• 항공우주시스템공학회지
• /
• 제8권1호
• /
• pp.12-17
• /
• 2014

In this paper, optimal design of composite rotor blade cross-section to consider manufacturability was performed. Skin thickness, torsion box thickness and skin lay-up angle were adopted as discrete design variables and The position and width of a torsion box were considered as continuous variables. An object function of optimal design is to minimize the mass of a rotor blade, and various constraints such as failure index, center mass, shear center, natural frequency and blade minimum mass per unit length were adopted. Finally, design variables such as the thickness and lay-up angles of a skin, and the thickness, position and width of a torsion box were determined by using an in-house program developed for the optimal design of rotor blade cross-section.

• 생명과학회지
• /
• 제26권4호
• /
• pp.484-489
• /
• 2016

많은 생물체들은 다른 생물체들의 성장, 생존, 재생에 영향을 미치는 allelochemical 물질들을 생성함으로서 자신들의 영역을 유지 확장할 수 있다. 천연 생물촉진활성을 가진 allelochemicals을 찿기 위하여 18종의 흔한 해조류를 대상으로 실험실에서 편리하게 배양가능한 둥근돌김의 중성포자들로부터 가근 및 유엽의 형성 촉진효과를 탐색하였다. 그중 가장 활성이 높은 녹조류 청각의 추출물은 약 100 및 50 μg/ml 농도에서 최대 및 반 정도의 중성포자로부터 가근 형성 촉진효과를 나타내었다. 또한 청각 추출물은 중성포자 배양 초기에 가근형성, 가근갯수, 가근길이, 유엽형성, 유엽길이 등의 성장을 촉진시켰다. 이 같은 다른 해조류의 성장을 촉진시키는 allelochemicals 들은 천연 해조류 촉진제의 개발 및 유용 해조류 종들의 유지관리 등에도 활용될 가능성을 지닌다.

• 수산해양교육연구
• /
• 제26권1호
• /
• pp.34-48
• /
• 2014

Marine algal assemblages on the artificial reefs at three stations (Haengwon, Geumneung, Pyoseon in Jeju-do) and the growth pattern of Ecklonia cava with water depth were studied before and after rocky cleaning. Nine algal species occurred at three artificial reefs before rocky cleaning in July 2012, however, 19 algal species were found at three artificial reefs after rocky cleaning in July 2013. In particular, 13 of 19 species in 2013 were replaced by different species which were not found in July 2012. Algal biomass rapidly increased in July 2013 after rocky cleaning. The nMDS plot based on the presence and absence data of macro-algal assemblages on the artificial reefs showed that the species compositions between artificial reefs were similar to each other before rocky cleaning operations in July of 2012. However, after rocky cleaning, the species composition of macro-algal assemblages in Haengwon region was similar to that in Pyoseon region while that in Geumneung region was different to those in Haengwon and Pyseon regions in July 2013. It is needed to clarify the suitable water depth for transplantation of perennial Phaeophyta E. cava. According to the data on seasonal changes in total length, total weight, blade length, blade width, blade weight of E. cava, it began to grow rapidly from April and reached to the maximum value in June, and then degeneration of the blade occurred in July and continued to early August. Although the total length of E. cava at 10m water depth was larger than those at 5 m and 15 m water depths, there was no significant difference statistically among water depths by ANOVA test. However, in the values of total weight, blade length, blade width, and blade weight, the growth patterns at 5 m water depth were larger than those at 10 m and 15 m. Thus, it is assumed that the most suitable water depth for transplantation and its maximum growth and effective release of zoospores of E. cava will be 7~10 m water depth.

• 설비공학논문집
• /
• 제25권7호
• /
• pp.377-385
• /
• 2013

In this study, the performance of an impeller according to blade length and pitch angle was studied experimentally by building a variable pitch impeller while changing blade length to review the effect of blade length and pitch angle on a fan's performance. The pitch angle was changed in six steps from $20^{\circ}{\sim}45^{\circ}$ at intervals of $5^{\circ}$ while the blade lengths were changed to 90 mm, 100 mm, 110 mm and 120 mm with an identical airfoil shape while carrying out the experiment. The results are summarized as follows : The air flow per static pressure of axial fans increased linearly with increase of pitch angle, but the high static pressure showed a decrease at a pitch angle of $35^{\circ}$. The shaft power increased proportionally to the pitch angle at all blade lengths; the larger the pitch angle, the larger the measured increase of shaft power. This is because the drag at the fan's front increases with the pitch angle. In the axial fans considered in this research, the flow and incre.

• 한국분무공학회지
• /
• 제28권1호
• /
• pp.16-23
• /
• 2023

The objective of this numerical study is to investigate the effect of the shape and material of the blower blade for the electrified speed sprayer on the blowing performance. The shape of the blade was changed to the bonding angle, the number of blades, the width of the blade, and the blade length based on the existing model. In order to obtain the reliability of the numerical model, the analysis of the grid dependence was performed in the numerical analysis. The numerical analysis results were compared and analyzed in terms of the agricultural chemical penetration length characteristics, flow uniformity characteristics, and velocity distribution characteristics. Furthermore, the effect of material change on weight reduction and structural characteristics was also compared and analyzed. As a result of the analysis, it was found that the optimal condition was that the blade angle was 45°, the number of blades was 12, and the width was 115 mm, which was confirmed through a comparison of the inlet mass flow rate. As a result of the equivalent stress lower than the yield strength due to the material change from aluminum to steel compared to the existing steel, structural defects do not appear, and it is judged that the operation time compared to the battery capacity will be improved through the weight reduction of the blade.

• 한국유체기계학회 논문집
• /
• 제19권6호
• /
• pp.14-18
• /
• 2016

Multi-MW wind turbines have very large blades over 40~50 m in length. Some factors like wind shear and tower shadow make an effect on asymmetric loads on the blades. Larger asymmetric loads are produced as the length of blade is getting longer. In this paper, a 2 MW on-shore wind turbine is considered and variations of thrust on 3 blades and rotor hub under wind shear are calculated by using a commercial Bladed S/W and dynamic properties of the thrust variations are investigated. It is shown that the amplitude of the asymmetric thrust on each blade under wind shear is getting larger as the wind speed increases, the frequency of the thrust variation on each blade is same as the one of rotor speed, and the frequency of the thrust variation at rotor hub is 3 times as high as the one of rotor speed.

• 한국추진공학회지
• /
• 제9권1호
• /
• pp.46-52
• /
• 2005

무인표적기의 성능 향상을 위해 추진시스템인 프로펠러를 재설계하였다. Vortex 이론을 이용한 설계 및 해석 프로그램을 사용하였으며, 설계 변수는 반경 방향에 따른 코드 길이, 블레이드의 반경 변화, 그리고 비틀림각 등이다. 저속과 고속일 때 모두 향상된 추력을 내도록 엔진 회전수 변경을 포함하여 프로펠러를 재설계 하였다.

• ALGAE
• /
• 제18권4호
• /
• pp.295-299
• /
• 2003

The population dynamics of Ecklonia stolonifera was investigated at Tongyeong coastal area in the South Sea of Korea. The blade length and width, stipe length and diameter, mean total length and mean weight were measured from randomly collected fifty individuals in every month. The plants in Tongyeong population were relatively bigger than those of Busan Korea and Aomori Japan in terms of their blade length and width. The population biomass was low in winter and high in spring and summer. The sporangial sori were found from August to December but prominent in September and October. About 90 % of the Tongyeong population was consisted of one- and two-year old plants and the zoosporangial sori were observed mostly in two-year old plants. It was different from the results of Busan and Aomori population in which the zoosporangial sori were observed from the plants older than three years. The new populations were developed from the zoospores of two-year old plants and their generation time was relatively shorter than those of Busan and Aomori.

• 풍력에너지저널
• /
• 제14권4호
• /
• pp.68-74
• /
• 2023

Research is being actively conducted to increase energy production by increasing the length of wind turbine blades. However, it is difficult to manufacture and transport large-scale blades. Various studies are being conducted on the concept of separate wind turbine blades considering transportation methods and maintenance. In this study, various methods of dividing blades and assembling the divided blades were reviewed. The position of the division when the blades are divided was analyzed.

• Journal of Korean Neurosurgical Society
• /
• 제56권5호
• /
• pp.400-404
• /
• 2014

Objective : Clip artifacts limit the visualization of intracranial structures in CT scans from patients after aneurysmal clipping with cobalt alloy clips. This study is to analyze the parameters influencing the degree of clip artifacts. Methods : Postoperative CT scans of 60 patients with straight cobalt alloy-clipped aneurysms were analyzed for the maximal diameter of white artifacts and the angle and number of streak artifacts in axial images, and the maximal diameter of artifacts in three-dimensional (3-D) volume-rendered images. The correlation coefficient (CC) was determined between each clip artifact type and the clip blade length and clip orientation to the CT scan (angle a, lateral clip inclination in axial images; angle b, clip gradient to scan plane in lateral scout images). Results : Angle b correlated negatively with white artifacts (r=-0.589, p<0.001) and positively with the angle (r=0.636, p<0.001) and number (r=0.505, p<0.001) of streak artifacts. Artifacts in 3-D images correlated with clip blade length (r=0.454, p=0.004). Multiple linear regression analysis revealed that angle b was the major parameter influencing white artifacts and the angle and number of streak artifacts in axial images (p<0.001), whereas clip blade length was a major factor in 3-D images (p=0.034). Conclusion : Use of a clip orientation perpendicular to the scan gantry angle decreased the amount of white artifacts and allowed better visualization of the clip site.