• Clinics in Shoulder and Elbow
• /
• 제18권2호
• /
• pp.105-112
• /
• 2015

In orthopedic trauma surgery, treatment of intraarticular distal humerus fractures is a challenge. With development of implants and biomechanical studies, surgical strategies with recommendations including preoperative computed tomography images, proper approaches and open reduction and internal fixation with dual plates have emerged. In addition, as an effort to provide stable fixation to permit early elbow motion, different methods of internal fixation, particularly plate configuration, have evolved. Using dual plates, either oriented parallel to each other or orthogonal, stable fixation has been achieved and satisfactory clinical outcomes have been reported. With rationales and advantages/disadvantages of each plate configuration, both techniques are selected according to surgeons' preference, and, in specific cases, one could be preferred over another. The key to successful fixation by either technique is obtaining anatomical reduction with restoration of two stable columns of the distal humerus.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.187-188
• /
• 2006

A 3-D finite element model of human thoracolumbar spine (T12-L2) was reconstructed from CT images. Various anterior and posterior instrumentation techniques were performed with long cage after corpectomy. Six loading cases were applied up to 10 Nm, espectively. The rotations of T12 with respect to L2 were measured and the stiffnesses were calculated as the applied forces divided by the segmental rotations. The posterior fixation technique increased the stiffness of the spine the most. The addition of anterior rod from 1 to 2 increased the stiffness significantly without posterior fixation, but no effect was found with posterior fixation. We found that different fixation techniques changed the stiffness of the spine.

• The Journal of Korean Physical Therapy
• /
• 제11권3호
• /
• pp.65-69
• /
• 1999

Proprioceptive neuromusculat facilitation(PNF), scapular patterns are very important for orthopaedic and neurologic patients. It is an essential treatment techniques for motor developmental disorder, CVA, cervical disk, frozen shoulder and pain control of cervical, shoulder girdle and upper extremity. Scapular patterns of PNF has 4 different type of pattern. each of them in combining of movement plane and functional movement. Biomechanically, most of PNF patterns are a concentric contraction with third-claw lever. But the movement pattern have a technique of combination of isotonic that should make a eccentric contraction with second-claw lever.

• Clinics in Shoulder and Elbow
• /
• 제26권4호
• /
• pp.438-444
• /
• 2023

Irreparable massive rotator cuff tears can significantly impact daily life; and these types of tears can be difficult to repair completely, especially in younger patients who are more active and have higher functional requirements. Since its introduction by Mihata and the colleagues, superior capsular reconstruction (SCR) has gained popularity in the treatment of irreparable massive rotator cuff tears and has shown promising short-term results. A variety of studies have focused on the clinical and biomechanical outcomes of this procedure. This article reviews the biomechanics, indications for the surgical procedure, graft options, surgical technique, and rehabilitation from SCR.

• 한국운동역학회지
• /
• 제17권2호
• /
• pp.207-216
• /
• 2007

The purpose of this study was to biomechanical analysis Judo's Kuzushi throwing motion in order to increase the effectiveness of Nage-waja(throwing technique). The Tori was a Judo player with 18 years experience(4th degree) while the Uke was a player with 2 years experience(1st degree). The kinematic data was captured using the Vicon motion system (7 cameras) and the kinetics were recorded by force plates(2 AMTI). The following were the results; While leaning to the front the subject's trunk's angle was $14.5^{\circ}$, the lower limbs angle was $23.8^{\circ}$, knee angle was $179.6^{\circ}$ and the vertical reaction of the left leg was 325.42N(BW 0.34) and the right leg was 233.7N(BW 0.47). While leaning back the subject's trunk's angle was $11.3^{\circ}$, the lower limbs angle was $4.1^{\circ}$, knee angle was $1761^{\circ}$ and the vertical reaction of the left leg was 299.53N(BW 0.43) and the right leg was 441.7N(BW 0.64). While leaning to the left the subject's trunk's angle was $30.8^{\circ}$, the lower limbs angle was $2.7^{\circ}$, knee angle was $175.2^{\circ}$ and the vertical reaction of the left leg was 711N(BW 1.03) and the right leg was 9.2N(BW 0.01). While leaning to the right the subject's trunk's angle was $36.5^{\circ}$, the lower limbs angle was $10.4^{\circ}$, knee angle was $175.2^{\circ}$ and the vertical reaction of the left leg was 13.2N(BW 0.02) and the right leg was 694.7N(BW 1.01). While leaning to the left front corner the subject's trunk's angle was $19.8^{\circ}$ (front) and $15.1^{\circ}$ (left), the lower limbs angle was $17.8^{\circ}$ (front) and $2.4^{\circ}$ (left), knee angle was $177.8^{\circ}$ (front) and $173.9^{\circ}$(left), and the vertical reaction of the left leg was 547.4N(BW 0.8) and the right leg was 117.8N(BW 0.17). While leaning to the right front corner the subject's trunk's angle was $15.4^{\circ}$ (front) and $17.7^{\circ}$ (right), the lower limbs angle was $21.1^{\circ}$, (front) and $5.7^{\circ}$ (right), knee angle was $175.5^{\circ}$ (front) and $178.9^{\circ}$(right), and the vertical reaction of the left leg was 53N(BW 0.08) and the right leg was 622.4N(BW 09). While leaning to the left rear corner the subject's trunk's angle was $9.2^{\circ}$ (back) and $13.8^{\circ}$ (left), the lower limbs angle was $2^{\circ}$, (back) and $5.7^{\circ}$ (left), knee angle was $175.5^{\circ}$ (back) and $172.8^{\circ}$(left), and the vertical reaction of the left leg was 698.2N(BW 1.02) and the right leg was 49.6N(BW 0.07). While leaning to the right rear corner the subject's trunk's angle was $8.9^{\circ}$ (back) and $19.6^{\circ}$ (right), the lower limbs angle was ${0.6^{\circ}}_"$ (back) and $3.1^{\circ}$ (right), knee angle was $174.6^{\circ}$ (back) and $175.6^{\circ}$(right), and the vertical reaction of the left leg was 7.2N(BW 0.01) and the right leg was 749.4N(BW 1.09). It was observed that during the Judo motion Kuzushii the range of the COM varied from $26.5{\sim}39.9cm$. It was concluded that the upper body leaned further than the lower body as there was knee extension. There was high left leg reaction forces while leaning to the left and likewise for the right side. It was therefore deduced that the Kuzushi was a more effective throwing technique for the left side.

• 한국CDE학회논문집
• /
• 제16권6호
• /
• pp.458-466
• /
• 2011

The morphology of a bone is closely associated with its biomechanical response. Thus, much research has been focused on analyzing the effects of variation of bone morphology with subject-specific models. Subject-specific models, which are generally achieved from 3D imaging devices like CT and MRI, incorporate more of the detailed information that makes a model unique. Hence, it may predict individual responses more accurately. Despite these powerful characteristics, specific models are not easily parameterized to the extent possible with statistical models because of their morphologic complexities. Thus, it is still proven challenging to analyze morphologic variations of subject-specific models across changes due to aging or disease. The aim of this article is to propose a generic and robust parametric morphing method for a subject-specific bone structure. We demonstrate this by using the proposed method on a model of a human proximal femur. Automatic segmentation algorithms are also presented to parameterize the specific model efficiently. A total of 48 femur models were evaluated for defining morphing vector fields. Also, several anatomical and mechanical functions of femur were considered as morphing constraints, and the NURBS interpolating technique was applied in the method to guarantee the generality of our morphed results.

• 대한소아치과학회지
• /
• 제43권4호
• /
• pp.467-472
• /
• 2016

유치나 영구치를 막론하고 근관내의 세균 감염으로 인한 치수 괴사 및 이에 따른 치근단 병소의 유발은 임상의로 하여금 근관치료나 발치와 같은 도전적인 치료에 직면하게 한다. 특히 유치에 근관치료를 필요로 하는 경우, 소아 환자의 행동조절이 한계가 있고, 치아의 해부학적 차이, 또는 계승치의 존재로 인해 근관치료가 아닌 발치와 같은 차선의 치료로 접근할 수 있다. 영구치나 유치를 막론하고 치수내 잔존 세균과 유기조직 잔사를 기계적 방법과 함께 적절한 근관세척액을 사용하여 가능한 많이 제거함으로써 치근단 주위조직의 치유를 유도하여야 한다. 차아염소산 나트륨은 우수한 항균효과와 조직용해성, 독소의 무력화 또는 도말층을 제거할 수 있는 성질 등으로 이상적인 근관세척제의 조건에 거의 합당한 약제이다. 그러므로 러버댐 및 추가적인 차폐 조치를 한 다음, 저농도의 차아염소산 나트륨을 사용하는 것이 바람직하다.

• 한국정밀공학회지
• /
• 제32권10호
• /
• pp.857-863
• /
• 2015

The need for human body posture robots has led researchers to develop dexterous design of exoskeleton robots. Quantitative techniques to assess human motor function and generate commands for robots were required to be developed. In this paper, we present a passivity based adaptive control algorithm for upper limb assist exoskeleton. The proposed algorithm can adapt to different subject parameters and provide efficient response against the biomechanical variations caused by subject variations. Furthermore, we have employed the Particle Swarm Optimization technique to tune the controller gains. Efficacy of the proposed algorithm method is experimentally demonstrated using a seven degree of freedom upper limb assist exoskeleton robot. The proposed algorithm was found to estimate the desired motion and assist accordingly. This algorithm in conjunction with an upper limb assist exoskeleton robot may be very useful for elderly people to perform daily tasks.

• Clinics in Shoulder and Elbow
• /
• 제2권1호
• /
• pp.8-13
• /
• 1999

The results of the operative treatment of the Grade III acromioclavicular joint injury is defined by the durability of the reduced joint and free of exertional pain. Several surgical techniques have been applied to reduce and stabilize the joints effectively. Resection of clavicular lateral end and subacromial decompression also could be applied to prevent post-operative arthritic change. Biomechanical studies reveals the role of clavicular elevation and rotation to achieve more than 90 degrees of elevation. It also serves as a attachment site of deltoid and trapezius muscle. The stability and mobility of the both acromioclavicular and coracoclavicular joint are important to get full functional recovery. We modified the methods of coracoacromial ligament transfer described by Weaver-Dunn and by Shoji et a!. to pre­vent pullout of the transferred ligament and to get more improved functional results. Main technical point was harvesting full thickness bone block and fix it through the key-hole to reduce pull out angle.

• 대한관절경학회지
• /
• 제9권2호
• /
• pp.102-108
• /
• 2005

전방십자인대 손상은 모든 연령 대에서 고위험 운동에 참여하는 인구의 증가로 계속 증가하고 있다. 골-슬개건-골을 이용한 전방십자인대 재건술이 가장 많이 시행되는 수술이다. 지금까지 골-슬개건-골 자가이식물이 가장 이상적인 전방십자인대 재건술의 이식물이라고 하는 주장을 바꿀 만 한 충분한 자료가 아직 없다. 골-슬개건-골 이식물의 생체역학적 특징, 공여부 이환과 적응증을 고찰하고, 이를 이용한 내시경적 전방십자인대 재건술의 수술 수기를 기술하고자 한다.