• Advances in environmental research
• /
• 제8권1호
• /
• pp.71-84
• /
• 2019

Effective waterproofing of structures was a compulsory constraint to avoid leaks and dampness or humidity in walls, ceilings, roofs underground tank and underground room. Traditionally used methods of roof waterproofing were bitumen with tinny seared clay tiles are very troublesome, overwhelming time and involving high labor cost. These waterproofing methods are not allocation the purpose due to their intrinsic disadvantages. Prepackaged polymer modified slurries (PPPMS) are now attainment the vogue and easy to use, easily available in the market, cheaper in cost and more workable than the traditional methods of waterproofing. An experimental study has shown that prepackaged polymer modified slurries (PPPMS) are superior in cost and performance to as a roof water proof coatings. Bituminous coatings were mixed with water and different combination of prepackaged polymer modified slurries and primer respectively, to find optimum coverage underneath worst atmospheric conditions. Every specimen of different proportioned was applied on plane roofs and through the passage of time, their performance was checked, assessed and associated with each other. The roof of approximately 40000 ft² area of prepackaged polymer modified slurries was used will give us hundred percent result (no water seepage or no water absorption) therefore no complaints as compare to roofs area of approximately 24000 ft² bituminous coating was used for waterproofing they have shown the result of 30 to 40 percent water seepage. This result shows that prepackaged polymer modified slurries were two times cheaper than bituminous coating. Comparing an equal number of surfaces coated with a polymer modified prepackaged mortar and bitumen the prepackaged polymer modified slurries (PPPMS) showed excellent performance, ease of application and low bitumen coating cost.

• 한국지반공학회지:지반
• /
• 제3권1호
• /
• pp.39-52
• /
• 1987

말뚝에 작용하는 부주변마찰력의 양상과 감소방법을 일련의 모형실험을 통하여 평가하였다. 감소 방법으로는 역청재와 확대선단부를 사용하였다. 실험은 점성토로 이루어진 모형지반에서 지름이 3.2cm인 모형강관말뚝을 사용하여 수행하였으며 부주변마찰력으로 인한 하향력을 압력계로 측정하였다. 특히 여러가지 경우에 대한 확대선단부의 감소효과는 인발실험을 통하여 알아보았다. 보통말뚝인 경우에 부주변마찰력은 깊이에 따라 0.25(유효상재압)로 나타나며 말뚝과 주변 흙과의 상대변위가 아주 작아도 부주변마찰력은 충분히 발휘된다. 말뚝에 역청재를 도포하여 부주변마찰력을 50%이상 감소시킬 수 있다. 확대선단부의 사용도 ㅂ주 변마찰력의 감소에 효과적이었으며, 말뚝의 지름에 대한 착러설단부의 지름인 커지거나 주변의 강도가 커질수록 그 효과는 커진다. 역청재와 확대선단부를 종시에 사용하던 약 90%의 감소효과가 있다.

• Advances in nano research
• /
• 제4권1호
• /
• pp.15-29
• /
• 2016

A low cost environmentally benign surface coating binder is highly desirable in the field of material science. In this report, castor oil based hyperbranched polyester/bitumen modified fly ash nanocomposites were fabricated to achieve the desired performance. The hyperbranched polyester resin was synthesized by a three-step one pot condensation reaction using monoglyceride of castor oil based carboxyl terminated pre-polymer and 2,2-bis (hydroxymethyl) propionic acid. Also, the bulk fly ash of paper industry waste was converted to hydrophilic nano fly ash by ultrasonication followed by transforming it to an organonano fly ash by the modification with bitumen. The synthesized polyester resin and its nanocomposites were characterized by different analytical and spectroscopic tools. The nanocomposite obtained in presence of 20 wt% styrene (with respect to polyester) was found to be more homogeneous and stable compared to nanocomposite without styrene. The performance in terms of tensile strength, impact resistance, scratch hardness, chemical resistance and thermal stability was found to be improved significantly after formation of nanocomposite compared to the pristine system after curing with bisphenol-A based epoxy and poly(amido amine). The overall results of transmission electron microscopic (TEM) analysis and performance showed good exfoliation of the nano fly ash in the polyester matrix. Thus the studied nanocomposites would open up a new avenue on development of low cost high performing surface coating materials.

• 한국지반공학회논문집
• /
• 제26권11호
• /
• pp.99-110
• /
• 2010

연구에서는 부주면마찰력이 발생하는 3개 지역 총 16본 말뚝의 현장 계측 자료들을 바탕으로 국내 지반 특성에 맞는 주면마찰계수($\alpha$, $\beta$ 계수)의 분포범위를 압밀도(U)와 역청재(S.L) 도포 유무에 따라 역산정하였다. 역청재 도포 말뚝의 부주면마찰력 저감효과는 50~90% 정도인 것으로 나타났으며, 기존 설계에 사용되던 제안 값과의 비교를 통해, 본 연구에서 산정된 $\alpha$와 $\beta$계수가 적정 범위에 있으며, 그 결과 국내지반조건을 반영한 말뚝의 장, 단기 주면마찰력을 예측할 수 있는 기본자료를 제시하였다.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2005년도 춘계 학술기술논문발표대회 논문집
• /
• pp.185-190
• /
• 2005

Safe, economical and environment-friendly tunnel construction are required again along with social continuous development, the importance of waterproof work that is portion that actually all of user and builder can find that is embossed by tunnel construction's one of important construction. Also, ECB (Ethylen Copolymer Bitumen) sheet that is used in existing tunnel waterproofing method (ECB waterproofing method) being black because asphalt (Bitumen) is added, by purpose that make illumination of tunnel interior brightly and scar discovery eases in sheet with coating white film, but ECB that is used present according as ECB that asphalt is added does not satisfy high tensile strength of construction field, quality standard of extension. Also ECB denigrates color of black M/B that asphalt is excepted.

• 한국도로학회논문집
• /
• 제16권6호
• /
• pp.121-128
• /
• 2014

PURPOSES : The objective of this study is to evaluate the tack-coating material's properties using the bitumen bond strength(BBS) test and damping test as function of changed curing times. In this study, bonding strength tests were performed according to the curing time of tack coating materials. METHODS : In order to investigate bonding characteristic of tack coating materials, the Pneumatic Adhesion tensile Testing Instrument(PATTI) device is used to measure the bond strength between the tack coating materials and aggregate substrate based on the AASHTO TP-91. Also, damping test as in situ test was used to determine an appropriate traffic openting time for construction vehicle. Four different tack-coating materials were used in this study. The BBS tests were performed a one hour curing and testing temperatures of $5^{\circ}C$, $15^{\circ}C$, and $25^{\circ}C$. Damping test was conducted at 30min, 60min, 90min, and 120 min of curing times with temperatures of $20^{\circ}C$ and $30^{\circ}C$. RESULTS and CONCLUSIONS : The BBS test results show various bond strength as function of tack coat materials. At the same testing condition, A tack coat material shows almost two times higher than D tack coat materials although both materials are satisfied the criteria of material's physical properties. Also, Dampting test results shows similar trend with BBS test result. The damping test result was significantly changed as function of tack coat materials. Based on this study, the tack coating material's curing time is very important. Therefore, both curing time and the bond strength's characteristic has to be considered in standard specification.