• 한국태양에너지학회 논문집
• /
• 제27권4호
• /
• pp.11-17
• /
• 2007

The purpose of this study is to check whether the plate temperature could be lower than the surrounding air by using the radiant cooling during the day time in summer at Seoul. Without an insolation shield as this experiment was performed, a few cases were found. The temperatures of the black painted plate are lower than those of the aluminium film coated plate if the following condition exist; no or small insolation over the plate, the wind velocity less than around 2 m/s, and clear sky However if there are insolation over the plate, the temperatures of the aluminium coated plate are lower than the black painted plate. Also, as the wind velocity increases, the plate temperature decreases faster. The temperature response of the small system is much faster than the large system.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.1300-1305
• /
• 2004

The purpose of this experiment is to study the radiant cooling effects by a plate directly viewing the nighttime sky. The measurements are performed at a rooftop of the Engineering building at the Dongguk University in Seoul during the month of August in 2004. The radiant cooling effects are compared using three different types of plate surfaces such as galvanized Iron, black painted, and aluminum film coated galvanized iron plate. Among these plates, the black painted surface show the lowest temperature that is lower than its ambient temperature. The maximum radiant cooling temperature difference, that is ambient temperature minus plate temperature, observed is about 5K..

• 설비공학논문집
• /
• 제17권6호
• /
• pp.605-610
• /
• 2005

The purpose of this experiment is to study the radiant cooling effects by a plate directly viewing the nighttime sky. The measurements are performed on a rooftop of the Engineering building at the Dongguk University in Seoul during the month of August in 2004. The radiant cooling effects are compared using three different types of plate sufaces, namely, galvanized iron, black painted, and aluminum film coated galvanized iron plate. Among these plates, the black Painted surface showed the lowest temperature that is lower than the ambient temperature. The maximum radiant cooling temperature difference, which is ambient temperature minus plate temperature, observed is about 5 K.

• 설비공학논문집
• /
• 제19권11호
• /
• pp.797-802
• /
• 2007

The effects of window cover on the performance of the plate type radiant cooling test system are studied. The cover materials tested are 2mm, 1mm, 0.7mm glass, Cokin 007 filter, and PVC film. The measurements are performed during the September nights of 2005 at the rooftop of the building in Seoul. The equivalent height of the building is about a building with twelve floors. The radiant cooling performance of the black painted and aluminum film coated plate are compared under no cover condition. Also the results are compared when the system has cover over the plate. In general, the covers reduce the radiant cooling temperature differences during the nighttime. Among these covers, the PVC film cover shows the best performance. In some cases, the plate with PVC film cover shows lower temperatures than the system without cover.

• 한국태양에너지학회 논문집
• /
• 제28권5호
• /
• pp.49-55
• /
• 2008

The radiant cooling(RC) effects are studied during the winter night. The plate was viewing the nighttime sky. The data were collected at the rooftop of the Engineering building at the Dongguk University in Seoul, Korea. As observed during the summer night, the plate temperature was lower than ambient temperature under the RC favorable conditions. The parameters under study are the wind velocity, cloud index, and visibility for given system size and surface condition. The results follow the same tendency with these parameters as observed from the previous study for the summer night. As long as the wind velocity is less than around 2 m/s, the radiant cooling was observed with the system under study. In some cases, the radiant cooling temperature differences (RCTD) are higher than those for the summer night. The larger the RCTD as the wind velocity decreases and as the sky becomes clear.

• 한국식품과학회지
• /
• 제18권6호
• /
• pp.479-484
• /
• 1986

농가(農家) 규모에서 활용(活用)이 가능한 경제적(經濟的)이며 제작(製作)이 간편한 태양열(太陽熱) 건조장치(乾燥裝置)로 평판식(平板式)과 튜브식(式) 집열기(集熱器)를 설계 제작하고 이들의 열이용(熱利用) 효율(效率)을 비교 분석(分析)하였는데, 집열판(集熱板)으로 흑색(黑色) 도색 함석판과 흑색(黑色) 비닐 필름을 사용하였을때 이들의 열이용(熱利用)의 효율(效率)은 평판식(平板式)에서 최대 48.2%, 평균 42.8%였고, 튜브식(式)에서 최대 25.4%, 평균 22.9%였다. 평판식(平板式)과 튜브식(式) 집열기(集熱器)에서 일사량(日射量), 방향계수, 공기의 풍량(風量)을 측정(測定)하여 공기의 온도상승도(溫度上昇度)를 예측(豫測)할 수 있는 실험식(實驗式)을 구하여, 필요한 건조(乾燥) 조건에 따라 집열면적(集熱面積)및 풍량(風量)을 결정할 수 있었다. 튜브식(式) 집열기(集熱器)를 사용해 고추를 건조(乾燥)한 결과(結果) 건조조작(乾燥操作)을 수행할 수 있었으며 건조속도(乾燥速度)는 노천건조(露天乾燥)에 比(비)헤 2배에 달하였다. 따라서 튜브식(式) 집열기(集熱器)를 농가(農家) 규모에서도 태양열(太陽熱) 이용(利用) 건조(乾燥)시설로 활용할 수 있었다.

• 분석과학
• /
• 제30권2호
• /
• pp.75-81
• /
• 2017

5-methylthioninhydrin (5-MTN) is an amino acid sensitive reagent used for the development of latent fingermarks deposited on porous surfaces such as paper and wood. The present study demonstrates that the 5-MTN can be used as a latent footwear impression enhancement reagent, by reacting with trace multivalent metal ions, which are the main components of the latent footwear impression. 5-MTN and L-alanine complex (MTN-ALA) used for the latent footwear impression development was prepared, by mixing $4.5{\times}10^{-3}M$ 5-MTN (in methanol) and $4.5{\times}10^{-3}M$ L-alanine (in methanol) in 1:1 ratio, and keeping undisturbed at room temperature for 24 h. The latent footwear impressions were deposited on white and black non-porous surfaces (glass plate, polyethylene panel, polypropylene panel, acryl panel, polyvinyl chloride (PVC) panel, poly(methyl methacrylate) (PMMA) panel, acrylonitrile-butadiene-styrene (ABS) panel, tile), and a semi-porous surfaces (painted wood). The latent footwear impressions on these surfaces were treated with MTN-ALA complex by spraying. The fluorescence of footwear impressions (occurred due to the reaction between MTN-ALA and metal complexes) was observed under a 505 nm forensic light source and an orange barrier filter. The enhancement of latent footwear impression was achieved from black surfaces without any blurring. However, the fluorescence (enhancement) of footwear impression was not observed on the white PVC, PMMA, and ABS surfaces, because the incident light interfered and reflected on the surface. The sensitivity of MTN-ALA was superior to 2,2'-dipyridil, which is a representative non-fluorescing footwear impression enhancement reagent, and similar to 8-hydroxyquinoline, which is a representative fluorescing footwear impression enhancement reagent.

• 항공우주기술
• /
• 제12권1호
• /
• pp.40-45
• /
• 2013

적외선 영상을 획득하는 인공위성의 적외선 검출기는 임무 궤도에서 정확한 성능을 보장받기 위해 발사 전 지상에서 흑체를 이용한 검보정 환경시험을 거쳐야 한다. 적외선 탑 재체의 검보정 기준이 되는 대구경흑체는 궤도환경 지상시험을 위해 진공환경에 적합한 재질로 구성되어야 하며, $-40^{\circ}C$에서 $+40^{\circ}C$까지의 온도 범위에서 중심 80 %의 영역에 대해 $2^{\circ}C$ 이하의 표면 온도 균일도와 0.95 이상의 방사율을 가져야 한다. 열유동해석 결과로 도출된 대구경흑체는 $1m{\times}1m{\times}8mm$의 크기의 구리판에 방사율을 높이기 위한 알루미늄 하니콤 코아를 부착하고, 블랙페인트를 도포하여 제작되었으며, 온도 조절을 위해 뒷면에는 질소가스 흐름을 위한 구리튜브가 용접되었다. 한국항공우주연구원의 광학열 진공챔버에서 수행된 대구경흑체 검증시험에서 20개의 저항온도센서와 적외선카메라를 이용하여 표면 온도 분포를 측정하여 ${\pm}40^{\circ}C$의 온도 범위에서 약 $1^{\circ}C$의 온도 균일도를 가짐을 확인하였다. 표면방사율은 대기압, $40^{\circ}C$에서 0.975로 측정되었다.

• Journal of Biosystems Engineering
• /
• 제3권1호
• /
• pp.64-76
• /
• 1978

A dimensional supply of petroleum fuels and increased competition for petroleum products has made the conservation of energy in grain drying an important cost and management factor. Research on solar grain drying is directed toward utilization of a renewable energy source as an alternative to petroleum fuels for drying. There are many technical and economic problems in accepting and adopting solor energy as a new energy source for grain drying. The purpose of this study are to assess the state of the art of solar grain drying and to find out the problems by reviewing literatures available. The results obtained may be summarized as follows; 1.It may be considered that the weather conditions in October of Korea was satisfactory for the forced natural air and solar heated air drying. 2. Solar energy is considered more applicable to low-temperature, In-storage drying systems than to high-temperature, high-speed drying systems. In-storage drying systems require low levels of heat input. The costs of collector systems to provide low temperature are considerably cheaper than for high-temperature systems. 3. Tubular type collector made of polyvinyle film seems to be the most practical at this stage of development and black-painted bare-plate collectors mounted on the outside of a typical, round, low-temperature drying bin can supply an appreciable amount of the energy efficiently needed for low-temperature grain drying at a lower cost. 4. All of the grains in solar drying tests was successfully dried up to safe storaged moisture levels without significant spoilage. Drying rates with solar system were faster than natural air drying systems, and usually a little slower than similar low-temperature electric drying systems. 5. Final grain moisture levels were lower in solar tests than in natural air tests, and generally higher than in tests with continuous heated air. 6. Savings of energy by use of solar collectors ranged from 23% to 55%, compared to the natural and electric ileated air drying systems. However, total drying cost effectiteness tvas not significant. Therefore, it is desirable that solar grain dry-ing sIFstems tvhich could be suitable for multiple heating purposes on farms shouldbe developed. 7. Supplemental heat with solar radiation did little to reduce air flow requirementsbut refuced drying time and increased the p\ulcornerobability of successful drying duringdrying poriod.