• 제목/요약/키워드: Biomechanical analysis

검색결과 476건 처리시간 0.021초

리듬체조 퐁쉐 2회전 1/2턴 기술의 역학적 분석 (The Biomechanical Analysis of Two and Half Rotation Technic of Penche in Rhythmic Gymnastics)

  • 서세미;류지선;김태삼
    • 한국운동역학회지
    • /
    • 제21권3호
    • /
    • pp.269-279
    • /
    • 2011
  • This study was analyzed the characteristics on the stability of posture while conducting a through two and half rotation technic of pench$\acute{e}$ in rhythmic gymnastics. Two rhythmical gymnastics player(LKH and SSJ) who is a member of the national team were selected, and for obtain the kinematic and kinetic variables were used a ProReflex MCU 240 infrared camera(Qualisys, Sweden) and a Type9286A force platform(Kistler, Switzerland). The mechanical factors were computed by using Visual3D program and Matlab R2009a. During the landing and rotation phase the results showed following characteristics; 1) In medial-lateral and horizontal displacement of the support foot, LKH showed smaller movement than SSJ, but SSJ showed smaller movement than LKH in swing foot. LKH showed bigger movement in medial-lateral axis of COP and vertical axis of COG, but SSJ showed bigger movement in horizontal axis of COP and medial-lateral axis of COG. 2) SSJ showed bigger maximum horizontal and vertical velocity at P1 and P2 than LKH. 3) In the inclination angle of COP and COG, SSJ showed smaller change than LKH, but within medial-lateral tilt of the shoulder, LKH performed rotation motion in horizontal position than SSJ. There was no differences in each force components during rotation, but on landing phase, the results showed a characteristic that SSJ exerted bigger breaking force and vertical force than LKH.

남자 포환던지기 시 성공과 실패에 따른 운동학적 차이 - 국가대표 황인성 선수를 중심으로 - (The Kinematic Difference According to Success and Failure of Shot-Putting - Focusing on Member of the National Team, Hwang, In-sung, Player -)

  • 류지선;박재명;김태삼
    • 한국운동역학회지
    • /
    • 제21권2호
    • /
    • pp.161-171
    • /
    • 2011
  • The purpose of this study was to identify biomechanical characteristics of glide and delivery motion of In-Sung Hwang, player who is a member of the national team among the finalists in the men's shot put at the 2010 National Sports Festivals. Three-Dimensional motion analysis using a system of 3 video cameras at a sampling frequency of 60 Hz was performed for this study. During the glide and delivery phase the results showed following characteristics; 1) The glide type was suitable for the short-long technique, but the trajectory of shot at the glide and delivery phase showed a different trajectory pattern with "S-shaped" type of elite players due to many deviating from central axis of the APSS(athletic-plus shot system). 2) Left knee was more flexed during failed trials compared to successful trials but COG was higher. Therefore, the player showed less stability of COG as he may not get enough breaking force at the left foot. 3) Furthermore, it would be required to have strong muscle power at the trunk, throwing arm, and the lower extremity in order to achieve maintain a low projection angle of the release.

견관절의 회전중심점을 고려한 동작가능 영역의 생성 (Generation of a Practical Reach Envelope with the Center of Rotation of the Shoulder Joint Considered)

  • 정의승;이상규
    • 대한산업공학회지
    • /
    • 제25권1호
    • /
    • pp.56-66
    • /
    • 1999
  • Shoulder joint is the most movable joint in human body with, at least, three degrees of freedom, since there are at least three bones and five joints involved in shoulder movement. Due to the complexity of the shoulder joint and the lack of appropriate anatomical data, modeling of the shoulder joint has been known to be extremely difficult. In many biomechanical models being used, shoulder joint is considered as a fixed point and it is also assumed that the shoulder joint does not noticeably move during the shoulder movement. However, such an assumption is not valid in real applications and causes inaccuracy, especially, in the area of workspace evaluation. The reachable area generated by a human becomes somewhat different from that of current models for those models fail to appropriately reflect the movement of shoulder joint's center of rotation. In this study, the location of the shoulder joint's center of rotation was obtained in relation to the location of humerus, on which a new model for reach envelope generation was developed for workspace evaluation. From the experiments conducted for three subjects, the initial location of the center of rotation was determined for each subject and subsequent changes in the instantaneous center of rotation were drawn as a function of flexion and abduction of the shoulder. Based on the regression analysis, the study suggested a new method for the generation of reach envelope. Comparisons were also made among real reach envelopes obtained from the experiment, the ones from the model, and the ones from the new method suggested in the study. As a result, the prediction errors incurred from the new method were significantly reduced when compared to the ones from the current approach.

  • PDF

The Change of Adjacent Segment and Sagittal Balance after Thoracolumbar Spine Surgery

  • Kim, Kang-San;Hwang, Hyung-Sik;Jeong, Je-Hoon;Moon, Seung-Myung;Choi, Sun-Kil;Kim, Sung-Min
    • Journal of Korean Neurosurgical Society
    • /
    • 제46권5호
    • /
    • pp.437-442
    • /
    • 2009
  • Objective : To characterize perioperative biomechanical changes after thoracic spine surgery. Methods : Fifty-eight patients underwent spinal instrumented fusions and simple laminectomies on the thoracolumbar spine from April 2003 to October 2008. Patients were allocated to three groups; namely, the laminectomy without fusion group (group I, n = 17), the thoracolumbar fusion group (group II, n = 27), and the thoracic spine fusion group (group III, n = 14). Sagittal (ADS) and coronal (ADC) angles for adjacent segments were measured from two disc spaces above lesions at the upper margins, to two disc spaces below lesions at the lower margins. Sagittal (TLS) and coronal (TLC) angles of the thoracolumbar junction were measured from the lower margin of the 11th thoracic vertebra body to the upper margin of the 2nd lumbar vertebra body on plane radiographs. Adjacent segment disc heights and disc signal changes were determined using simple spinal examinations and by magnetic resonance imaging. Clinical outcome indices were determined using a visual analog scale. Results : The three groups demonstrated statistically significant differences in terms of angle changes by ANOVA (p<0.05). All angles in group I showed significantly smaller angles changes than in groups II and III by Turkey's multiple comparison analysis. Coronal Cobb's angles of the thoracolumbar spine (TLC) were not significantly different in the three groups. Conclusion : Postoperative sagittal balance is expected to change in the adjacent and thoracolumbar areas after thoracic spine fusion. However, its prevalence seems to be higher when the thoracolumbar spine is included in instrumented fusion.

인공수근관절과 의수를 개발하기 위한 최적설계법과 유한요소법에 의한 수근관절의 역학적해석 (Force Analysis of Wrist Joint to Develop Wrist Implant and Mechanical Hand Using Optimization Technique and Finite Element Method)

  • Jung-Soo Han
    • 한국안전학회지
    • /
    • 제12권3호
    • /
    • pp.178-184
    • /
    • 1997
  • 외력의 작용에 의해 발생되는 인체 내부의 내응력에 대한 이해가 중요하게 됨에 따라, 인간의 생체모델에서 근력이나 관절내에서의 응력분포를 밝히기 위한 다수의 수학적 모델이 소개되어져 왔다. 그러나 고체모델이나 인공손목관절의 개발에 무엇보다도 중요한 실제에 가까운 3차원적인 수학적 모델의 개발은 지금까지 성공적이지 못하였다. 본 연구에서는 인체의 손목관절에서 원위 요골과 척골로 구성되어진 3차원 수학적 모델과, 정교하게 재구성되어진 2차원의 유한요소법을 이용한 수학적 모델을 완성함에 있다. 본 연구에서는 동적운동시의 손목관절에서 근력과 원위 요골과 척골로 전달되어지는 힘과 관절내의 응력분포를 수학적 모델을 통하여, 정확하게 예측할 수 있는 가능성을 보여 주었다. 본 연구에서 추출되어진 결과는 동적운동 시 (반복운동), 손목관절을 이루고 있는 원위 요골과 척골에 상당히 많은 양의 힘이 전달되어 짐을 밝히었으며, 이것은 반복운동에 의하여 손목관절에 종종 발생하는 누적성질환과 깊은 연계성을 갖고 있음을 보여 주고 있다.

  • PDF

Accelerated L5-S1 Segment Degeneration after Spinal Fusion on and above L4-5 : Minimum 4-Year Follow-Up Results

  • Park, Jeong-Yoon;Chin, Dong-Kyu;Cho, Yong-Eun
    • Journal of Korean Neurosurgical Society
    • /
    • 제45권2호
    • /
    • pp.81-84
    • /
    • 2009
  • Objective : Many biomechanical and clinical studies on adjacent segment degeneration (ASD) have addressed cranial segment. No study has been conducted on caudal segment degeneration after upper segment multiple lumbar fusions. This is a retrospective investigation of the L5-S1 segment after spinal fusion at and above L4-5, which was undertaken to analyze the rate of caudal ASD at L5-S1 after spinal fusion on and above L4-5 and to determine that factors that might have influenced it. Methods : The authors included 67 patients with L4-5, L3-5, or L2-5 posterior fusions. Among these patients, 28 underwent L4-5 fusion, 23 L3-5, and 16 L2-5 fusions. Pre- and postoperative radiographs were analyzed to assess degenerative changes at L5-S1. Also, clinical results after fusion surgery were analyzed. Results : Among the 67 patients, 3 had pseudoarthrosis, and 35 had no evidence of ASD, cranially and caudally. Thirteen patients (19.4%) showed caudal ASD, 23 (34.3%) cranial ASD, and 4 (6.0%) both cranial and caudal ASD. Correlation analysis for caudal ASD at L5-S1 showed that pre-existing L5-S1 degeneration was most strongly correlated. In addition, numbers of fusion segments and age were also found to be correlated. Clinical outcome was not correlated with caudal ASD at L5-S1. Conclusion : If caudal and cranial ASD are considered, the overall occurrence rate of ASD increases to 50%. The incidence rate of caudal ASD at L5-S1 was significantly lower than that of cranial ASD. Furthermore, the occurrence of caudal ASD was found to be significantly correlated with pre-existing disc degeneration.

Relationship between Class III malocclusion and hyoid bone displacement during swallowing: a cine-magnetic resonance imaging study

  • Gokce, Sila Mermut;Gokce, Hasan Suat;Gorgulu, Serkan;Karacay, Seniz;Akca, Eralp;Olmez, Huseyin
    • 대한치과교정학회지
    • /
    • 제42권4호
    • /
    • pp.190-200
    • /
    • 2012
  • Objective: The displacement of the hyoid bone (HB) is a critical biomechanical component of the swallowing function. The aim of this study was to evaluate the swallowing-induced vertical and horizontal displacements of the HB in subjects with 2 different magnitudes of skeletal Class III malocclusion, by means of real-time, balanced turbo-field-echo (B-TFE) cine-magnetic resonance imaging. Methods: The study population comprised 19 patients with mild skeletal Class III malocclusion, 16 with severe skeletal Class III malocclusion, and 20 with a skeletal Class I relationship. Before the commencement of the study, all subjects underwent cephalometric analysis to identify the nature of skeletal malformations. B-TFE images were obtained for the 4 consecutive stages of deglutition as each patient swallowed 10 mL of water, and the vertical and horizontal displacements of the HB were measured at each stage. Results: At all stages of swallowing, the vertical position of the HB in the severe Class III malocclusion group was significantly lower than those in the mild Class III and Class I malocclusion groups. Similarly, the horizontal displacement of the HB was found to be significantly associated with the severity of malocclusion, i.e., the degree of Class III malocclusion, while the amount of anterior displacement of the HB decreased with an increase in the severity of the Class III deformity. Conclusions: Our findings indicate the existence of a relationship between the magnitude of Class III malocclusion and HB displacement during swallowing.

90도 회전 시 보행속도가 하지의 내외 회전에 미치는 효과 (Effect of Walking Speed on Lower Extremity Internal and External Rotation While Turning 90 Degrees)

  • 윤장원
    • 한국전문물리치료학회지
    • /
    • 제8권4호
    • /
    • pp.1-16
    • /
    • 2001
  • 회전(turning)은 보행 중 방향을 바꾸는 운동 기술(motor skill)이고, 회전 전략(turning strategy)은 회전을 완수하는데 사용되는 일반적 행동 전형(generalized movement pattern)이다. 회전에 대한 보행속도의 영향은 분명하지 않다. 이 연구의 목적은 보행속도의 돌기 전략에 대한 영향을 분석하고 보행속도의 하지 내외 회전(internal and external rotation)에 대한 영향을 분석하는 것이다. 건강한 젊은 성인 15명이 이 연구에 자발적으로 참여하였다. 맥리플렉스 측정 장치(MacReflex measurement system)가 동작 분석(motion analysis)을 위해 사용되었다. 각각의 자원자들은 보행 중 90도 왼쪽으로 회전을 10회씩 완수하였다. 각각의 시도마다 보행속도를 다르게 하기 위해서 세 가지의 다른 요구들(slow, regular, fast)이 임의적으로 주어졌고 각각의 실제 보행속도가 자원자의 무게중심 변화에 따라 구해졌고 요구별 평균이 구해졌다. 회전 안쪽 발의 스핀(in side foot spin)은 보행속도가 증가함에 따라 증가했지만, 회전 바깥쪽 발의 스핀(out side foot spin)은 보행속도와 상관이 없었다. 하지의 내외 회전은 보행속도와는 상관이 없었지만, 같은쪽 발의 스핀과는 역관계가 있었다. 회전은 발 스핀이 있는 돌기와 발 스핀이 없는 돌기로 구분되는 것이 합당한 듯 하다. 제한된 시간과 공간 내에서 스핀은 보행속도가 빨라질수록 몸의 전방 운동량(forward momentum)에서 몸의 전방 운동량(forward momentum)으로의 전환이 스핀이 없는 회전 시보다 효율적이다. 고관절의 내외 회전 근육들은 회전전략에 상관없이 회전되는 동안 몸의 역학(body mechanics)을 조절하는데 중요한 역할을 맡고 있는 것으로 보인다. 앞으로 회전 시 몸의 생체 역학적 그리고 신경 근육적 기전들(biomechanical and neuromuscular mechanisms)을 밝히는 연구들이 필요하다.

  • PDF

이동식 틀비계 사용 작업 시 작업대 높이, 안전난간 유무, 숙련도에 따른 척추 안정성 분석 (Analysis of Spinal Stability Affected by Working Height, Safety Handrail and Work Experience in Using Movable Scaffold)

  • 김정룡;민승남;성시훈
    • 대한인간공학회지
    • /
    • 제29권3호
    • /
    • pp.347-356
    • /
    • 2010
  • The purpose of this study is to analyze the spine stability by comparing muscle activation in various scaffold working conditions. The independent working conditions were designed by two levels of working height, existence and absence of safety handrail, and the two levels of expertise. The corresponding activities of the agonist and antagonist muscles of spine were simultaneously recorded by using EMG. As results, novice worker showed increased muscle activity while doing the task on the 2nd floor, absence of handrail. And expert showed the increase of co-contraction while working on the 2nd floor without handrail. Such co-contraction was found to increase the spine stability when the working condition become risky. On the other hand, the co-contraction was prolonged, the spine muscle fatique and disc pressure could be increased, which would increase the risk of musculo-skeletal disorder. The results of co-contraction in this study indicates that the motor control system responds to maintain the stability of the spine particularly when workers cognitively recognize the danger of falling or imbalance. This study also quantitatively accounted for the biomechanical cause of LBP among workers who has to prevent themselves from falling. Therefore, if can be said that safe environment preventing falling can also prevent workers from MSDs as well. Such knowledge can be applied to design ergonomic workplace environment as well as movable scaffold.

Backward Sway 동안의 자세움직임 형태에 대한 근전도와 생체역학적 분석 (Electromyographic and Biomechanical Analysis of Postural Movement Patterns During the Backward Sway)

  • 류승현
    • 한국전문물리치료학회지
    • /
    • 제2권2호
    • /
    • pp.1-8
    • /
    • 1995
  • 이 논문의 주목적은 정상인을 대상으로 각기 다른 3가지의 (체중의 1.5 %, 3.0 %, 9.0 %) 부하를 통해서 자세의 불균형을 유발시켰을 때 나타나는 postural movement patterns을 기술하기 위한 연구이다. 연구대상의 허리중심에 체중부하를 주어 균형이 뒤로 이동하게 하여, surface EMG(표면 근전도)를 통하여 Tibialis anterior(Ta), Gastrocnernius(Gc), Quadriceps femoris(Qc), Hamstring(Ha), Rectus abdominalis(Ab)와 Paraspinalis(Pa) 근육들의 motor recruitment pattern(운동회집형태)를 측정하였다. 그리고 비디오 촬영은 고관절, 슬관절, 족관절의 움직임을 보기 위해 사용하였다. 특히 근전도 (EMG)는 자세반응 검사에 있어 첫 근반응(근수축) 경과시간(FR)과 분절간격간의 (ID)시간을 조사하는데 사용되었다. 이 연구의 결과는 4가지 중요한 사실을 전해주고 있다. 첫 번째로서, 연구대상자에게 체중의 1.5 %의 부하를 적용하였을 때 Ta가 가장 먼저 수축을 시작하였고(FR:$88{\pm}19.4$ ms) 발목과 대퇴사이의 분절 간격간(ID)의 평균은 +9.3 ms였다. 또한 족관절의 변화가 가장 뚜렷하여 Nashner(1985)의 족기전을 뒷받침하고 있다. 둘째로는 연구대상자에게 체중의 3.0 %의 부하를 주었을 때 Qc와 Ab근육이 원위부에서 근위부 순서로 수축하였고, 첫 번째 근육수축시간은 ($82{\pm}39.2$ ms)였다. 그리고 이때 분절간격의 평균은 +8.3ms 이였고 Ta는 거의 반응하지 않았다. 족관절과 슬관절에 비해 고관절의 변화가 가장 현저하게 나타났고, 이 또한 Nashner의 고관절 기전과 같은 현상을 보였다. 셋째로 연구 대상자에게 체중의 9.0 % 부하를 허리에 적용하였을 때 근수축은 근위부에서 원위부 순서를 이루어졌다. 즉 Ab,Qc, Ta, Ps순으로 근수축 되었다. Ab가 처음으로 수축하여 첫 반응(FR)은 $73{\pm}3.2$ ms 이였고 슬관절과 고관절의 변화가 가장 뚜렷하였다. 넷째로 연구 대상자에게 체중의 9.0 %부하를 적용하였을 때, 균형을 잡기 위해 뒷걸음치는 것이 관찰되었고 이때 근수축 순서는 Ta,Ab.Ps,Qc,Hs였다. 이 결과는 Nasher의 결과와 불일치하였다. 이상과 같은 결과에서 연구대상자의 자세운동형태(postural movement patterns)는 각기 다른 부하 정도와 시간에 따라 합성적으로 이루어지는 것으로 보여졌다. 특히, 자세운동형태는 부하의 적용위치와 연구대상자의 최근의 경험에 영향을 받은 것으로 밝혀졌다. 결론적으로 말하면 자세운동형태는 중앙신경계의 제한적(한정적) 명령 시스템에 의해서 움직임(movement)이 발생하기 전에 조직된다는 Nashner의 가설을 뒷받침하였다.

  • PDF