), it is similar to the UFC 3-340-02 of Parameter(91 %). In addition, operation inspection that was conducted for the sliding blast door after real test showed a problem of losing the door opening function, which was because of the fail of the Reversal Bolt that was installed to prevent the shock due to rebound of the blast door from the blast pressure. According to the reproduction of the experiment through M&S by applying the blast pressure measurement value of the full-size experiments, the sliding blast door showed a similar result to the full-size experiment in that the reversal bolt part failed to lose the function. In addition, as the pressure is concentrated on the failed reversal bolt, the Principal Tensile Failure Stress was exceeded in only 1.25 ms after the explosion, and the reversal bolt completely failed after 5.4 ms. Based on the result of the failed reversal bolt through the full-size experiment and M&S, the shape and size of the bolts were changed to re-design the M&S and re-analyze the sliding blast door. According to the M&S re-analysis result when the reversal bolt was designed in a square of 25 mm ($625mm^2$), the maximum pressure that the reversal bolt receives showed 81% of the principal tensile failure stress of the material, in plastic stage before fail.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.522-525
• /
• 2006

This study is intended to discuss the application of blast slag for concrete to improve the durability of precast concrete box culvert. The precast concrete box culverts with blast slag are tested to verify the effect of early strength. The results show that the initial cracking load and yielding load of the blast slag concrete members are increased when they are compared with those of the normal concrete. In the prototype precast concrete box culvert experiment, initial crack control effect and ductility index are increased. It can be concluded that the use of blast slag was improved the durability in precast concrete box culvert.

• Structural Engineering and Mechanics
• /
• 제42권3호
• /
• pp.363-381
• /
• 2012

This study is aimed at providing an efficient analytical model to obtain pressure- impulse diagram of one-way reinforced concrete slabs subjected to different shapes of air blast loading using single degree of freedom method (SDOF). A tri-linear elastic perfectly plastic SDOF model has been used to obtain the pressure-impulse diagram to correlate the blast pressure and the corresponding concrete flexural damage. In order to capture the response history for the slab, a new approximately SDOF method based on the conventional SDOF method is proposed and validated using published test data. The influences of pulse loading shape on the pressure-impulse diagram are studied. Based on the results, a pressure-impulse diagram generation method using SDOF and an analytical equation for the pressure-impulse diagram is proposed to different damage levels and different blast loading shapes.

• 한국전산구조공학회논문집
• /
• 제12권3호
• /
• pp.353-362
• /
• 1999

본 연구에서는 콘크리트 중력식 댐의 임계균열길이가 계산되었으며 또한 복합균열의 균열선단에서 유효응력 확대계수의 변화량이 조사되었다. 작용하중으로는 댐 상부면에 작용하는 정수압과 댐의 균열면에 작용하는 수압 및 자중으로 구성된 정하중, 그리고 댐 주위에서 발파작업이 수행되는 경우에 고려될 수 있는 발파진동 및 동수압으로 구성된 동하중이 사용되었다. 균열이 발생한 위치와 방향 및 발파진동의 크기에 따라 임계균열길이가 계산되었으며, 또한 복합균열의 형태 및 균열선단 간의 이격거리에 따른 유효응력확대계수의 변화량이 검토되었다.

• 대한조선학회논문집
• /
• 제57권2호
• /
• pp.70-79
• /
• 2020

The offshore installation units may be subjected to various accidental loads such as collision from supply vessels, impact from dropped objects, blast load from gas explosion and thermal load from fire. This paper deals with the design and strength evaluation method of the stiffened plate structures in response to a blast load caused by a gas explosion accident. It is a comprehensive review of various items used in actual project such as the size and type of the explosive loads, general design procedure/concept and analysis method. The structural analyses using simple analysis methods based on SDOF model and nonlinear finite element analysis are applied to the particular FPSO project. Also validation studies on the design guidance given by simple analysis method based on SDOF model have also considered several items such as backpressure effects, material behavior and duration time of the overpressure. A good correlation between the prediction made by simple analysis method based on SDOF model and nonlinear finite element analysis can be generally obtained up to the elastic limit.

• 복합신소재구조학회 논문집
• /
• 제3권4호
• /
• pp.10-16
• /
• 2012

This study presents the effectiveness of a composite structure at improving blast resistance. The proposed composite structure consists of carbon fiber reinforced polymer (CFRP) and steel layers. While CFRP layer is used for blast energy reflection due to its high strength, steel layer is used for blast energy absorption due to its high ductility. A dynamic model is used to simulate the elastoplastic behavior of the proposed composite structure subject to blast load. Considering the magnitude variations of a blast event, the probability of failure of each layer is evaluated using reliability analysis. By assigning design probability of failure of each layer in the composite structure, the thickness of layers is optimized. A case study for the design of CFRP-steel composite structure subjected to an uncertain blast event is also presented.