• 한국약용작물학회지
• /
• 제16권1호
• /
• pp.33-38
• /
• 2008

인삼에 발생하는 병해충을 적기에 방제하여 농약살포횟수를 줄이고 인삼을 친환경적으로 재배할 수 있는 기초자료를 얻기위하여 2006년도에 전북지방의 인삼포장에 발생하는 병해충 및 포장에 비래하는 해충을 조사한 결과는 다음과 같다. 전북지역에서 발생하는 병의 종류는 진안은 Rhizoctonia solani 등 8종, 정읍은 Botrytis cinerea 등 7종, 고창은 Botrytis cinerea 등 6종이었다. 발생시기는 7월을 전후한 장마기에 가장 많이 발생하여 장마 이전에 철저한 병해방제가 요구되었다. 또한 전북지역에서 가장 문제시되는 병은 Alternaria alternata, Botrytis cinerea, Colletotrichum gloeosporioides 등이었다. 인삼 포장을 가해하는 해충을 조사한 결과, Asusta despecta sieboldiana와 Holotrichia sp.이었고 블랙라이트트랩을 이용한 결과에 있어서는 Maladera orientalis, Ostrinia furnacalis, Holotrichia morosa 등이 가장 많이 포획되었다.

• Journal of Biosystems Engineering
• /
• 제3권1호
• /
• pp.64-76
• /
• 1978

A dimensional supply of petroleum fuels and increased competition for petroleum products has made the conservation of energy in grain drying an important cost and management factor. Research on solar grain drying is directed toward utilization of a renewable energy source as an alternative to petroleum fuels for drying. There are many technical and economic problems in accepting and adopting solor energy as a new energy source for grain drying. The purpose of this study are to assess the state of the art of solar grain drying and to find out the problems by reviewing literatures available. The results obtained may be summarized as follows; 1.It may be considered that the weather conditions in October of Korea was satisfactory for the forced natural air and solar heated air drying. 2. Solar energy is considered more applicable to low-temperature, In-storage drying systems than to high-temperature, high-speed drying systems. In-storage drying systems require low levels of heat input. The costs of collector systems to provide low temperature are considerably cheaper than for high-temperature systems. 3. Tubular type collector made of polyvinyle film seems to be the most practical at this stage of development and black-painted bare-plate collectors mounted on the outside of a typical, round, low-temperature drying bin can supply an appreciable amount of the energy efficiently needed for low-temperature grain drying at a lower cost. 4. All of the grains in solar drying tests was successfully dried up to safe storaged moisture levels without significant spoilage. Drying rates with solar system were faster than natural air drying systems, and usually a little slower than similar low-temperature electric drying systems. 5. Final grain moisture levels were lower in solar tests than in natural air tests, and generally higher than in tests with continuous heated air. 6. Savings of energy by use of solar collectors ranged from 23% to 55%, compared to the natural and electric ileated air drying systems. However, total drying cost effectiteness tvas not significant. Therefore, it is desirable that solar grain dry-ing sIFstems tvhich could be suitable for multiple heating purposes on farms shouldbe developed. 7. Supplemental heat with solar radiation did little to reduce air flow requirementsbut refuced drying time and increased the p\ulcornerobability of successful drying duringdrying poriod.

• 한국자원식물학회지
• /
• 제8권2호
• /
• pp.183-188
• /
• 1995

땅두릅 여룹철 연화재배(軟化栽培) 가능성(可能性)을 검토(檢討)하기 위하여 흑색(黑色) PE와 은색(銀色) 단섬유불직포(短纖維不織布)를 이용하여 5월 정식(定植)을 포함하여 6월, 7월, 8월 정식기(定植期)에 대하여 시험(試驗)한 결과(結果)는 다음과 같다. 1. 수확소요일수(收穫所要日數)는 5월 정식(定植)에서 20일(日)이고 7월, 8월 정식(定植)에서는 15일로 단축(短縮)되었으나 생육기간중(生育期間中)의 적산온도(積算溫度)는 $400^{\circ}C$ 범위이었다. 2. 7월 정식(定植)에서 땅두릅 연화수(軟化莖)의 수량(收量)은 고온(高溫)으로 인한 연부현상(軟腐現狀)으로 낮은 경향(傾向)이었다. 3. 각(各) 부위별(部位別) 경도(硬度)는 상위부(上位部)가 연(軟)하고 하위부(下位部)가 단단한 경향(傾向)이고, 저온저장(低溫貯藏) 7일후(日後)에도 신선도(新鮮度)는 유지(維持) 되었다. 4. 5월, 6월 정식재배시(定植栽培時) 18,000천원/ha 이상(以上)의 소득(所得)을 얻을 수 있었다.

• 복식
• /
• 제50권3호
• /
• pp.31-42
• /
• 2000

This study investigated the history of whakwan (crown, 화관(花冠)) and classified the types of whakwan accordint to its structure. Whakwan seemed to originate from the custome of sticking flowers in the hair which was the reflection of human desire of pursuing the beauty . The whakwan fist appeared in the Oriental painting during the Tang period and became fashionable is Song. It is not clear when whakwan was introduced into Korea, but is assumed to be greatly influenced by the Song whakwan. The Korean record on whakwan showed on whakwan showed fro the fist time in the reign of Kimg Sejong and whakwan was used for the costume of a dancing boy. Through the present type of whakwan appeared only one in the painting of the reign of King Seonjo, there are a number of whakwans in the lattern part of the Chosun dynasty, Now there exist three types of whakwan in Korea. The first type is similar to that of Chokduri in decoration . But it was made of paper, had the double structures of inner and outer part and was decorated by Yangkwan's vertical lines of gilt paper. The second type is the whakwan made of artifical flowers with various color cords and was widely used in Geesung and Pyungyang regions. Finally, though the third type is similar to Sabangkwan, its outside was decorated gaudilly iby Dangchae (colorful painting ) and it was assumed that dancing bodys put it on their head for various banquets. Out of these three types, the first is most representative , Black was the popularly used color for the first type and this type was used either for brides on wedding ceremonies or for shamans or palace dancers. The second type was widely used in Gaesung and Pyungyang regions. But the differences in the shape of whakwan of the two regions showed the regional characteristics of traditional costumes in Korea. The third type was most likely to be used in the dance for palace banquets, but it is necessary to further investigate whether shamans actually wore this type of whakwan.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2003년도 추계학술대회
• /
• pp.1892-1897
• /
• 2003

A new thermal inkjet printer head on SOI wafer with virtual valve was proposed. It was composed of two rectangular heaters with same size. So we could call it T-jet(Twin jet). T-jet has a lot of merits. It has the advantage of being fabricated with one wafer and is easy to change the size of chamber, nozzle, restrictor and so on. However, above all, It is the best point that T-jet has a virtual valve. And it was manufactured on SOI wafer. The chamber was formed in its upper silicon whose thickness was 40um. The chamber's bottom layer was silicon dioxide of SOI wafer and two heaters were located underneath the chamber's ceiling. And the restirctor was made beside the chamber. Nozzle was molded by process of Ni plating. Ni was 30um thick. Nozzle ejection test was performed by printer head having 56 nozzles in 2 columns with 600NPI(nozzle per inch) and black ink. It measured a drop velocity of 12m/s, a drop volume of 30pl, and a maximum firing frequency of 12KHz for single nozzle ejection. Throwing out the ink drop in whole nozzles at the same time, it was observed that the uniformity of the drop velocity and volume was less than 4%.

• 정보과학회 논문지
• /
• 제42권11호
• /
• pp.1430-1440
• /
• 2015

배터리 기반 무선 센서 네트워크(Wireless Sensor Networks, WSN)는 고정된 자원으로 인해 제한된 수명을 갖지만, 태양 에너지 기반 WSN은 에너지가 주기적으로 계속 공급되어, 하드웨어적인 문제가 없는 한 영원히 동작할 수 있다. 한편, 모바일 싱크를 활용한 기법은 데이터 전송 경로를 단축하여 센서의 에너지 소모량을 감소시킬 수 있지만, 비효율적인 싱크의 이동은 에너지 낭비를 초래할 수 있다. 이에 따라 모바일 싱크와 클러스터링을 혼합한 기법들이 제안되고 있지만, 클러스터링은 에너지 불균형 문제로 인한 네트워크 수명 단축을 야기한다. 따라서 본 연구에서는 태양 에너지 기반 WSN에서 모바일 싱크를 효과적으로 지원하기 위한 CE-DSS를 제안한다. CE-DSS는 에너지를 효율적으로 활용해 각 노드의 정전시간을 최소화하면서, 각 클러스터의 데이터를 공유한다. 이로 인해 네트워크 신뢰도가 향상되고, 모바일 싱크의 이동 거리가 단축되어 싱크의 에너지 사용량이 감소된다.

• 청정기술
• /
• 제30권3호
• /
• pp.239-247
• /
• 2024

The removal of volatile organic compounds (VOCs) from spent polypropylene (PP) sourced from the bumpers and interiors of used cars was carried out by using high-temperature supercritical carbon dioxide (scCO₂) extraction. The recycled polymers from the bumpers and interiors contained other additives beside PP such as polyethylene (PE), talc, and carbon black, which modified the properties of PP. The crystallinity of the recycled bumper and interior PP was significantly lower than that of the virgin PP pellet. The decomposition temperatures of the recycled bumper and interior PP was slightly higher than that of the virgin PP pellet, while the melting and crystallization points were slightly lower. The effect of process conditions on VOC removal was studied by varying the time (2 ~ 720 min), pressure (6.4 ~ 14 MPa), and temperature (298 ~ 473 K). Since VOC removal at 2 min produced satisfying results, times below 2 min (10 ~ 120 s) were also studied. The main goal of scCO₂ extraction was to reduce the xylene content, as the xylene content of the recycled bumpers was higher than the allowable limit. A temperature above 373 K was needed to remove the xylene from the waste PP samples. The optimum condition for VOC removal from bumper waste was determined to be 433 K, 8 MPa, and 60 s. The car interior waste had VOC content within the allowable limit, so no further treatment was needed.

• 복식문화연구
• /
• 제16권6호
• /
• pp.1050-1063
• /
• 2008

A movie is a fiction made on a basis of an author's and a writer's imagination, but all sorts of properties mixed with each other and most realistically expresses the era which becomes the background of a movie and acts as a carrier that connects designers with consumers. Thus, this study was carried out to review how the fashion products that designer's intention and commercial value added are expressed in collections by comparing and analysing the costumes in the movie "The Great Gatsby" that described the life of America's upper-class in 1920s and the 04 S/S Y&Kei collection which were proceeding after getting inspiration from this movie. For this, literature materials were inspected in order to make a theoretical review on social and cultural background and costumes history background in 1920s and the photo materials on movie costume were collected and analysed using DVD video captures, as well as the photo materials on 04 S/S Y&Kei were collected and analyzed through the institute providing domestic fashion information. The following conclusion was deduced through this study. First, in 1920s which becomes the background of this study, the slim shape of Flapper which looks like a young and boy became an ideal figure condition and the straight silhouette with low waist line and the short skirt that rose to knee was popular. Second, as a result of analysing movie costume by classifying it in silhouette, colors, and materials, straight silhouette of low waistline with a near colored - tone seen in the pastel series, including white, beige, pink, and gray was mainly constituted and the metal colors like silver and gold were used. As a material, chiffon, satin, velvet, flower patterned prints, and beads were used, which represented luxurious life of women in the upper classes. Third, as a result of comparing and analysing, it turned out that there was a similarity. However, in dress collection for a heroine, some dissimilarity differentiated from a movie costumes was found out in that the dresses in collection expressed moderate beauty and modernism and elegant beauty at the same time by matching a variety of materials and using black color.

• 산경연구논집
• /
• 제1권1호
• /
• pp.5-12
• /
• 2010

The retail business of drugstore was introduced to Korea for the first time 10 years ago. Since Olive Young introduced a retail store in the name of drugstore in 1999 for the first time in Korea, new distribution channel combining drugstore, cosmetic products and dairy products, etc has been made. At initial stage, the new distribution channel grew up slowly because of low specialty and economic stagnation. However, the three big distribution channels, that is to say, Olive Young (CJ), Watsons (GS) and W Store (Kolon Well Care), etc, were established to produce new distribution system following large-scaled discount stores as well as convenience stores. The purpose of the study is to investigate ways making Korean style drugstore be new retail business in addition to traditional markets, department stores, E-Mart and other general super markets and to examine problems preventing the drugstore from being promoted and to find out solutions. The speciality retailers that is called a category killer attacking department stores as well as marts is expanding market quickly. New consumption trend that gives priority to wellbeing is being expanded in accordance with high level of standards of living life: The drugstore is thought to be new alternative of distribution because it keeps special products. Young ladies who are main customers of drugstores respond to the trend sensitively to have more buying power that is thought to be promising. And, consumers' desire has become concrete and special. This is because consumers want not only convenient shopping but also special shopping system that is current trend. These days, so called Multi-shop and Total shop and other special shops have been recently opened. Special multi-shop has been concentrated on fashion product and miscellaneous goods so far: Health total wellbeing shop shall be popular in accordance with wellbeing trends. Drugstores can play an important role. Drugstores were opened for the first time ten years ago. In particular, Olive Young succeeded in going into the black after making efforts for a long time by many persons. Drugstores could succeed in the business owing to many persons in the past as well as customers who liked drugstores. However, drugstores once lost ways and recorded poor business results. The three drugstores, that is to say, Olive Young, Watsons making efforts to go into the black and W-Store pursuing traditional drugstore shall compete each other and make effort to satisfy customers' desire. In that way, the three drugstores can be assured of present business as well as future business. The consumers' demand trend has become special at sub-division so that drugstores that can satisfy the demand can succeed in the business. Large businesses may be more interested in the 4th generation retail business to produce good income and to have bright future. Drugstore business and market are likely to expand and develop owing to large business' participation in drugstore business. Drugstores expanded shop at Seoul and Gyeonggi-do until middle of 2000. Drugstore business at station sphere in Seoul and Gyeonggi-do that have high ratio of temporary population has low customer loyalty to have limitation on continuous growth. Since 2009, drugstores have opened new shops at local towns: From the year of 2010, drugstores need to establish multiple shop strategy by accelerating business speed and to allow customers to drop in the shop anywhere in the nation and to enter consumers' life deeply, so that they can strengthen business base definitely. Drugstores need to have price competitiveness to have multiple shop opening strategy and to satisfy consumers and to supply high quality services that is future subject to solve. And, Olive Young and Watsons that are Korean style drugstore need to keep system in order and to strengthen substance as Korean style drugstore and to expand marketing, so that they can get business outcome within 5 years that was done 10 years before and they become the 4th generation retail business. The study had difficulties at collecting material from the three drugstore because of poor cooperation. And, the author had great difficulty at collecting statistical material that was made in disorder. Further effort is needed considering such problems.

• 한국작물학회지
• /
• 제56권3호
• /
• pp.205-211
• /
• 2011

가정용 소량의 볶음용 참깨 최적 볶음온도 및 시간은 팽창율, 색도, 착유량, 관능평가 등을 고려해 보았을 때 $220^{\circ}C$ 에 3분간 처리가 적당하였고, 참기름용 최적 볶음온도 및 시간은 $220^{\circ}C$에 5분간 처리가 가장 적당한 것으로 나타났다. 볶음처리 조건시험에서는 변온처리 효과는 고정온도 처리보다는 적은 것으로 나타났으며, 고정온도 처리가 볶음참깨 및 참기름 가공에 적합한 것으로 사료되었다. 가공용 대용량의 볶음참깨 볶음온도는 흰깨, 검은깨 모두 $240^{\circ}C$에 15분간 처리가 총평에서 가장 높은 평점을 받아 대용량으로 참깨를 볶아서 가공할 때는 소량으로 볶았을 때 보다 $20^{\circ}C$정도 더 높은 온도처리가 적절한 것으로 사료되었다. 대용량의 참기름 가공용으로 사용하기 위한 대용량 참깨 복음온도는 흰깨는 $280^{\circ}C$에 10분간 처리가, 검정깨는 $260^{\circ}C$에 15분간 처리가 총평에서 가장 높은 평점을 얻었고, 검정깨 보다는 흰깨는 더 높은 온도로 처리되어야 함을 알 수 있었다.