• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.1074-1077
• /
• 2002

Biomechanical behavior of the human femur is very important in various clinical situations. In this study, the data of FE models based on DICOM file exported from Computed tomography(CT). We generated FE models(voxel model, tetra model) of human femur using CT slide image. We compared them with Yon Mises stress results derived from finite element analysis(FEA). Comparing the two models, we found a correlation of them. As a result, the tetra model based proposed marching cube algorithm is a valid and accurate method to predict parameters of the complex biomechanical behavior of human femur.

• Restorative Dentistry and Endodontics
• /
• 제40권2호
• /
• pp.161-165
• /
• 2015

Three-dimensional (3D) reconstruction of cone-beam computed tomography (CBCT) scans appears to be a valuable method for assessing pulp canal configuration. The aim of this report is to describe endodontic treatment of a mandibular second premolar with aberrant pulp canal morphology detected by CBCT and confirmed by 3D modeling. An accessory canal was suspected during endodontic treatment of the mandibular left second premolar in a 21 year old woman with a chief complaint of pulsating pain. Axial cross-sectional CBCT scans revealed that the pulp canal divided into mesiobuccal, lingual, and buccal canals in the middle third and ended as four separate foramina. 3D modeling confirmed the anomalous configuration of the fused root with a deep lingual groove. Endodontic treatment of the tooth was completed in two appointments. The root canals were obturated using lateral compaction of gutta-percha and root canal sealer. The tooth remained asymptomatic and did not develop periapical pathology until 12 months postoperatively. CBCT and 3D modeling enable preoperative evaluation of aberrant root canal systems and facilitate endodontic treatment.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2008년도 춘계학술대회 논문집
• /
• pp.35-36
• /
• 2008

• 대한의용생체공학회:의공학회지
• /
• 제20권5호
• /
• pp.581-586
• /
• 1999

척추의 생체역학적 해석을 위한 유한요소기법을 이용한 컴퓨터 시뮬레이션은 척추의 손상에 대한 발생원인과 기전을 이해하고 치료의 효과를 예측하는 유용한 수단으로 기대되고 있다. 본 논문에서는 요추의 2차원 CT 영상을 이용하여 유한요소해석을 위한 척추의 3차원 모델링에 소비되는 많은 시간을 줄일 수 있도록 3차원 형상모델을 CT 형상 데이터와 형상변수를 이용, 각각 구현하는 과정을 자동화하여 이를 비교하였다.

• 대한의용생체공학회:의공학회지
• /
• 제19권4호
• /
• pp.423-429
• /
• 1998

인두는 구강과 위장, 비강과 폐의 중간에서 능동적으로 구강을 통해 섭취되는 음식물과 비강을 통해 흡입되는 공기의 통로역할을 하는 주요한 기관이다. 본 연구는 유한요소기법을 이용한 인두의 3차원 구조의 재구성 과정을 거쳐 인두의 생체역학모델을 구현하여 각단면에서의 단면적을 유한요소모델의 시뮬레이션 결과에 의한 변위를 이용하여 산출하여 최적화 과정을 거쳐 인두의 기능시 내부에 생성되는 압력의 연속적인 압력분포를 추정할 수 있었다. 즉 인두내의압력에 대한 형상의 변형을 관찰하여 각 단면에서의 단면적을 산출하고 이를 실제의 CT영상자료와 비교하여 최적화 고장을 거쳐 각 부분에서의 추정 압력구배를 구하였다. 모델 시뮬레이션 결과 추정된 압력구배는 10-55 mmHg범위에 분포되어 있으며 전체 인두부 가운데 상부의 4레벨의 압력분포는 아부의 그것과 다른 형태를 보이는 것으로 나타났다. 이러한 인두의 생체역학모델은 인두기능장애를 가진 환자군에 적용하여 비교 분석할 경우 임상자료로서 유용할 것으로 사료된다.

• 한국가시화정보학회지
• /
• 제16권2호
• /
• pp.31-37
• /
• 2018

Ischemic mitral regurgitation (IMR) is the primary mitral valve (MV) pathology in the aftermath of myocardial infarction as a consequence of regional left ventricular (LV) remodeling. We investigated the effect of asymmetric papillary muscle (PM) displacement and annular dilation on IMR development. Virtual MV modeling was performed to create a normal human MV. Asymmetric PM displacement, asymmetric annular dilation, and the combination of these two pathologic characteristics were modeled. Dynamic finite element evaluation of MV function was performed across the complete cardiac cycle for the normal and three different IMR MV models. While the normal MV demonstrated complete leaflet coaptation, each pathologic MV model clearly revealed deteriorated leaflet coaptation and abnormal stress distributions. The pathologic MV model having both asymmetric PM displacement and annular dilation showed the worst leaflet malcoaptation. Simulation-based biomechanical evaluation of post-ischemic LV remodeling provides an excellent tool to better understand the pathophysiologic mechanism of IMR development.

• 산업경영시스템학회지
• /
• 제23권60호
• /
• pp.37-46
• /
• 2000

A biomechanical model of lower extremity in seated postures was developed to assess muscular activities of lower extremity involved in a variety of foot pedal operations. The model incorporated four rigid body segments with the twenty-four muscles to represent lower extremity This study deals with quasi-static movement to investigate dynamic movement effect in seated foot operation. It is found that optimization method which has been used for modeling the articulated body segments does not predict the forces generated from biarticular muscles and antagonistic muscles reasonably. So, the revised nonlinear optimization scheme was employed to consider the synergistic effects of biarticular muscles and the antagonistic muscle effects from the stabilization of the joint. For the model validation, three male subjects performed the experiments in which EMG activities of the nine lower extremity muscles were measured. Predicted muscle forces were compared with the corresponding EMG amplitudes and it showed no statistical difference. For the selection of optimal seated posture, a physiological meaningful criterion was developed for muscular load sharing developed. For exertion levels, the transition point of type F motor unit of each muscle is inferred by analyzing the electromyogram at the seated postures. Also, for predetermined seated foot operations exertion levels, the recruitment pattern is identified in the continuous exertion, by analyzing the electromyogram changes due to the accumulated muscle fatigue.

• Clinics in Shoulder and Elbow
• /
• 제26권2호
• /
• pp.126-130
• /
• 2023

Background: Arm swing plays a role in gait by accommodating forward movement through trunk balance. This study evaluates the biomechanical characteristics of arm swing during gait. Methods: The study performed computational musculoskeletal modeling based on motion tracking in 15 participants without musculoskeletal or gait disorder. A three-dimensional (3D) motion tracking system using three Azure Kinect (Microsoft) modules was used to obtain information in the 3D location of shoulder and elbow joints. Computational modeling using AnyBody Modeling System was performed to calculate the joint moment and range of motion (ROM) during arm swing. Results: Mean ROM of the dominant elbow was 29.7°±10.2° and 14.2°±3.2° in flexion-extension and pronation-supination, respectively. Mean joint moment of the dominant elbow was 56.4±12.7 Nm, 25.6±5.2 Nm, and 19.8±4.6 Nm in flexion-extension, rotation, and abduction-adduction, respectively. Conclusions: The elbow bears the load created by gravity and muscle contracture in dynamic arm swing movement.

• 대한의용생체공학회:의공학회지
• /
• 제24권6호
• /
• pp.515-522
• /
• 2003

인두는 구강과 식도, 비강과 폐의 중간에서 능동적으로 구강을 통해 섭취되는 음식물과 비강을 통해 흡입되는 공기의 통로역할을 하는 주요한 기관이다. 본 연구는 유한요소기법을 이용한 인두의 3차원 구조의 재구성 과정을 거쳐 인두의 생체역학모델을 구현하였으며, 연하곤란환자의 인두근육의 주요부분에 대한 구조적 변형특성을 3가지로 분류하여 유한요소기법을 이용하여 인두내의 압력에 대한 형상의 변형을 관찰 후 최적화 과정을 거쳐 각 부분에서의 추정 압력 구배를 측정하여 연하과정에서 내부에 생성되는 압력의 연속적인 압력분포를 추정하였다. CT에 의한 인두의 변형 형상을 추정하여 임의 압력에 의한 인두구조의 변형 형상을 유한요소 해석에 의해 계산한 후 비교하여 실제 인두강 내에 형성되는 압력을 추정하였다. 재료적 특성은 인두의 기능이상 시 근조직경화가 발생, 즉 stiffness 가 증가하는 것으로 가정하여 응력-변형률 관계에 있어서 각각 $25\%,\;50\%,\;75\%$씩 증가시켜 분석하였다. 이러한 인두의 생체역학모델은 인두기능장애를 가진 환자의 치료 계획 수립에 도움이 되는 유용한 자료를 제공 할 것으로 생각된다.

• 한국생활과학회지
• /
• 제24권4호
• /
• pp.555-569
• /
• 2015

During a design process of a protective equipment for sports activities, minimizing movement restrictions is important for enhancing its functions particularly for protection. This study presents a three-dimensional(3D) modeling methodology for designing baseball catcher's leg guards that will allow maximum possible performance, while providing necessary protection. 3D scanning is performed on three positions frequently used by a catcher during the course of a game by putting markings on the subject's legs at 3cm intervals : a standing, a half squat with knees bent to 90 degrees and 120 degrees of knee flexion. Using data obtained from the 3D scan, we analyzed the changes in skin length, radii of curvatures, and cross-sectional shapes, depending on the degree of knee flexion. The results of the analysis were used to decide an on the ideal segmentation of the leg guards by modeling posture. Knee flexions to 90 degrees and to $120^{\circ}$ induced lengthwise extensions than a standing. In particular, the vertical length from the center of the leg increases to a substantially higher degree when compared to those increased from the inner and the outer side of the leg. The degree of extension is varied by positions. Therefore, the leg guards are segmented at points where the rate of increase changed. It resulted in a three-part segmentation of the leg guards at the thigh, the knee, and the shin. Since the 120 degree knee-flexion posture can accommodate other positions as well, the related 3D data are used for modeling Leg Guard (A) with the loft method. At the same time, Leg Guard (B) was modeled with two-part segmentation without separating the knee and the shin as in existing products. A biomechanical analysis of the new design is performed by simulating a 3D dynamic analysis. The analysis revealed that the three-part type (A) leg guards required less energy from the human body than the two-part type (B).