• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.22 no.4
• /
• pp.714-725
• /
• 1997

This paper proposes an image compression method using the wavelet transform and bit-plane coding of wavelet coefficients. The hierarchical application of wavelet transform to an image produces one low resoluation(the subband with lowest frequency) image and several high frequency subbands. In the proposed method, the low resolution image is compressed by a lossless method at 8 bits per each coefficient. However, the high frequency subbands are decomposed into 8 bit planes. With an adptive block coding method, the decomposed bit planes are effectively compressed using localized edge information in each bit plane. In addition, the propsoed method can control bit rates by selectively eliminating lessimportant subbands of low significant bit planes. Experimental results show that the proposed scheme has better performance in the peak signal to noise ratio (PSNR) and compression rate than conventional image coding methods using the wavelet transform and vector quantization.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2002.05c
• /
• pp.229-233
• /
• 2002

비트율 제어 기법은 일정한 양의 비트만을 사용하여 최상의 화질을 얻기 위한 것이다. 기 중에서 최적의 비트율 제어기법(Optimal Rate Control)은 실시간 전송이 필요 없는 응용 분야에서 사용하거나 또는 모델 기반 비트율 제어기법의 성능을 평가하기 위하여 사용되었다. 하지만 기존의 방법들을 저전송율 비디오 부호기에 적용하였을 때에는, 양자화 매개변수간의 의존관계 때문에 최적의 해를 구하지 못하는 문제점이 생겼다. 따라서, 본 논문에서는 라그랑제 비용함수를 사용한 비터비 알고리즘을 이용하여 저 전송율 비디오 부호기에 적용할 수 있는 최적의 비트율 제어기법을 제안할 것이다.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2000.08a
• /
• pp.189-192
• /
• 2000

A fuzzy controller for the evaluation of the quantization parameters in the H.263 coder has been introduced. We adopted a Mamdani fuzzy controller with centroid defuzzification. The inputs are variance, entropy, current motion vector and previous motion vector. This results is obtained a effective rate control technique using fuzzy Quantization.

• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.473-473
• /
• 2000

This paper presents the 2-bit parallel algorithmic ADC using current mode for parallel method algorithm. It is operated by parallel conversion, 2-bit at each moment, and increase bit numbers by serial connection. The circuit operates in current mode. The comparison ratio can be controlled while working under mode operation. The circuit design used 0.8 ${\mu}{\textrm}{m}$ CMOS technology which capable to convert 2-bit in 50 ns, power consumed 0.786 nW, with input current 0-50 mA from 3V single supply. From simulation testing, the conversion rate is much faster than other method.

• Journal of Broadcast Engineering
• /
• v.22 no.3
• /
• pp.381-396
• /
• 2017

In this paper, the perceptual rate control algorithm is studied for HEVC (High Efficiency Video Coding) encoder with bit allocation based on perceived visual quality. This paper proposes perceptual rate control algorithm which could consider perceived quality for HEVC encoding method. The proposed rate control algorithm employs adaptive bit allocation for frame and CTU level using the perceived visual importance of each CTU. For performance evaluation of the proposed algorithm, the proposed algorithm was implemented on HM 16.9 and tested for sequences in Class B under the CTC (Common Test Condition) RA (Random Access) case. Experimental results show that the proposed method reduces the bitrate of 3.12%, and improves BD-PSNR of 0.08dB and bitrate accuracy of 0.07% on average. And also, we achieved MOS improvement of 0.16 with the proposed method, compared with the conventional method based on DSCQS (Double Stimulus Continuous Quality Scale).

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.2A
• /
• pp.165-172
• /
• 2002

The concept of MPEG-2 transcoding is related to the scaling the bit rate of the previously encoded MPEG bitstream. We proposed a new rate control algorithm that outperforms existing methods and showed the performance by a computer simulation. A rate-quatization model is developed based on a priori knowledge from the given bitstream at macroblock level. The model is independent of the picture coding type, because it is designed in the DCT domain. To increase the accuracy of the model, the activity measurement is considered. By the simulation, the proposed transcoding showed the better result than that of recoding by TM5. We also concluded that MPEG-2 scalable profile is not suitable for the bit rate conversion application.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.8
• /
• pp.245-249
• /
• 2013

In this paper, we propose two rate control algorithms for multi-view extension of HEVC with two rate control algorithms adopted in HEVC and analyze the multi-view rate control performance. The proposed multi-view rate controls are designed on HEVC-based multi-view video coding (MV-HEVC) platform with consideration of high-level syntax, inter-view prediction, etc. not only for the base view but also for the extended views using the rate control algorithms based on URQ (Unified Rate-Quantization) and R-lambda model adopted in HEVC. The proposed multi-view rate controls also contain view-wise target bit allocation for providing the compatibility to the base view. By allocating the target bitrates for each view, the proposed multi-view rate control based on URQ model achieved about 1.83% of average bitrate accuracy and 1.73dB of average PSNR degradation. In addition, about 2.97% of average bitrate accuracy and 0.31dB of average PSNR degradation are achieved with the proposed multi-view rate control based on R-lambda model.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.5
• /
• pp.912-919
• /
• 1994

A new error control line code based on an extended Hamming code is proposed and its performance is analyzed in this paper. The proposed code is capable of single error correction and double error detection since its minimum Hamming distance is 4. In addition, the error detection capability can be oncreased due to the redundancy bit used for line coding. As a result, the proposed code shows lower code rate, but better spectral characteristics in low frequency region and lower residual bit error rate than the conventional error correction line code using Hamming (7, 4) code.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 1997.06a
• /
• pp.43-48
• /
• 1997

The video transmission for real-time viewing over the Internet is a core operation for the multimedia services. However, its realization is very difficult because the Internet has two major problems, namely, very narrow endpoint-bandwidth and the network jitter. We already proposed a scalable video transmission method in [8] which used MPEG-4 video VM(Verification Model) 2.0[3] for very low bit rate coding and an adaptive temporal rate control of video objects to overcome the network jitter problem. In this paper, we present the improved adaptive temporal rate control scheme for the scalable transmission. Experimental results for three test video sequences show that the adaptive temporal rate control can transfer the video bitstream at source frame rate under variable network condition.

• Journal of Broadcast Engineering
• /
• v.22 no.2
• /
• pp.193-206
• /
• 2017

In this paper, we propose a rate control method based on the $R-{\lambda}$ model that supports a parallel encoding structure in GOP levels or IDR period levels for 4K UHD input video in real-time. For this, a slice-level bit allocation method is proposed for parallel encoding instead of sequential encoding. When a rate control algorithm is applied in the GOP level or IDR period level parallelism, the information of how many bits are consumed cannot be shared among the frames belonging to a same frame level except the lowest frame level of the hierarchical B structure. Therefore, it is impossible to manage the bit budget with the existing bit allocation method. In order to solve this problem, we improve the bit allocation procedure of the conventional ones that allocate target bits sequentially according to the encoding order. That is, the proposed bit allocation strategy is to assign the target bits in GOPs first, then to distribute the assigned target bits from the lowest depth level to the highest depth level of the HEVC hierarchical B structure within each GOP. In addition, we proposed a processing method that is used to improve subjective image qualities by allocating the bits according to the coding complexities of the frames. Experimental results show that the proposed bit allocation method works well for frame-level parallel HEVC software encoders and it is confirmed that the performance of our rate controller can be improved with a more elaborate bit allocation strategy by using the preprocessing results.