• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.31 no.7
• /
• pp.490-495
• /
• 2018

A multielectrode electronic paper film capable of expressing a single-color image was fabricated by injecting color electronic ink into an electronic paper panel; on the basis of its reflective or transparent properties, it is possible to control the expression of six single-color images and their transmittance. In this study, a single-color image was represented by driving a multielectrode electronic paper film; color coordinates were measured. The six capable single colors were yellowish pink (0.444, 0.354), white (0.355, 0.352), black (0.241, 0.241), orange (0.514, 0.360), reddish orange (0.606, 0.338), and reddish purple (0.469, 0.145). Color particles used in this paper were black and white, by which six colors are accomplished, but more single-color images can be combined by using cyan, magenta, and yellow particles.

• Applied Chemistry for Engineering
• /
• v.33 no.4
• /
• pp.381-385
• /
• 2022

It is very important to secure the adhesion durability between the base film and the conductive paste for the development of a sensor for detecting hazardous chemicals. In this study, an ester binder was used to improve the adhesive properties which can be a problem when applying the sensor to the cross cut 0B or 1B grade. This problem was found while evaluating the adhesive properties by coating the polyaniline/graphene nano plate (GNP) paste on the polyethylene terephthalate (PET) film. When 10 wt% or more of the ester-based binder was added, the cross cut grade to which the sensor can be applied was 3B or higher. It was confirmed that the excessive addition of the binder may affect the electrical properties of the conductive paste and actually decrease the reactivity to sulfuric acid. To improve the electrical property, a carbon black (CB) content was varied resulting in the optimum electrical property observed at 2 wt% of CB.

• Korean Journal of Plant Resources
• /
• v.20 no.4
• /
• pp.331-335
• /
• 2007

This study was conducted to investigate the soil mulching effect on bolting and growth of Angelica koreana Max. The bolting ratio were 8.4% of non-mulching, 11.4% of black polyethylene film, 13.6% of transparent polyethylene film, 6.4% of rice-straw mulching. The mulching of polyethylene film induced higher bolting response than other materials. The radical leaf length, the number of leaf and crown in black P.E. film mulched were all higher than those of non-mulching and rice-straw mulching. The yield of the underground part of P.E film mulching was higher than non-mulching and rice-straw mulching. Comparing with other treatments, the dry root yield of black P.E. film mulching showed the most.

• Korean Journal of Organic Agriculture
• /
• v.23 no.4
• /
• pp.897-909
• /
• 2015

This study was conducted to evaluate the effect of weed control on disease incidence, plant growth and fruit quality, and to provide effective method to farmers at the vineyard. At the raincoat greenhouse cultivating 'Campbell Early', several weed controlling methods were compared to the control. Mean temperature of plots between soil covering (C.B., W.F., S.N., P.F. and R.H.) and non soil covering (M.W.2, M.W.3 and U.T.) were similar with $26.2^{\circ}C$ (July) and $25.8^{\circ}C$ (Aug.), but humidity of soil covering was sharply decreased in late-July under 40%. Soil water were all higher in soil covering plots than that of non-soil covering, however, soil temperature was recorded lower in soil covering plots. Disease incidence of Peudocercospora vitis according to soil coverings had effect on black plastic film mulching by decreasing grapevine leaf spot to 85% in July, 69% in August, compared to the control, with showing the smallest lesion incidence in FMB. Among growth characters, internode length and internode width of black plastic film mulching was higher than that of the control. SPAD value of black plastic film mulching was recorded the highest. It was not significant among the treatments, but brix was recorded highly in black plastic film mulching with $14{\sim}15^{\circ}Brix$.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.11
• /
• pp.797-802
• /
• 2007

The effects of window cover on the performance of the plate type radiant cooling test system are studied. The cover materials tested are 2mm, 1mm, 0.7mm glass, Cokin 007 filter, and PVC film. The measurements are performed during the September nights of 2005 at the rooftop of the building in Seoul. The equivalent height of the building is about a building with twelve floors. The radiant cooling performance of the black painted and aluminum film coated plate are compared under no cover condition. Also the results are compared when the system has cover over the plate. In general, the covers reduce the radiant cooling temperature differences during the nighttime. Among these covers, the PVC film cover shows the best performance. In some cases, the plate with PVC film cover shows lower temperatures than the system without cover.

• Electrical & Electronic Materials
• /
• v.10 no.7
• /
• pp.713-718
• /
• 1997

Polyaniline free standing films cast from N-methyl-2-pyrrolidinone(NMP) solution, camphorsulfonic acid(HCSA), dodecylbenzensulfonic acid(HDBSA), inorganic matter(carbon black, graphite) and metal(silver) were prepared by processings. The properties of these films such as crystallinity, near-infrared absorption spectra and conductivity were investigated. The HCSA and HDBSA doped polyaniline films cast from m-cresol and chloroform solvents showed the metallic property and high crystallinity, respectively. The value of conductivity in the HCSA doped polyaniline film obtained 180 S/cm. We have obtained the value of conductivity 200 S/cm in the metal(silver) doped polyaniline film, which is higher than that of the HCSA doped polyaniline film. The metal(silver) doped polyaniline film shows good properties as a electromagnetic shielding material.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.870-872
• /
• 2008

It is known that AC electric field to drive IPS mode of liquid crystal display (LCD) causes reduction of the contrast after long period of display operation. Our results are presented in this paper on a base of a model of interaction between surface of PI alignment film and LC molecules. We conclude that the surface viscosity of PI alignment film is one of the most important factors for the contrast reduction phenomenon.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2003.07a
• /
• pp.917-919
• /
• 2003

The effect of conducting carbon layer on the performance of AC thin film EL display was examined. It was found that incorporation of small amount of carbon nano-tube and conducting additive greatly improve the luminance of the inorganic EL compared to the one with only conducting carbon black.

• The Korean Journal of Ceramics
• /
• v.2 no.4
• /
• pp.221-225
• /
• 1996

In diamond synthesis by metal film growth method under high pressure and high temperature, the nucleation and growth of diamond was observed dependent on the carbon source variation from graphite powder to the heat treated powders of lamp black carbon. At the low driving force condition near equilibrium pressure and temperature line, nucleation of diamond did not occur but growth of seed diamond appeared in the synthesis from lamp black carbon while both nucleation and growth of diamond took place in the synthesis from graphite. Growth morphology change of diamond occurred from cubo-octahedron to octahedron in the synthesis from graphite but very irregular growth of seed diamond occurred in the synthesis from lamp block carbon. Lamp black carbon transformed to recrystallized graphite first and very nucleation of diamond was observed on the recrystallized graphite surface. Growth morphology of diamond on the recrystallized graphite was clear cubo-octahedron even at higher pressure departure condition from equilibrium pressure and temperature line.

• Journal of the Korean Society for Heat Treatment
• /
• v.22 no.5
• /
• pp.275-281
• /
• 2009

The microstructure of copper films prepared by a sputtering apparatus, which was fabricated to enhance the shadowing effect, was investigated by scanning electron microscopy. Black copper films were deposited on copper wires at an Ar pressure of 10 Pa. The black films had an extremely porous structure composed of separated columns. This structure is quite similar to that of black titanium films prepared by cylindrical magnetron sputtering. These results suggest that the porous structure composed of separated columns is easily formed for metal films by enhancing the shadowing effect.