• 한국농공학회지
• /
• 제38권1호
• /
• pp.116-127
• /
• 1996

This paper dealt with FEM analysis of foundation improved with pack drain. The theory on pack drain was scrutinized and observed values in the field were compared with numerical results. Work site of Kwangyang container pier was selected as a ease study in which measurement of settlement and pore water pressure was accurately carried out. Biot's consolidation equation was selected as governing One, coupled with modified Camclay model as constitutive one. Christian and Boehmer's numerical technique was adopted. Behavior of foundation with pack drain is not simple but very complicated. Discontinuity resulted from rigidity difference between adjacent materials, smear effect and complicated boundary conditions should be considered in the behavior analysis of foundation behavior. The results of numerical analysis were influenced by smear zone. In relevant to this effect, finite element analysis was carried out using the reduced horizontal coefficient of permeability in the smear zone; The numerical results were compared with observed values in surface settlement. including pore water pressure. However only lateral di5plaoement by numerical ana1Ysis was shown since its measurement was not performed in the field. The predication of settlement to be developed later can be effectively employed for the obtimization of construction. The predication of residual settlement using the data measured in the field was made by Hoshino, Asaoka and hyperbolic method. Among them, the hyperbolic method proved best one. Settlements accorded well between numsrical and observed values while pore pressure showed a slight difference. Lateral displacement showed largest values at constant distance from ground surface. The validation of foundation analysis improved with pack drain by computer program employed in this study selecting modified Cam-clay model was satisfactorily secured.

• 한국지반공학회지:지반
• /
• 제3권2호
• /
• pp.29-40
• /
• 1987

본문은 불포화토나 구석등에 이용할 수 있는 Cap-model을 필자들이 개발하고 있는 범용프로그램에 수음하여 FEM해석한 결과를 보인 것이다. Cap.model은 발표당시부터 그 유용성이 인정되고 있으나 입력데 필요한 토질매개변수와 그 확정이 어렵고 또한 해석방법이 알려져 있지 않는 상태에서 소프트 웨어 상태로 각 연구자에 의해 보존 되고 있다. 필자들은 이 모델을 이미 발표한 바 있는 범용 프로그램에 의해 상식적으로 연산할 수 있도록 하기 위하여 Cap-model의 알고리즘을 개발하여 이를 입력하므로써 Desai 등이 발표한 결과와 매우 근접한 결과를 얻었다. 아직은 정도면에서 좀더 보완을 요하지만 성취가능성이 보이고 있어 앞으로는 토질매개변수의 간 략화의 연구와 더불어 보다 더 완전한 범용프로그램의 완성을 기하고자 한다.

• 한국초전도ㆍ저온공학회논문지
• /
• 제17권2호
• /
• pp.41-44
• /
• 2015

Critical current of high-temperature superconducting (HTS) coil is influenced by its own self magnetic field. Direction and density distribution of the magnetic field around the coil are fixed after the shape of the coil is decided. If the entire part of the HTS tape has homogeneous $I_c$ distribution characteristic, quench would be initiated in fixed location on the coil. However, the actual HTS tape has inhomogeneous $I_c$ distribution along the length. If the $I_c$ distribution of the HTS tape is known, we can expect the spot within the HTS coil that has the highest probability to initiate the quench. In this paper, $I_c$ distribution within the HTS coil under self-field effect is simulated by MATLAB. In the simulation procedure, $I_c$ distribution of the entire part of the HTS tape is assume d to follow Gaussian-distribution by central limit theorem. The HTS coil model is divided into several segments, and the critical current of each segment is calculated based on the-generalized Kim model. Single pancake model is simulated and self-field of HTS coil is calculated by Biot-Savart's law. As a result of simulation, quench-initiating spot in the actual HTS coil can be predicted statistically. And that statistical analysis can help detect or protect the quench of the HTS coil.

• Geomechanics and Engineering
• /
• 제23권4호
• /
• pp.327-338
• /
• 2020

The role of precise prediction of subsurface fluids and discrimination among them cannot be ignored in reservoir characterization and petroleum prospecting. A suitable rock physics model should be build for the extraction of valuable information form seismic data. The main intent of current work is to present a rock physics model to analyze the characteristics of seismic wave propagating through a cracked porous rock saturated by a three phase fluid. Furthermore, the influence on wave characteristics due to variation in saturation of water, oil and gas were also analyzed for oil and water as wet cases. With this approach the objective to explore wave attenuation and dispersion due to wave induce fluid flow (WIFF) at seismic and sub-seismic frequencies can be precisely achieved. We accomplished our proposed approach by using BISQ equations and by applying appropriate boundary conditions to incorporate heterogeneity due to saturation of three immiscible fluids forming a layered system. To authenticate the proposed methodology, we compared our results with White's mesoscopic theory and with the results obtained by using Biot's poroelastic relations. The outcomes reveals that, at low frequencies seismic wave characteristics are in good agreement with White's mesoscopic theory, however a slight increase in attenuation at seismic frequencies is because of the squirt flow. Moreover, our work crop up as a practical tool for the development of rock physical theories with the intention to identify and estimate properties of different fluids from seismic data.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제54권11호
• /
• pp.680-688
• /
• 2005

The electrical current generated by heart creates not only electric potential but also a magnetic field. We have observed electrophysiological phenomena of the heart by measuring components of magnetocardiogram(MCG) using 61 channel superconducting quantum interference device(SQUD) system. We have analyzed the possibility and characteristics of MCG parameters for diagnosis of ischemic heart disease. A technique for automatic analysis of MCG signals in time domain was developed. The methods for detecting the position, the interval, the amplitude ratio, and the direction of single current dipole were examined in the MCG wave. The position and interval parameters were obtained by calculating the gradients of a envelope curve which could be formed by the difference between the maximum and minimum envelope of multi-channel MCG signals. We show some differences of the frequency contour map between the normal MCG and the abnormal (ischemic heart disease) MCG. The direction of single current dipole can be defined by rotating the magnetic field according to Biot-Savart's law at each point of MCG signals. In this study, we have examined the direction of single current dipole from searching for the centroids of positive and negative magnetic fields. The amplitude ratio parameters for measuring 57 deviation consisted of A$_{T}$/A$_{R}$ and other ratios. and We developed a new analysis method, which is based on the frequency contour map of electromagnetic field. Using theses parameters, we founded significant differences between normal subjects and ischemic patients in some parameters.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2014년도 추계학술대회 논문집
• /
• pp.557-561
• /
• 2014

In this work, Altair Engineering's vibroacoustic modeling approach is used to simulate the acoustic signature of a simplified automobile in a wind tunnel. The modeling approach relies on a two step procedure involving simulation and extraction of acoustic sources using a high fidelity Computational Fluid Dynamics (CFD) simulation followed by propagation of the acoustic energy within the structure and passenger compartment using a structural dynamics solver. The tools necessary to complete this process are contained within Altair's HyperWorks CAE software suite. The CFD simulations are performed using AcuSolve and the structural simulations are performed using OptiStruct. This vibroacoustics simulation methodology relies on calculation of the acoustic sources from the flow solution computed by AcuSolve. The sources are based on Lighthill's analogy and are sampled directly on the acoustic mesh. Once the acoustic sources have been computed, they are transformed into the frequency domain using a Fast Fourier Transform (FFT) with advanced sampling and are subsequently used in the structural acoustics model. Although this approach does require the CFD solver to have knowledge of the acoustic simulation domain a priori, it avoids modeling errors introduced by evaluation of the acoustic source terms using dissimilar meshes and numerical methods. The aforementioned modeling approach is demonstrated on the Hyundai Simplified Model (HSM) geometry in this work. This geometry contains flow features that are representative of the dominant noise sources in a typical automobile design; namely vortex shedding from the passenger compartment A-pillar and bluff body shedding from the side view mirrors. The geometry also contains a thick poroelastic material on the interior that acts to reduce the acoustic noise. This material is modeled using a Biot material formulation during the structural acoustic simulation. Successful prediction of the acoustic noise within the HSM geometry serves to validate the vibroacoustic modeling approach for automotive applications.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 1998년도 제17회 KOSCI SYMPOSIUM 논문집
• /
• pp.139-154
• /
• 1998

Under certain circumstance, premixed turbulent flame can be treated as wrinkled thin laminar flame and its motion in a hydrodynamic flow field has been investigated by employing G-equation. Past studies on G-equation successfully described certain aspects of laminar flame propagation such as effects of stretch on flame speed. In those studies, flames were regarded as a passive interface that does not influence the flow field. The experimental evidences, however, indicate that flow field can be significantly modified by the propagation of flames through the volume expansion of burned gas. In the present study, a new method to be used with G -equation is described to include the effect of volume expansion in the flame dynamics. The effect of volume expansion on the flow field is approximated by Biot-Savart law. The newly developed model is validated by comparison with existing analytical solutions of G -equation to predict flames propagating in hydrodynamic flow field without volume expansion. To further investigate the influence of volume expansion, present method was applied to initially wrinkled or planar flame propagating in an imposed velocity field and the average flame speed was evaluated from the ratio of flame surface area and projected area of unburned stream channel. It was observed that the initial wrinkling of flame cannot sustain itself without velocity disturbance and wrinkled structure decays into planar flame as the flame propagates. The rate of decay of the structure increased with volume expansion. The asymptotic change in the average burning speed occurs only with disturbed velocity field. Because volume expansion acts directly on the velocity field, the average burning speed is affected at all time when its effect is included. With relatively small temperature ratio of 3, the average flame speed increased 10%. The combined effect of volume expansion and flame stretch is also considered and the result implied that the effect of stretch is independent of volume release.

• 한국해양공학회지
• /
• 제21권1호
• /
• pp.31-39
• /
• 2007

Recently, the nonlinear dynamic responses among waves, submarine pipeline and seabed have become a target of analyses for marine geotechnical and coastal engineers. Specifically, the velocity field around the submarine pipeline and the wave-induced responses of soil, such as stress and strain inside seabed, have been recognized as dominant factors in discussing the stability of submarine pipeline. The aim of this paper is to investigate nonlinear dynamic responses of soil in seabed, around submarine pipeline, under wave loading. In order to examine wave-induced soil responses, first, the calculation is conducted in the whole domain, including wave field and the seabed, using the VOF-FDM method. Then, velocities and pressures, which are obtained on the boundary between the wave field and the seabed, are used as the boundary condition to compute the wave-induced stress and strain inside seabed, using the poro-elastic FEM model, which is based on the approximation of the Biot's equations. Based on the numerical results, the characteristics of wave-induced soil responses around submarine pipeline are investigated, in detail, inrelation to relative separate distance of the submarine pipeline from seabed. Also, the velocity field around the submarine pipeline is discussed.

• 대한조선학회논문집
• /
• 제35권4호
• /
• pp.1-10
• /
• 1998

본 논문에서는 비압축성 Newtonian 점성유동에서 초기에 순간 출발하는 2차원 실린더 주위의 유동을 해석하기 위해서, 와도를 기저로 한 수치해석기법을 제안하고 있다. Helmholtz 분리 형태로 표현된 Navier-Stokes방정식에서 유도되는 와도전달방정식과 압력방정식, 그리고 벡터등식에서 유도되는 속도-와도 관계식을 이 문제의 지배방정식으로 택하고, 경계조건으로는 물체표면에서 와도와 압력의 연성관계와 힘의 평형을 고려한 동적와도경계조건과 동적압력조건이 제시된다. 이 지배방정식과 경계조건을 수치적으로 처리하기 위하여, 와도와 압력이 연성되어 있는 경계조건은 Wu등(1994)이 제안한 대로, 연성관계를 유지한 채로 식을 분리하는 방법을 이용하였고, 와도전달 방정식은 유한체적법으로 계산하였으며, 그 식에 포함된 대류항을 처리하는 방법으로 TVD 방법을 이용하였다. 속도는 Biot-Savart적분항이 포함된 벡터등식에서 panel방법으로 구하고, 압력방정식은 형태가 Poisson방정식이므로 역시 panel방법을 이용하였다. 계산에 사용된 격자로 정규격자를 이용하고, 결과를 다른 수치적, 해석적 결과와 비교하여 그 타당성을 검증하였다.

• 공업화학
• /
• 제31권2호
• /
• pp.208-214
• /
• 2020

본 연구에서는 식물세포 Taxus chinensis로부터 수분 제거를 통한 바이오매스 보관 및 추출 효율 향상을 위하여, 마이크로웨이브를 이용한 건조의 특성 및 메커니즘을 조사하였다. 마이크로웨이브 파워가 100, 200, 300 W로 증가함에 따라 수분의 제거 효율은 증가하였다. 실험 데이터를 대표적 동역학적 건조 모델에 적용할 때, Page 모델과 modified Page 모델이 가장 적합한 것으로 결정되었다. 열역학적 파라미터는 마이크로웨이브를 이용한 건조의 자발적 및 흡열특성을 나타내었으며, 건조 과정에서 무질서도는 증가함을 알 수 있었다. 마이크로웨이브 파워(100~300 W)가 증가함에 따라 수분의 유효확산계수(3.445 × 10^-9~7.163 × 10^-7 ㎡/s) 및 대류물질전달계수(3.1529 × 10^-5~1.2895 × 10^-2 m/s)가 증가하였다. 작은 비오트 수(0.3890~0.7198)를 고려할 때, Taxus chinensis의 건조 진행은 외부 확산에 의해 조절됨을 알 수 있었다.