• 제목/요약/키워드: Blade part

검색결과 243건 처리시간 0.026초

원심압축기 유동해석 및 소음예측에 관한 연구 (Flow-field Analysis and Noise Prediction of Centrifugal Compressor)

  • 선효성;신인환;이수갑
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2002년도 춘계학술대회논문집
    • /
    • pp.1005-1009
    • /
    • 2002
  • The objective of this research is to suggest the noise prediction method of the centrifugal compressor. It is focused on the Blade Passing Frequency (BPF) component which is regarded as the main part of the rotating impeller noise. Euler solver is used to simulate the flow-field of the centrifugal compressor and time-dependent pressure data are calculated to perform the near-field noise prediction by Ffowcs Williams-Hawkings (FW-H) formulation. Indirect Boundary Element Method (IBEM) is applied to consider the noise propagation effect. Pressure fluctuations of the inlet and the outlet in the centrifugal compressor impeller are presented and Sound Pressure Level (SPL) prediction results are compared with the experimental data.

  • PDF

벼의 관수시 Peroxidase 활성도 및 Banding Pattern의 품종간 차이 (Varietal Differences of Peroxidase Activites and Banding Pattern of Rice Plants under Flooding)

  • 강양순;남민희
    • 한국작물학회지
    • /
    • 제34권3호
    • /
    • pp.270-273
    • /
    • 1989
  • 벼 품종의 관수저항성 관련 특성을 검토코자 24일묘를 3일간 관수처리하여 뿌리와 엽신의 POD 비활성도 및 POD 동위효소들을 PAGIF법으로 전기영동하여 본 결과 관수저항성이 상대적으로 약한 일본형품종들은 통일형이나 인도형품종들보다 POD 비활성도가 높았으며 또한 관수처리로 일본형품종들의 엽신부에서는 무관수시 어느 부위에서도 나타나지 않았던 POD 동위효소의 특이 band가 등전점 9부근에서 출현하였다.

  • PDF

초경날식 절삭형 완패스정미기의 개발 (Development of One-Pass Rice Whitener with Cutting Blades of Hard Metal)

  • 정종훈
    • Journal of Biosystems Engineering
    • /
    • 제22권2호
    • /
    • pp.199-209
    • /
    • 1997
  • A one-pass rice whitener with hard metal blades was developed to solve the problems of the existing one-pass rice whitener. The developed one-pass rice whitener was tested and improved through various milling experiments. It showed high performance such as the capacity of 3.5 t/h, the energy consumption of $1.0 kWh/100kg$, milled rice recovery of 91.6%, broken rice rate of 2.2%, the crack rate of 1.9% at the 750 rpm of the roller shaft, compared with those other domestic and foreign one-pass rice whiteners. Especially, it could whiten broun rice of high moisture (16~l7%) with water sprayed at low internal pressure of less than $0.2 kg/cm^2$ and low temperature due to the characteristics of the cutting part composed of 24 hard metal blades. The developed one-pass rice whitener was industrilized and distributed to some rice processing complexs in one fourth price compared with that of imported one-pass rice whiteners.

  • PDF

5축 CNC가공의 검증에 관한 연구 (A Study on the Verification of 5-Axis CNC Machining)

  • 김찬봉;양민양
    • 대한기계학회논문집
    • /
    • 제18권1호
    • /
    • pp.93-100
    • /
    • 1994
  • 5-axis CNC machining is being used in the manufacturing of tire mold, screw, and turbine blade because it can produce complex workpiece more efficiently and accurately than 3-axis CNC machining does. However, it is difficult to calculate the CL data in 5-axis CNC machining. This paper describes an efficient method to modify and edit the NC code and a data structure for representation of the workpiece produced by 5-axis CNC machining. Wireframe display of tool path and shading display of workpiece are used to represent verification results. Machining errors can be evaluated quantitively using the data structure based on the workpiece data model. The methods are implemented in a program with a IBM-PC and MS-Windows.

클로펌프 회전자 설계에 대한 고찰 (Consideration on the rotor design of a claw pump)

  • 인상렬
    • 한국진공학회지
    • /
    • 제8권3B호
    • /
    • pp.257-261
    • /
    • 1999
  • The claw pump, one of oil-less dry pumps developed to solve problems found in vacuum systems pumped by oil-sealed rotary pumps, has been widely used separately or as a part of compound structure with a roots pump. The claw pump has some merits such as a high pumping speed, a high compression ratio, and relatively little heat generation. The high compression ratio of the claw pump is compression ratio, and relatively little heat generation. The high compression ratio of the claw pump is based on efficient sweeping action of the special type rotor and an intrinsic self-valving mechanism. The contour of the rotor with claw-type blade is designed basically to make two rotors revolve smoothly without touching with each other, and related dimensions are determined by required pumping speed, compression ratio, power demand and diameter of the rotor axis. In this paper the procedure of designing the rotor of the claw pump is described and factors influencing the pump performance are analyzed.

  • PDF

Hydraulic performance and flow resistance tests of various hydraulic parts for optimal design of a reactor coolant pump for a small modular reactor

  • Byeonggeon Bae;Jaeho Jung;Je Yong Yu
    • Nuclear Engineering and Technology
    • /
    • 제55권3호
    • /
    • pp.1181-1190
    • /
    • 2023
  • Hydraulic performance and flow resistance tests were performed to confirm the main parameters of the hydraulic instrumentation that can affect the pump performance of the reactor coolant pump. The flow resistance test offers important experimental data, which are necessary to predict the behavior of the primary coolant when the circulation of the reactor coolant pump is stopped. Moreover, the shape of the hydraulic section of the pump, which was considered in the test, was prepared to compare the mixed-flow- and axial-flow-type models, the difference in the number of blades of the impeller and diffuser, the difference in the shape of the impeller blade and its thickness, and the effect of coating at the suction bell. Additionally, five models of the hydraulic part were manufactured for the experiments. In this study, the differences in performance owing to the design factors were confirmed through the experimental results.

충주 숭선사지 출토 철제유물의 미세조직 분석 (Microstructure investigation of iron artifacts excavated from Sungseonsa Temple in Chungju city)

  • 유재은;고형순;이재성
    • 보존과학연구
    • /
    • 통권24호
    • /
    • pp.187-213
    • /
    • 2003
  • Sungseonsa Temple site in Chungju city in Chungcheongbuk-doProvince is written in "Goryeosa" as a building for Queen Sinmyeongsunseong, the mother of Gwangjong in AD 954 in Goryeo Dynasty. The museum in Chungcheong University takes charge of the excavation for 3 times from 2000 to 2002 and identified that its construction was carried out till Joseon Dynasty. Among the iron artifacts from the first excavation such as a weeding hoe, a hand knife, a lock, two nails and a plow which had conservation treatments, the sample was collected. Its micro-structure and method of manufacture were investigated. Excavation report for those artifacts has not published yet, therefore, the date of each artifacts is not clearly confirmed. The samples were collected from each part of the objects and then embedded in epoxy resin and etched with nitric acid. The examination of its microstructure is carried out under the microscope and the hardness values were measured by Vickers hardness tester. From the results, some artifacts show different manufacture method sin the each parts. The forming processes of the iron weeding hoe and the iron sickle are similar but the blade of iron weeding hoe was strengthened by carbonization whereas the blade of the iron sickle was done by quenching. The hand knife and the nails were produced through almost same methods and shows similar microstructures. The hand knife seems to be made by repeated beating and folding in low temperature resulting in fine crystallization, but the nail shows large crystallization due to processes in high temperature. Lock is made of white cast iron, that does not show any heat treatment.

  • PDF

CFRTP 소재 가공을 위한 초음파 나이프 적용 가능성에 관한 연구 (A Study on the applicability of ultrasonic knife for processing CFRTP materials)

  • 송기혁;김혜진;박지영;성시명
    • Design & Manufacturing
    • /
    • 제17권2호
    • /
    • pp.9-14
    • /
    • 2023
  • In this study, an experiment was conducted to confirm the applicability of the external shape control of the ultrasonic knife to the CFRTP material, which is the base material of thermoplastic. TC910 based on polyamide6 (PA6) was used as the material. The slope 와 and tool transfer speed of the material and tool were selected as process factors for processing, and the following results were obtained. Under all cutting conditions using an ultrasonic knife, friction heat caused by high-frequency vibration was issued at 150℃ at the contact part between the material and the knife during cutting. As a result of the cutting force analysis, the faster the transfer speed, the higher the cutting force as the angle of entry of the blade increased, and the size of the cutting force changed during cutting. As for the size of the burr in accordance with the transfer speed condition, the smallest burr occurred at 150mm/min in the side part, and the smallest burr occurred at 150mm/min and 200mm/min in the case of the outlet burr. The size of the burr according to the entry angle tended to decrease as the tool entry angle increased, and the side part tended to increase as the tool entry angle increased. As a result of the cutting surface analysis, it was confirmed that the base material was eluted under all conditions, and the faster the transfer speed, the lower the elution phenomenon of the base material. Based on the above results, cutting the CFRTP material with an ultrasonic knife is possible, but the effect on heat generation caused by friction needs to be minimized, and further research needs to be conducted on this.

소형 풍력 터빈 블레이드 재료로서 블래더 가압 방식 몰드 성형 프리프레그의 타당성 (Feasibility of Bladder Compression Molded Prepreg as Small Wind Turbine Blade Material)

  • 이보건;서성원;송명호
    • 한국전산구조공학회논문집
    • /
    • 제33권2호
    • /
    • pp.95-101
    • /
    • 2020
  • 풍력터빈 블레이드는 바람의 운동에너지를 축일로 변환하는 장치로서 상대적으로 고속 회전하면서 양력과 항력의 다양한 하중 조합과 진동에 견딜 수 있도록 내구 강도가 큰 경량의 재료를 선택하여 강성을 증가시키는 구조를 갖도록 설계되어야 한다. 본 연구는 CFRP 프리프레그를 사용하여 소형 풍력 블레이드를 제작하는 경우 공정 시간을 단축하는 기술을 개발하려는 목적으로 수행되었다. QBlade 수치해석 프로그램을 사용하여 블레이드의 형상을 결정하였다. 주어진 풍속에서 바람에 의해 부가되는 양력과 항력을 계산하는 유체역학 수치해석을 수행하고, 대표적인 블레이드 구조에 대해 블레이드 외피 재료에 가해지는 폰미세스 응력을 예측하는 재료역학 수치해석을 수행하였다. 인장 강도 시험의 불확실도를 개선하기 위해 ASTM D638 규정을 수정하여 새로운 시편의 형상을 제안하였고, 기존 형상의 인장 강도와 유사한 평균값을 얻되 파단 위치의 재현성이 향상됨을 확인하였다. 일련의 실험을 통해 소형 풍력블레이드의 제작에 블래더 가압 방식을 적용하면 충분한 내구 강도를 확보하면서 공정시간을 단축할 수 있음을 확인하였다.

Exclusion of Na+ and ClIons by the central parenchyma in leaf sheaths of rice and the involvement of lamina joint

  • Neang, Sarin;Kano-Nakata, Mana;Yamauchi, Akira;Itani, Tomio;Maekawa, Masahiko;Mitsuya, Shiro
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2017년도 9th Asian Crop Science Association conference
    • /
    • pp.237-237
    • /
    • 2017
  • Rice is highly sensitive to salt stress especially in its early growth stage, which thus is one of the major constraints in rice production. In rice plants, salt sensitivity is associated with the accumulation of $Na^+$ in the shoots, especially in the photosynthetic tissues. High salt concentrations in soil cause high $Na^+$ and $Cl^-$ transport to the shoot and preferential accumulation of those ions in older leaves, which decreases $K^+$ in the shoot, photosynthetic activity and grain yield. Salt exclusion capacity at the leaf sheath is therefore considered to be one of the main mechanisms of salt tolerance. In addition, it is suspected that the lamina joint might be involved in the salt transport from leaf sheath to leaf blade. This research aims to determine if leaf sheaths of rice exclude a large amount of $Na^+$ only or other ions such as $K^+$, $Ca^{2+}$, $Mg^{2+}$, and $Cl^-$ as well, to identify tissues in the leaf sheath, which accumulate $Na^+$, and to examine if the lamina joint is involved in the salt exclusion by the leaf sheath. The rice seedlings of salt tolerant genotype FL478 and salt sensitive genotype IR29 were independently treated with NaCl, KCl, $MgCl_2$ and $CaCl_2$, and Taichung 65 and its near-isogenic liguleless line (T65lg) were treated with NaCl. Then, the content of $Na^+$, $K^+$, $Ca^{2+}$, $Mg^{2+}$, and $Cl^-$ ions and their specific location were determined using Atomic Absorption Spectrometer, Ion Chromatograph, and Energy Dispersive X-ray Spectroscopy. Results showed that leaf sheaths of FL478 and IR29 accumulated a large amount of $Na^+$, $K^+$, $Ca^{2+}$, $Mg^{2+}$, and $Cl^-$ ons, and thus excluded them from leaf blades when treated with high concentration of each salt. When treated with NaCl, the highest $Na^+$ concentration was found in the basal part of leaf sheaths of both cultivars. Moreover, energy-dispersive X-ray spectroscopy revealed that the central parenchyma cells of the leaf sheath were the site where most Na, Cl, and K were retained under salinity in the salt tolerant genotype FL478. Also, the concentration of $Na^+$, $K^+$ and $Cl^-$ ions in leaf sheaths and leaf blades was comparable between T65 and T65lg, indicating that the lamina joint may not be involved in the exclusion of $Na^+$, $Cl^-$ and $K^+$ by the leaf sheath from the leaf blade under salinity. Therefore, we conclude that the central parenchyma cells of basal part of leaf sheath are the site that plays a physiological role to exclude $Na^+$ in the shoots of rice without the involvement of the lamina joint.

  • PDF