• Journal of Korean Institute of Industrial Engineers
• /
• v.26 no.2
• /
• pp.110-116
• /
• 2000

The soft drink deliveries are made for a broad line of soft drink products by using a hand truck and the backpack mode of carriage. The workers usually deliver the beverages by backpack mode of carriage, because they feel safe with such a carrying method in stairways. In this study, the physiological workload of backpack carrying was investigated, especially focused on the effects of weight of load and carrying by the stairway. A laboratory experiment was conducted to measure heart rate and oxygen uptake during backpack carrying tasks, and an ergonomic guideline was proposed for such type of task based on the results of the experiment. Eight healthy male subjects performed the backpack carrying of 40kg and 60kg, (1) on the level ground, (2) upstairs and (3) downstairs. The result showed that the stairways caused the increased physiological cost, and that a carrying load of 60kg required significantly higher physiological cost as compared to carrying 40kg. Although backpack carrying has some advantages in the biomechanical aspect, it should be advised to carry a load of less than 40kg, since the task requires a very high physiological cost. During backpack carrying, it is also recommended for a delivery person to make more trips with a light load rather than to make less trips with a heavier load at one trip.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.2 s.245
• /
• pp.194-201
• /
• 2006

Gait analysis is essential to identify accurate cause and knee condition from patients who display abnormal walking. Traditional linear tools can, however, mask the true structure of motor variability, since biomechanical data from a few strides during the gait have limitation to understanding the system. Therefore, it is necessary to propose a more precise dynamic method. The chaos analysis, a nonlinear technique, focuses on understand how variations in the gait pattern change over time. Eight healthy eight subjects walked on a treadmill for 100 seconds at 60 Hz. Three dimensional walking kinematic data were obtained using two cameras and KWON3D motion analyzer. The largest Lyapunov exponent from the measured knee angular displacement time series was calculated to quantify local stability. This study quantified the variability present in time series generated from gait parameter via chaos analysis. Knee flexion-extension patterns were found to be chaotic. The proposed Lyapunov exponent can be used in rehabilitation and diagnosis of recoverable patients.

• Proceedings of the KOSOMBE Conference
• /
• v.1997 no.11
• /
• pp.280-283
• /
• 1997

Human cervical spine has to protect the neural components and vascular structures. Also, it must have the flexibility afforded by an extensive range of motion to integrate the head with the body and environment. Because of these two-sided features, human cervical spine has very complicated shapes and their injury mechanisms are not fully understood yet. We have developed analytical model of human CS by using the finite element method. The model has been verified with in vivo and in vitro experimental results. From the qualitative analysis of simulation results, we were able to explain some of the fundamental mechanisms of neck pain. Further more, this FE model of human CS can be used as an analytical tool or biomechanical design of the clinical device and safety restraints.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.23 no.4
• /
• pp.359-371
• /
• 2007

Recently, many studies were reported accurate analysis of facemask effect due to the development of the personal computers and computer programs. The aim of this study is appropriate protraction direction of facemask using finite element study with computer aided design and computer aided measurement. The construction of the three dimensional FEM was based on the computer tomography(CT) scans of 13.5 year-old male subject. Protraction force of 500 mg was applied at 0, 30, 60 and 90 degrees downwards to the Frankfort horizontal plane, and maxillary displacement and stress distribution were measured. When 60 degree force was applied, it showed forward movement of premolar roots area and downward movement of anterior nasomaxillary area, and others showed clockwise rotation movement of the nasomaxillary complex. Finally, we can produce the protraction of maxillary bone without rotation of maxilla about 60 degrees.

• Steel and Composite Structures
• /
• v.37 no.2
• /
• pp.253-258
• /
• 2020

Vibration response in a sandwich plate with a nanocompiste core covered by magnetic layer is presented. The core is armed by functionalyy graded-carbon nanotubes (FG-CNTs) where the Mori-Tanaka law is utilized assuming agglomeration effects. The structure plate is located on elastic medium simulated by Pasternak model. The governing equations are derived based on Mindlin theory and Hamilton's principle. Utilizing diffrential quadrature method (DQM), the frequency of the structure is calculated and the effects of magnetic layer, volume percent and agglomeration of CNTs, elastic medium and geometrical parameters of structure are shown on the frequency of system. Results indicate that with considering magnetic layer, the frequency of structure is increased.

• Biomaterials and Biomechanics in Bioengineering
• /
• v.3 no.2
• /
• pp.71-84
• /
• 2016

The finite element method is wide used in simulation in the biomechanical structures, but a lack of studies concerning finite element mesh quality in biomechanics is a reality. The present study intends to analyze the importance of the mesh quality in the finite element model results from humeral structure. A sensitivity analysis of finite element models (FEM) is presented for the humeral bone and cartilage structures. The geometry of bone and cartilage was acquired from CT scan and geometry reconstructed. The study includes 54 models from same bone geometry, with different mesh densities, constructed with tetrahedral linear elements. A finite element simulation representing the glenohumeral-joint reaction force applied on the humerus during $90^{\circ}$ abduction, with external load as the critical condition. Results from the finite element models suggest a mesh with 1.5 mm, 0.8 mm and 0.6 mm as suitable mesh sizes for cortical bone, trabecular bone and humeral cartilage, respectively. Relatively to the higher minimum principal strains are located at the proximal humerus diaphysis, and its highest value is found at the trabecular bone neck. The present study indicates the minimum mesh size in the finite element analyses in humeral structure. The cortical and trabecular bone, as well as cartilage, may not be correctly represented by meshes of the same size. The strain results presented the critical regions during the $90^{\circ}$ abduction.

• Restorative Dentistry and Endodontics
• /
• v.40 no.2
• /
• pp.161-165
• /
• 2015

Three-dimensional (3D) reconstruction of cone-beam computed tomography (CBCT) scans appears to be a valuable method for assessing pulp canal configuration. The aim of this report is to describe endodontic treatment of a mandibular second premolar with aberrant pulp canal morphology detected by CBCT and confirmed by 3D modeling. An accessory canal was suspected during endodontic treatment of the mandibular left second premolar in a 21 year old woman with a chief complaint of pulsating pain. Axial cross-sectional CBCT scans revealed that the pulp canal divided into mesiobuccal, lingual, and buccal canals in the middle third and ended as four separate foramina. 3D modeling confirmed the anomalous configuration of the fused root with a deep lingual groove. Endodontic treatment of the tooth was completed in two appointments. The root canals were obturated using lateral compaction of gutta-percha and root canal sealer. The tooth remained asymptomatic and did not develop periapical pathology until 12 months postoperatively. CBCT and 3D modeling enable preoperative evaluation of aberrant root canal systems and facilitate endodontic treatment.

• Journal of the Korean Arthroscopy Society
• /
• v.13 no.2
• /
• pp.97-104
• /
• 2009

Optimal treatment of the torn anterior cruciate ligament (ACL) remains controversial. The complexity of surgically reproducing the natural biomechanical and anatomical function of the ACL has led to a diversity of reconstructive procedures. Controversy continues to exist regarding the best reconstructive procedure for the ACL deficient knee, but currently, there is no ideal method. Because of the increased frequency of ACL injury and the functional impairment resulting from that, the role of mechanoreceptors in the ACL recently has attracted considerable attention. Proper reconstruction of the ruptured ACL does not always have good results. Success after operation may depend not only on the mechanical stability but also on the quality of recovery of proprioception. It is well known that most ACL are ruptured in proximal half and most mechanoreceptors have been reported to be located in the subsynovial layer and near the tibial insertion of the ACL. Expected roles of tibial remnant is to enhance the revascularization and cellular proliferation of the graft, to preserve proprioceptive function, and to be able to acquire anatomical placement of the graft without roof impingement. The remnant of the ruptured ACL has been removed to clearly visualize the ACL footprint or decrease the risk of impingement and Cyclops lesion in most current techniques for ACL reconstruction. Therefore it seems reasonable to assume that preserving the tibial remnant as much as possible as a source of reinnervation, if technically possible without causing impingement, would be of potential benefit to the patient. In addition, it will facilitate the vascular ingrowth and ligamentization of the grafted ACL.

• The Journal of Korean Society for Neurotherapy
• /
• v.22 no.3
• /
• pp.43-48
• /
• 2018

Purpose The purpose of this study is to identify the prevalence, risk factors, characteristics, and interventions of hip joint problems in children with cerebral palsy, and to be able to serve as leverage for early detection, prevention, and function recovery. Method The electronic journal site was searched by the search terms "cerebral palsy", "hip joint", "hip joint dislocation", we analyzed and descript the cited articles from domestic and foreign papers in Pubmed 9, Science Direct 7, and K RISS analysis and analysis. Results Children with cerebral palsy showed the different prevalence according to their disability type, severity, and functional level, and we knew that abnormal neuromuscular control, stiffness, and biomechanical changes could be risk factors. Migration Index, Acetabolum Index, Neck shaft angle using by radiography and passive ROM test, special tests were available for the diagnosis and evaluation of the hip joint. Combination of physical therapy and orthopedic surgery was very important intervention, and complementary alternative therapy, orthosis, and postural assistant are effective. Conclusion We suggested that early detection and prevention is the most important periodic examination and that a multidisciplinary approach is a major factor in intervention.

• Korean Journal of Applied Biomechanics
• /
• v.29 no.3
• /
• pp.137-143
• /
• 2019

Objective: Ligament laxity and hypotonia are characteristics of Down syndrome patients. The aim of this study was to compare the landing pattern between Down syndrome patients and typically developing subjects. To compare the landing pattern, variables related to ligament laxity and hypotonia i.e. vertical stiffness and lower extremities kinematics were investigated. Method: Five subjects with Down syndrome (age: $14.6{\pm}1.8years$, mass: $47.6{\pm}6.94kg$, height: $147.9{\pm}6.0cm$) and six able-bodied subjects (age: $13.2{\pm}0.4years$, mass: $54.7{\pm}6.7kg$, height: $160.1{\pm}9.8cm$) participated in this study. Results: The vertical displacement of the center of mass, vertical reaction force, leg stiffness and range of ankle angle range among Down syndrome patients were significantly different than typically developing group. The youth with Down's syndrome appeared to receive greater vertical impact force at landing than normal youth. Conclusion: The differences in the biomechanical characteristics suggest the delay in motor development among Down syndrome patients and an increased risk of injury to the lower extremity during movement execution such as drop landing.