• 제목/요약/키워드: Black voltage

검색결과 105건 처리시간 0.027초

자외선/적외선 불꽃감지기 소개 및 오동작 방지를 위한 연구 (Introduction of Ultraviolet/Infrared Flame Detector and Method for False Detection Prevention)

  • 임병현;고낙용;황종선;김영민;김종만
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 춘계학술대회 논문집 기술교육전문연구회
    • /
    • pp.8-11
    • /
    • 2003
  • We propose that when combustible burn with contain carbon, introduce fire detector with sensor of private-use detectable light energy as infrared and ultraviolet in energy of electromagnetic-wave type radiate from flame, method for correct discrimination to resemble fire produce false alarm of detector such as sun light, hot object radiation, are welding. This research using infrared sensor is pyroelectric infrared sensor based black body radiation theory. Ultraviolet sensor is uv Tron using gas multiplication effect to current discharge and photoelectric effect of metal. To have high sensibility and to gain proper output voltage, it has high responsive performance. This research introduced UV/IR compound type flame detector and proposed method of false alarm reduced to resemble fire. The result propres the prevention and extinction of fire technique degree, certificated operation of detector.

  • PDF

TN 모드와 FFS 모드에서 Pretilt Angle이 전기 광학 특성 및 동력학 안정성에 미치는 영향에 관한 연구 (Study on Electro-optic Characteristics and Dynamic Stability Depending on the Pretilt Angle for the Twisted Nematic(TN) and Fringe-field Switching(FFS) Mode)

  • 김미숙;정연학;김향율;김서윤;이승희
    • 한국전기전자재료학회논문지
    • /
    • 제17권11호
    • /
    • pp.1234-1240
    • /
    • 2004
  • We studied on the electro-optic characteristics and dynamic stability according to an undesirably defined pretilt angle induced in high step coverage of pixel area for the Twisted Nematic (TN) / Fringe-Field Switching (FFS) mode. In case of the TN mode, LC directors twist reversely near the edges of thin-film-transistor and black matrix where the pretilt angle of the LC is not well defined. Therefore, the voltage-dependent dynamics of the LC in TN mode is unstable and shows the bad electro-optic characteristics. On the other hand, in case of the FFS mode, the LCs are twisted parallel to the bottom substrate by fringe electric field and the electro-optic characteristic is not influenced by the pretilt angle of the LC which is not well defined.

리튬이온전지 음극의 고속 성능 향상을 위한 도전재 복합화 (Composited Conductive Materials for Enhancing the Ultrafast Performance for Anode in Lithium-Ion Battery)

  • 성기욱;안효진
    • 한국재료학회지
    • /
    • 제32권11호
    • /
    • pp.474-480
    • /
    • 2022
  • Lithium-ion batteries (LIBs) are powerful energy storage devices with several advantages, including high energy density, large voltage window, high cycling stability, and eco-friendliness. However, demand for ultrafast charge/discharge performance is increasing, and many improvements are needed in the electrode which contains the carbon-based active material. Among LIB electrode components, the conductive additive plays an important role, connecting the active materials and enhancing charge transfer within the electrode. This impacts electrical and ionic conductivity, electrical resistance, and the density of the electrode. Therefore, to increase ultrafast cycling performance by enhancing the electrical conductivity and density of the electrode, we complexed Ketjen black and graphene and applied conductive agents. This electrode, with the composite conductive additives, exhibited high electrical conductivity (12.11 S/cm), excellent high-rate performance (28.6 mAh/g at current density of 3,000 mA/g), and great long-term cycling stability at high current density (88.7 % after 500 cycles at current density of 3,000 mA/g). This excellent high-rate performance with cycling stability is attributed to the increased electrical conductivity, due to the increased amount of graphene, which has high intrinsic electrical conductivity, and the high density of the electrode.

PCITS에 의해 소손된 강이음쇠형 CSST의 특성 해석에 관한 연구 (A Study on the Properties Analysis of an Iron Fittings Type CSST Damaged by the PCITS)

  • 이장우;최충석
    • 한국화재소방학회논문지
    • /
    • 제30권4호
    • /
    • pp.121-127
    • /
    • 2016
  • 본 논문에서는 대전류공급장치(PCITS)에 의해 소손된 강이음쇠형(iron fittings type) 금속플렉시블호스(CSST)의 구조 및 전기적 특성을 해석하였다. CSST는 보호 피막, 튜브, 너트, 클램프 링, 플레어 캡, 소켓, 볼 밸브 등으로 구성되어 있다. CSST의 내전압 평가는 전기 충전부와 비충전부 사이에 교류 전압 220 V를 1분간 인가하여 견뎌야 한다. 직류 500 V에 의한 절연 성능의 평가는 온도 상승 시험 전에 $1M{\Omega}$ 이상, 시험이 끝난 후에는 $0.3M{\Omega}$ 이상을 요구한다. 정상 제품의 평균 저항은 $11.5m{\Omega}$이었으나 PCITS로 130 A를 흘려 소손된 제품의 평균 저항 $11.50m{\Omega}$이었다. 또한 130 A가 약 10 s 흘렀을 때 튜브의 보호 피막이 일부 용융되었고, 검정색의 연기가 발생하였다. 60 s 경과되면 튜브의 대부분이 적색으로 발열되며, 전류가 120 s 흘렀을 때는 적열 범위가 넓어졌다. 95%의 신뢰 구간(CI)의 검증에서 P 값은 0.019로 정규 분포를 갖지 못하였으나 Anderson-Darling (AD) 통계량은 0.896, 표준 편차는 0.5573 등으로 양호한 특성을 나타냈다.

CCD 영상센서를 위한 CMOS 아날로그 프론트 엔드 (CMOS Analog-Front End for CCD Image Sensors)

  • 김대정;남정권
    • 전기전자학회논문지
    • /
    • 제13권1호
    • /
    • pp.41-48
    • /
    • 2009
  • 본 논문은 고성능 이미지 센서인 CCD 시스템에서 전체 시스템의 성능을 좌우하는 아날로그 프론트 엔드(analog-front end, AFE)를 영상신호처리 유닛과 함께 SoC로써 구현한 설계에 관한 것이다. 데이터의 전송속도가 빨라짐에 따라 데이터 샘플링의 불확실성을 낮추었으며, $0{\sim}36\;dB$의 높은 이득을 가지는 지수함수적인 가변 이득단의 대역폭을 구현하기 위한 구조 및 증폭기의 정밀도를 높이기 위한 기생 커패시턴스에 둔감한 커패시터 배열을 개발하였다. 또한, 블랙-레벨 상쇄를 위한 아날로그 및 디지털 영역에서의 이중 블랙 레벨 상쇄를 효과적으로 구현하였다. 제안된 구조를 $0.35-{\mu}m$ CMOS 공정으로 구현하였으며, 10-bit 해상도의 전체 CCD 카메라 시스템에 적용하여 그 동작을 검증하였다. 제안한 AFE는 3.3 V 공급전압 및 15 MHz의 데이터 전송속도에서 80 mA를 소모하였다.

  • PDF

Effects of various cone-beam computed tomography settings on the detection of recurrent caries under restorations in extracted primary teeth

  • Kamburoglu, Kivanc;Sonmez, Gul;Berktas, Zeynep Serap;Kurt, Hakan;Ozen, Dogukan
    • Imaging Science in Dentistry
    • /
    • 제47권2호
    • /
    • pp.109-115
    • /
    • 2017
  • Purpose: The aim of this study was to assess the ex vivo diagnostic ability of 9 different cone-beam computed tomography (CBCT) settings in the detection of recurrent caries under amalgam restorations in primary teeth. Materials and Methods: Fifty-two primary teeth were used. Twenty-six teeth had dentine caries and 26 teeth did not have dentine caries. Black class II cavities were prepared and restored with amalgam. In the 26 carious teeth, recurrent caries were left under restorations. The other 26 intact teeth that did not have caries served as controls. Teeth were imaged using a $100{\times}90-mm$ field of view and a 0.2-mm voxel size with 9 different CBCT settings. Four observers assessed the images using a 5-point scale. Kappa values were calculated to assess observer agreement. CBCT settings were compared with the gold standard using a receiver operating characteristic analysis. The area under the curve (AUC) values for each setting were compared using the chi-square test, with a significance level of ${\alpha}=.05$. Results: Intraobserver kappa values ranged from 0.366 to 0.664 for observer 1, from 0.311 to 0.447 for observer 2, from 0.597 to 1.000 for observer 3, and from 0.869 to 1 for observer 4. Furthermore, interobserver kappa values among the observers ranged from 0.133 to 0.814 for the first reading and from 0.197 to 0.805 for the second reading. The highest AUC values were found for setting 5 (0.5916) and setting 3 (0.5886), and were not found to be statistically significant(P>.05). Conclusion: Variations in tube voltage and tube current did not affect the detection of recurrent caries under amalgam restorations in primary teeth.

리튬 전지용 $MnO_2$ Cathode의 제조 및 전기화학적 특성 (The Preparation and Electrochemical Properties of $MnO_2$ Cathode for Lithium Rechargeable Battery)

  • 유영한;김영재;박준기;서부완;정인성;김주승;박복기;구할본;문성인
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1996년도 하계학술대회 논문집 C
    • /
    • pp.1682-1684
    • /
    • 1996
  • Recently, because diffusion of cordless machine and smart card and so on, and concern of unpolluted materials, one are concerned with Li secondary batteries. Li secondary batteries have high voltage, high energy density and high power density, and heavy metal pollution problems are little. Mn is low price and is distributed much quantity. Therefore, we investigated $MnO_2$. In this study, we worked the electrochemical properties and charge/discharge characteristics of $MnO_2/Li$ cells. In results, the more heating temperature is high, the more ${\gamma}-phase$ varied ${\beta}-phase$, and when $MnO_2$ is heated at $320^{\circ}C$ and super-s-black 20wt% is mixed, characteristics are the best.

  • PDF

대전입자형 디스플레이의 균등전계내 대전입자의 거동특성에 관한 연구 (A study on a moving characteristics of charged particle in uniform electric field of Charged Particle type Display)

  • 이동진;김영조
    • 한국산학기술학회논문지
    • /
    • 제10권6호
    • /
    • pp.1186-1190
    • /
    • 2009
  • 본 논문에서는 균일한 전계내의 대전입자의 운동특성에 대하여 연구하였다. 패널을 제작하기 위하여 양전하를 띠는 검은색 대전입자(토너)와 음전하를 띠는 노란색 대전입자(토너)를 사용하였으며, 패널구동을 위하여 오버슈트 현상이 없는 power supply로 구형펄스를 인가하였다. 또한 RT-200을 이용하여 광학특성(대조비, 시야각)을 측정하였으며, 레이저와 포토다이오드를 사용하여 응답속도를 측정하였다. 그리고 응답속도와 대조비를 통하여 대전입자의 m/q 분포를 확인하였다. 그 결과, 대전입자의 구동전압, 대조비, 응답속도는 m/g에 의해 결정되며, 패널내부에 주입된 대전입자의 m/q 분포가 동일할수록 구동특성이 향상되었다.

광색가변 및 색온도 제어용 100[W]급 투광기 개발 (Development of 100[W] LED Flood Lighting with Tunable Colors and Color Temperatures)

  • 윤진식;김기훈;송상빈;임영철
    • 조명전기설비학회논문지
    • /
    • 제22권12호
    • /
    • pp.1-9
    • /
    • 2008
  • 이 논문에서는 100[W]급 Discrete LED 투광기 조명 제품 개발에 관한 것으로, 3[W] RGBA LED를 이용하여 광색 및 색온도 제어가 가능하도록 광학/방열/회로/시스템 설계를 통한 시제품을 제작하였다. 그 결과, 색온도 $2,000{\sim}10,000[K]$ 범위에서 흑체궤적에 정확히 일치하면서 연색지수가 $71{\sim}91$까지 고연색성을 실현하였으며, 동작전압 $90{\sim}250[Vac]$, 효율 87[%], 역률 93이상의 양호한 전기적 특성을 나타냈다. 또한 투광기의 협각/중각/광자 배광을 만족하기 위하여 LED 렌즈를 설계하였으며, 신뢰성 확보 및 주위온도에 따른 광출력 변화를 최소화할 수 있는 방열설계를 실시하였다.

자동차 냉각기 호스용 EPDM 고무의 전기화학적 복합노화시험 및 고장메커니즘 (Electrochemical Combined-Stress Degradation Test and Failure Mechanisms of EPDM Rubber for Automotive Radiator Hoses)

  • 곽승범;최낙삼;신세문
    • 대한기계학회논문집A
    • /
    • 제37권1호
    • /
    • pp.1-8
    • /
    • 2013
  • 자동차용 냉각기 고무호스는 열과 기계적 하중을 받으면서 국부적으로 형성된 전기적 영향으로 인해 노화와 고장이 발생한다. 본 연구에서는 개선된 시험방법을 이용하여 고무호스의 파괴거동을 재현하였다. 냉각기 고무호스 재료인 카본블랙이 함유된 EPDM 고무를 사용하여 인장응력과 전기화학적 복합 스트레스를 가하여 노화거동을 분석하였다. 노화 시간에 따른 전류 및 저항의 변화거동을 관찰하였으며 인장 변형 스트레스와 전압 및 노화온도 조건에 따른 노화거동을 분석하였다. 고무 시험편을 수직면으로 정밀하게 절단하여 시험편 표면 및 내부의 변화거동을 분석하여 전기화학적 노화거동과 고장메커니즘을 규명하였다.