Park, Jin Hee;Chung, Myong Gi;Sun, Byung-Yun;Kim, Ki-Joong;Park, Jae-Hong;Park, Chong-Wook
Korean Journal of Plant Taxonomy
/
v.35
no.1
/
pp.57-80
/
2005
Morphological variation of Quercus L. subgen. Quercus in Korea was examined by numerical methods including principal components analysis of major morphological characters. Principal components analysis revealed the presence of five major species groups of the subgen. Quercus in Korea; these include 1) a group consisiting of Q. acutissima and Q. variabilis individuals, 2) Q. dentata, 3) Q. aliena, 4) Q. mongolica, and 5) Q. serrata. The putative interspecific hybrid individuals occupied intermediate position between the putative parent species in the PCA plot. The analysis also strongly suggested that size and shape of leaf blade and teeth or lobes, twig diameter, size and shape of nuts, and length and width of scales are very useful in distinguishing the species and the putative hybrids of the subgen. Quercus.
The aim of this study was to enhance the flow rate and noise performance of a centrifugal pump in dishwashers by designing an optimized impeller shape through numerical and experimental investigations. To evaluate the performance of the target centrifugal pump, experiment was conducted using a pump performance tester and noise experiment was carried out in a semi-anechoic chamber with microphones and a reflecting wall behind the dishwasher. Through the use of advanced computational fluid dynamics techniques, numerical simulations were performed to analyze the flow and aeroacoustics performance of our target centrifugal pump impeller. To achieve this, numerical simulations were carried out using the Reynolds-Average Navier-Stokes equations and Ffowcs-Willliams and Hawkings equations as governing equations. In order to ensure the validity of numerical methods, a thorough comparison of numerical results with experimental results. After having confirmed the reliability of the current numerical method of this study, the optimization of the target centrifugal pump impeller was conducted. An improvement in flow rate was confirmed numerically, and a manufactured proto-type of the optimized model was used for experimental investigation. Furthermore, it was observed that by applying the fan law, we could effectively reduce noise levels without reducing the flow rate.
Kim, Yoon-Kyeong;Kang, Sam-Seok;Cho, Kwang-Sik;Won, Kyung-Ho;Shin, Il-Sheob;Kim, Myung-Su;Ma, Kyeong-Bok;Lee, In Bog
Horticultural Science & Technology
/
v.34
no.6
/
pp.959-965
/
2016
In 1994, a new cultivar 'Joyskin' was created from a cross between the cultivars 'Whangkeumbae' and 'Waseaka' at the Pear Research Institute of the National Institute of Horticultural and Herbal Science, Rural Development Administration. In 2006, the 'Joyskin' was selected from among the 317 seedlings resulting from the cross for its skin and taste qualities. Regional adaptation tests were conducted in nine regions and in ten experimental plots from 2006 to 2011. The cultivar was named in 2011. 'Joyskin' showed a vigorous growth habit and semi-spread characteristics similar to 'Whangkeumbae'. The average full bloom date for 'Joyskin' was April 21st, which was also similar to 'Whangkeumbae'. The optimum fruit ripening time was September 6-8th, which was six or eight days earlier than 'Whangkeumbae'. The fruit was round in shape and the skin was a golden yellow color at maturity. The average fruit weight was 320 g and the flesh firmness was $2.5kg/8mm{\varphi}$. The firmness of the fruit skin determined by a blade-type plunger of texture analyzer was 22.9 N, which was significantly different from that of 'Whangkeumbae' 29.9N. Stone cell analysis of 'Joyskin' by phloroglucinol-HCl, showed that 'Joyskin' stone cells were small in size and few in numbers cpmpared to those of cultivars of was 'Manpungbae', 'Niitaka', and 'Whangkeumbae'. The patent application for 'Joyskin' was submitted in April, 2012 (Grant No. 2012-337). In 2016, 'Joyskin' (Grant No. 5895) was registered as a separate record, with uniformity and stability per Korean Seed Industry Law.
The Sudang-ri Site in Geumsan is considered the historic site where Baekje dominated the inland traffic route to Gaya through Geumsan and Jinan in the 5th Century. This study identified the production techniques of iron by conducting an analysis of metallographical microstructure of the artifacts such as an iron sword and an iron sickle that were excavated in Sudang-ri Site, Geumsan, one of the regions ruled by Baekje, and tried to figure out the characteristics and the technical systems of Baekje's ironmaking around the 5th Century by comparing them with other iron artifacts produced around the same time. The analysis showed that various production techniques were applied to the artifacts excavated in Sudang-ri Site, Geumsan. Depending on the production techniques, they can be divided largely into three methods: the simple shape-forging method, the steel manufacture method after forging, and the steel manufacture & heat-treatment method after forging. The iron sickle from the stone chamber tomb No. 1, which was produced only through forging, is mostly composed of soft ferrite at both edges of the blade and at the rear making the use of the weapon impractical. From this fact, it is presumed that they were produced as burial objects or ceremonial accessories for the person buried. The iron axe from the outer stone coffin tomb No. 1 and the iron swords and sickle from the outer stone coffin tomb No. 12, which were produced through the steel manufacture method after forging such as carburizing, did not go through the heat treatment such as quenching, but applied different production processes to each part. Therefore, it is deemed that they were produced as daily tools for cultivation rather than burial objects or ceremonial accessories. The production techniques following the forging process - carburizing and heat treatment - can be found on the iron swords from the outer stone coffin tomb No. 5 and the outer stone coffin tomb No. 12. The sturdy structure of the blade part and the durable structure of the rear processed with heat are deemed to have been produced as weaponry and used by the person buried. Based on the analysis of the iron artifacts excavated from Sudang-ri Site in Geumsan, the characteristics of iron production techniques were investigated by comparing them with the artifacts from Yongwon-ri Site in Cheonan, Bongseon-ri Site in Seocheon, and Bujang-ri Site in Seosan that were made around the same time as the cluster of Baekje tombs examined by the metallographical microstructure analysis of this study. For the iron artifacts analyzed here, the changes in the techniques were investigated using the iron swords common in all of the tombs. In the case of the iron swords, it was identified the heat treatment technique called tempering was applied from the 4th Century.
Proceedings of the Korean Society for Agricultural Machinery Conference
/
2017.04a
/
pp.83-83
/
2017
국내에 유통되는 제초날은 대부분 금속으로 제작되며, 금속 날의 대부분 탄소공구강(SK-3~5)으로 제작되고, 날 수 및 날 형태에 따라 2도 날, 3도 날, 4도 날, 8도 날, 톱날로 구분된다. 대부분 평지 제초작업에 사용되고, 고랑 제초 작업에 알맞은 제초날의 없어 고랑 제초 작업의 효율이 떨어진다. 본 연구는 굴곡이 있는 밭의 고랑 제초 작업에 효율적인 원형 제초날을 설계 하고자 한다. 밭작물의 제초작업은 굴곡이 있는 이랑과 고랑 사이의 잡초를 제거해야 하기 때문에 평지의 잡초를 제거하는 제초날로는 제초작업이 거의 불가능하다. 따라서 고랑 형상에 맞는 원형 제초날을 설계 하였으며, 회전 균형 및 무게의 균일성 설계가 쉬운 뼈대형 원형 제초날을 설계한 후 데이터를 이용하여 원형 제초날을 설계하였다. 또한 고랑의 잡초 뿌리부분을 제거하기 위해 원형 제초날에 돌출부를 추가하는 방법으로 설계하였다. 제초날은 밭작물 고랑폭을 기준으로 하여 높이는 85mm 직경은 300mm로 설계하였으며, 제초날 설계시 원형 제초날은 뼈대형 원형 제초날과 같이 고랑폭을 기준으로 하여 높이 및 직경을 뼈대형 원형 제초날과 동일한 치수로 설계하였다. 원형 제초날 설계에서 돌출부를 볼트 결착방식으로 설계하였으며, 회전중 돌출부의 파손 혹은 이탈을 방지하기 위하여 직경 5mm이상의 볼트 결착이 필요하였다. 볼트 결착방식은 제초날 조립후 제초날 회전시 고랑의 잡초를 효과적으로 제거하기 위한 작업공간 확보가 어려울 것으로 판단되었다. 따라서 제초날 원형부에 돌출부를 절단 절곡하는 방식으로 돌출부를 재설계하였으며, 돌출부 길이는 안쪽 부분 15mm, 바깥 부분 20mm로 설계하고, 돌출부 회전반경은 안쪽 날 20mm, 바깥 날 10mm로 설계하였다. 일반적인 제초날 과 달리 원형 제초날을 개발하기 위해서 회전균형과 안전이 제초날 설계에 중요한 요인이 된다. 뼈대형 제초날을 통하여 제초날의 균형 데이터를 분석하였고 이를 바탕으로 원형 제초날을 설계하였다. 또한 발란싱 머신을 이용한 회전시험에서 unbalance 정도가 3,600rpm에서 4.51/47.1deg로 나타나 제초기에 적용 가능할 것으로 판단되었다.
Recently CFRP laminate joints process by bolts and nets are developed rapidly in aircraft industries. However, there are serious drawback during jointing process. Many hole processes are needed for the manufacturing and structural applications using composite materials. Generally, very durable polycrystalline crystalline diamond (PCD) drill has been used for the CFRP hole process. However, due to the expensive price and slow process speed, chemical vapor deposition (CVD) diamond drill has been used increasingly which are relatively-low durability but easily-adjustable process speed via drill shape change and price is much lower. In this study, the comparison of hole process between PCD and CVD diamond coated drills was done. First of all, CFRP hole processbility was evaluated using the equations of hole processing conditions (feed amount per blade, feed speed). The comparison on thermal damage occurring from the CFRP specimen was also studied during drilling process. Empirical equation was made from the temperature photo profile being taken during hole process by infrared thermal camera. In addition, hole processability was compared by checking hole inside condition upon chip exhausting state for two drills. Generally, although the PCD can exhibit better hole processability, hole processing speed of CVD diamond drill exhibited faster than PCD case.
Forage productivity of Job's tears (Coix lachryma-jobi L.) and adlay (C. lachryma-jobi var. mayuen (ROMAN.) STAPF) and a hybrid corn (Kwangog) and sorghum-sudangrass hybrid (Pioneer 988) was compared in the southern part of Korea where black streaked dwarf virus' (BSDV) is prevalent. Emergence of Job's tears and adlay was more delayed compared to a corn or sorghum-sudangrass hybrid under the drought field conditions. Early growth and regrowth of Job's tears and adlay were less than those of sorghum-sudangrass hybrid. Fresh weight, dry weight, and digestible dry matter of Job's tears and adlay cut once approximately 40 days after flowering were much higher than those of two cuts at every flowering stage. Dry weight of one-cut Job's tears and ad lay harvested 40 days after flowering was similar to the total dry weight of three-cut sorghum-sudangrass hybrid but higher than that of silage corn. Digestible dry matter production was greater in the order of sorghum-sudangrass, corn, one-cut and two-cut Job's tears and adlay. Corn was severely infected with BSDV, but digestible dry matter was relatively high due to its higher in vitro dry matter digestibility. Among the Job's tears and adlay varieties, a variety of Job's tears with globular fruit shape was best for forage production due to its taller plant height, thick stem, wider leaf blades, higher leaf blade/total dry weight ratio, and higher forage yield. However, hulled grain yield of ad lay varieties was higher than that of Job's tears due to a higher hulled/rough grain ratio although they had similar rough grain yields.
Spar platforms have several advantages for deploying wind turbines in offshore for depth beyond 120 m. The merit of spar platform is large range of topside payloads, favourable motions compared to other floating structures and minimum hull/deck interface. The main objective of this paper is to present the response analysis of the slack moored spar platform supporting 5MW wind turbine with bottom keel plates in regular and random waves, studied experimentally and numerically. A 1:100 scale model of the spar with sparD, sparCD and sparSD configuration was studied in the wave basin ($30{\times}30{\times}3m$) in Ocean engineering department in IIT Madras. In present study the effect of wind loading, blade dynamics and control, and tower elasticity are not considered. This paper presents the details of the studies carried out on a 16 m diameter and 100 m long spar buoy supporting a 90 m tall 5 MW wind turbine with 3600 kN weight of Nacelle and Rotor and 3500 kN weight of tower. The weight of the ballast and the draft of the spar are adjusted in such a way to keep the centre of gravity below the centre of buoyancy. The mooring lines are divided into four groups, each of which has four lines. The studies were carried out in regular and random waves. The operational significant wave height of 2.5 m and 10 s wave period and survival significant wave height of 6 m and 18 s wave period in 300 m water depth are considered. The wind speed corresponding to the operational wave height is about 22 knots and this wind speed is considered to be operating wind speed for turbines. The heave and surge accelerations at the top of spar platform were measured and are used for calculating the response. The geometric modeling of spar was carried out using Multisurf and this was directly exported to WAMIT for subsequent hydrodynamic and mooring system analysis. The numerical results were compared with experimental results and the comparison was found to be good. Parametric study was carried out to find out the effect of shape, size and spacing of keel plate and from the results obtained from present work ,it is recommended to use circular keel plate instead of square plate.
Medial patellar luxation in dogs is one of the most common patellar problems presented to the veterinary practitioner. It is observed in toy and miniature breed and the majority of cases is a congenital form. Because of extensor mechanism's instability, it causes deformity and disorder in the growth of the affected limb when the luxation is left without treatment As lameness is not easily detectable in puppies, early diagnosis and correction are essential for therapy. Up to now, there has not been any reports refering to the diagnostic methods and the optimal age for correction in young dogs. Thirteen 45-90 days old puppies, have grade I and/or II medial patellar luxation. Only by palpation, all 13 dogs were diagnosed of patelar luxation. Skyline radiographic view was useful to interpret patellar morphology and depth of trochlear groove only above 60 days old. However, it was difficult to make definite diagnosis patellar luxation. The caudocranial and lateral radiographic view as well as ultrasonographic skyline view were not showed of patellar luxation. 2 puppies had unilateral patellar luxation and 11 puppies had bilateral patellar luxation which more serious on the left than on the right. Only 3 puppies among 11 puppies with bilateral patellar luxation were observed of lameness degree 1. Regardless of grade of patellar luxation and lameness, we performed trochlear chondroplasty using a U-shape sculpture blade to minimize cartilage injury, transposition of tibia tuberosity with No. 1 Supramid to align extensor mechanism and lateral imbrication. After surgery, we examined the operated animal daily for 10 days and on 15, 30 and 60 days after surgery respectively. After operation, pain and fever became normal on 7 days, swelling on 10 days, respectively. On 10 days after surgery, dogs showed normal standing position, and normal walking was observed in 15 days after surgery. In force plate analysis, the operated legs were normal weight bearing at 30 days after operation. After surgery, not only patellar luxation and clinical signs have been gradually reduced but also bone growth have become normal without showing growth physeal plate injury. The survival rate of puppies over 62 days old was 100%, while 42-45 days old 37.5%. The above results suggest that optimal age for surgical correction of congenital medial patellar luxation is recommended over 60 days old. In conclusion, combination of trochlear chondroplasty, transposition of tibia tuberosity, and lateral retinacular imbrication is appropriate for over 60 days old puppies to efficiently correct patellar luxation.
Jung, Yeon-Hee;Park, So-Jin;Seo, Bum-Kyoung;Lee, Kune Woo;Han, Myeong-Jin
Applied Chemistry for Engineering
/
v.17
no.6
/
pp.604-608
/
2006
Polymer composites for measuring the radioactive contamination are prepared by coating ZnS(Ag) powders as a scintillator on polysulfone base layer. The composites consist of the active layer for a scintillation reaction with radioactive wastes and the transparent support layer for transmittance of light photons emitted by scintillation in the active layer. The binding of the active layer, including ZnS(Ag), on the support layer is proceeded via coating with polysulfone as a binder, without any extra adhesive. The coating was obtained by either casting via a Doctor Blade as applicator or screen printing. The prepared composites feature a monolithic structure, resulting in the complete adhesion between two layers. The composite prepared by the casting technique using an applicator holds a good detection efficiency in measuring the alpha radionuclide, but its structure becomes fragile because of warping in morphology. On the contrary, the composite prepared by the screen printing shows a good detection capacity as well as a good stability in a mechanical shape.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.