• Environmental Engineering Research
• /
• v.19 no.2
• /
• pp.145-149
• /
• 2014

Arsenic (As) is one of the heavy metals which causes acute bio-toxicity even at low concentration and has disastrous effect on environment. In some countries, As contamination has become alarming and increasing day by day as consequences of unsustainable management practices. Many existing physical, chemical and biological processes for As removal from water system are not feasible due to techno-economic limitations. The present study highlights the scope of biological strategy for As removal through phytoextraction. Arsenic uptake and accumulation in the biomass of three plant species and their As tolerance abilities have been investigated to develop an efficient phytoextraction system in combination of these plant species. Three non-crop plant species, Pteris vittata; Mimosa pudica, and Eichhornia crassipus were treated with 0-200 mg/L As in liquid nutrient solution for 14 days. P. vittata accumulated total 9,082.2 mg (8,223 mg in fronds) As/kg biomass and Eichhornia total 6,969 mg (4,517 mg in fronds)/kg biomass at 200 mg/L As concentration, respectively. Bioaccumulation factor (BF) and translocation factor (TF) were estimated to differentiate between excluders, accumulators and accumulation in above ground biomass. Pteris and Eichhornia have highest BF (67 and 17) and TF (64 and 3), respectively. In contrast, Mimosa accumulated up to 174 mg As/kg plant biomass which is low in comparison with other two plants, and both BF and TF were ${\leq}1$. This study reveals that Pteris and Eichhornia are As hyperaccumulator, and potential candidates for As removal from water system.

• Analytical Science and Technology
• /
• v.30 no.4
• /
• pp.174-181
• /
• 2017

Bio-liquid is a liquid by-product of the hydrothermal carbonization (HTC) reaction, converting wet biomass into solid hydrochar, bio-liquid, and bio-gas. Since bio-liquid contains various compounds, it requires efficient sampling method to extract the target compounds from bio-liquid. In this research, fatty acid methyl ester (FAME) in bio-liquid was extracted based on hollow fiber supported liquid phase microextraction (HF-LPME) and determined by Gas Chromatography-Flame Ionization Detector (GC-FID) and Gas Chromatography/Mass Spectrometry (GC/MS). The well-known major components of biodiesel, including methyl myristate, palmitate, methyl palmitoleate, methyl stearate, methyl oleate, and methyl linoleate had been selected as standard materials for FAME analysis using HF-LPME. Physicochemical properties of bio-liquid was measured that the acidity was 3.30 (${\pm}0.01$) and the moisture content was 100.84 (${\pm}3.02$)%. The optimization of HF-LPME method had been investigated by varying the experimental parameters such as extraction solvent, extraction time, stirring speed, and the length of HF at the fixed concentration of NaCl salt. As a result, optimal conditions of HF-LPME for FAMEs were; n-octanol for extraction solvent, 30 min for extraction time, 1200 rpm for stirring speed, 20 mm for the HF length, and 0.5 w/v% for the concentration of NaCl. Validation of HF-LPME was performed with limit of detection (LOD), limit of quantitation (LOQ), dynamic range, reproducibility, and recovery. The results obtained from this study indicated that HF-LPME was suitable for the preconcentration method and the quantitative analysis to characterize FAMEs in bio-liquid generated from food waste via HTC reaction.

• Korean Journal of Environmental Agriculture
• /
• v.36 no.4
• /
• pp.223-229
• /
• 2017

BACKGROUND: Tillage systems and fertilization play an important role in crop growth and soil improvement. This study was conducted to determine the effects of tillage and fertilization on the microbial biomass C and dehydrogenase activity of soils in a field under cultivation of soybean. METHODS AND RESULTS: An experimental plot, located in the temperate climate zone, was composed of two main sectors that were no-tillage (NT) and conventional tillage (CT), and they were subdivided into four plots, respectively, in accordance with types of fertilizers (non fertilizer, chemical fertilizer, hairy vetch, and liquid pig manure). Microbial biomass C and dehydrogenase activity were evaluated from May to July in 2016. The microbial biomass C and dehydrogenase activity of NT soils were significantly higher than those of CT in all fertilizer treatments, and they were further increased in hairy vetch treatment than the other fertilizer treatments in both NT and CT. The dehydrogenase activity was closely related to microbial biomass C. CONCLUSION: It is concluded that application of green manure combined with no-tillage can provide viable management practices for enhancing microbial properties of soil.

• Clean Technology
• /
• v.29 no.3
• /
• pp.193-199
• /
• 2023

Biomass has been used to secure renewable energy certificates (REC) in domestic and overseas coal-fired power plants. In recent years, biofuel has been diversified from traditional wood pellets to non-woody biomass. Non-woody biomass has a higher content of alkaline metals such as K and Na than wood-based biomass, resulting in a lower melting point and an increase in slagging on boiler tubes, which reduces boiler efficiency. This study analyzed the effect of kaolin, an additive commonly used to increase melting points, on biomass co-firing to coal through thermochemical equilibrium calculations. In a previous experiment on biomass co-firing to coal conducted at 80 kW_th, it was interpreted that the use of kaolin actually increased the amount of fouling. In this study, analysis showed that when kaolin was added, aluminosilicate compounds were generated due to Al₂O₃, which is abundant in coal, and mullite was formed. Thus, it was confirmed that the amount of slag increased when more kaolin was used. Further analysis was conducted by increasing the biomass co-firing rate from 0% to 100% at 10% intervals, and the results showed non-linear liquid slag generation. As a result, it was found that the least amount of liquid slag was generated when the biomass co-firing rate was between 50 and 60%. The phase diagram analysis showed that high melting point compounds such as leucite and feldspar were most abundantly generated under these conditions.

• Transactions of the Korean hydrogen and new energy society
• /
• v.18 no.1
• /
• pp.85-94
• /
• 2007

Rice straw, produced as an agricultural by-product, is usable biomass as fuels if depolymerized to monomer unit, because the chemical structure are similar to high octane materials found in gasoline. In this study, parameters of thermochemical degradation by solvolysis reaction of rice straw such as the effect of reaction temperature, reaction time and type of solvent on conversion yield and degradation products were investigated. It was found that the effectiveness of the solvent on the solvolysis reaction was as follows; acetone>cresol>butanol. When acetone was used as a solvent, the highest rice straw conversion was observed to be 91.5% at $500^{\circ}C$, 40 min. Combustion heating value of liquid products from thermochemical conversion processes was in the range of 7,380 cal/g. The energy yield and mass yield in acetone-solvolysis of rice straw was as high as 69.0% and 38.2 g-oil/100g-raw material after 40 min of reaction at $350^{\circ}C$. Various aliphatic and aromatic compounds were detected in the rice straw solvolysis products. The major components of the solvolysis products, that could be used as fuel, were 4-methyl-2-pentanone, 3,5,5-trimethyl-2-cyclopentan-1-one as ketones.

• Journal of Energy Engineering
• /
• v.26 no.1
• /
• pp.76-83
• /
• 2017

In this paper, the carbon resources recycling of the overview of coffee waste generation in Vietnam. Since few years, there has been a significant research studies was done in the areas of coffee waste generation areas and also waste water generation from coffee production. The coffee residue (solid) and waste water (liquid) both are caused the underground water contamination and also soil contamination. These residues contain high organic matter and acid content leads to the severe threat to environment. In second stage of coffee production process, the major solid residue was generated. Various solid residues such as spent coffee grounds, defective coffee beans and coffee husks) pose several environmental concerns and specific problems associated with each type of residue. Due to the unlimited usage of coffee, the waste generation is high. At the same time, some researchers have been investigated the spent coffee wastes are the valuable sources for various valuable compounds. Biodiesel or biomass productions from coffee waste residues are the best available utilization method for preventing the landfill problems of coffee waste residues.

• Korean Journal of Medicinal Crop Science
• /
• v.20 no.6
• /
• pp.479-486
• /
• 2012

The production of adventitious roots derived from root explant of Echinacea angustifolia and its secondary metabolite content were assessed in different types and levels of auxin. The induction of adventitious roots from root explant cultured in Murashige and Skoog solid medium supplemented with 1.0 mg/L indole -3-butyric acid (IBA) attained highest as 20.87 mg fresh weight and 3.07 mg dry weight per culture but root suspension culture at the same concentration of IBA enhanced biomass production as 3.07 g fresh weight and 0.38 g per culture after 4 weeks in culture. 3.0 mg/L ${\alpha}$-naphthalene acetic acid (NAA) treatment had similar effect on root biomass production as 3.07 g fresh weight and 0.38 g per culture with liquid suspension culture, whereas adventitious roots exposed to over 3.0-5.0 mg/L IBA or 5.0 mg/L NAA were less responsive by reducing the number of adventitious roots and/or changing root morphology such as short and thick. The content of secondary metabolites such as phenolic, flavonoids and total caffeic acid in adventitious roots cultured on MS medium supplemented with 1.0 mg/L IBA were attained highest as 27.20, 9.60. 10.67 mg/g dry weight, respectively. Overall, the best production of root biomass and secondary metabolites were given by 1.0 mg/L IBA.

• Journal of the Korean Wood Science and Technology
• /
• v.33 no.5 s.133
• /
• pp.92-98
• /
• 2005

This study was performed to get the basic information concerned to the optimum culture condition of Inonotus obliquus. Several solid media, PDA, MEA and Czapek-Dox, and three liquid media were adopted for the in vitro cultivation. Some main features of the fungal morphological characteristics under cultivation conditions were observed and described. Preliminary results showed that appearance of the mycelial mat, hyphal size and substrate pigmentation differed according to the media. The PDA medium was the most favorable substrate for the growth on solid culture, followed by MEA and Czapek-Dox media. Concerned to the addition of amino acids, 5 amino acids, such as alanine, alginine, isoleucine, leucine and threonine, enhanced to the mycelial growth. Isoleucine was shown the best fungal growth. An important morphological hyphal structure for the fungus, the setae, was found in abundance and diverse its shape and size. In liquid culture, fresh potato broth was the best growth stimulant of the fungus, followed by Malt extract and potato broth. Addition of yeast extract to the liquid media had improved the biomass, but not laccase production.

• Korean Chemical Engineering Research
• /
• v.54 no.1
• /
• pp.135-139
• /
• 2016

We developed a liquid-liquid extraction method using an inorganic salt to dramatically improve the recovery efficiency of the anticancer agent paclitaxel from plant cell cultures. As a result of liquid-liquid extraction using a diverse types of inorganic salt (NaCl, KCl, $K_2HPO_4$, $NaH_2PO_4$, $NaH_2PO_4{\cdot}2H_2O$), NaCl gave the highest yield (~96%) and lowest partition coefficient (0.053) of paclitaxel. The optimal NaCl/solvent ratio, methylene chloride/MeOH ratio, and pure paclitaxel content for liquid-liquid extraction using NaCl were 1% (w/v), 26% (v/v), and 0.066% (w/v), respectively. Under the optimal conditions developed in the present method, most of the paclitaxel (~96%) was recovered from biomass by a single extraction step. In addition, this method facilitated 3-fold higher recovery efficiency of paclitaxel in a shorter extraction number than the conventional liquid-liquid extraction method.

• Korean Chemical Engineering Research
• /
• v.53 no.4
• /
• pp.489-495
• /
• 2015

A fundamental mathematical model for mass transfer processes has been used to understand the air pollution control process in biotrickling filtration and to evaluate the mass transfer coefficients of gas/liquid (trickling liquid), gas/solid (biomass) and liquid/solid based upon experimental results and mathematical model calculations for selected operating conditions. The mass transfer models for the utilization of the steady-state mass balance for gas/liquid, and dynamic mass balance model for gas/solid & liquid/solid in biotrickling filters were established and discussed. The mass transfer model considered the reactor to comprise finite sections, for each of which dynamic mass balances for gas/solid and liquid/solid system were solved by numerical analysis code (numerical iteration). To determine the mass transfer coefficients ($K_La$) of gas/liquid, gas/solid & liquid/solid in a biotrickling filter, the calculation results based upon mass balance equation was optimized to coincide with the experimental results for the selected operating conditions. Finally, this study contributed the development of experimental methods and discussed the mathematical model to determine the mass transfer coefficients in a biotrickling filtration for air pollution control.