• Korean Chemical Engineering Research
• /
• v.51 no.1
• /
• pp.106-110
• /
• 2013

In this work, we investigated 20 kinds of ionic liquids as catalyst during the hydrolysis of Saccharina japonica. Three kinds of ionic liquid, 1-ethyl-3-methylimidazolium tetrafluoroborate, n-butyl-4-methylpyridinium tetrafluoroborate, and n-methylmorpholine [$HSO_4$], are selected, and then investigated the effect of reaction temperature, catalyst amount and reaction time. The hydrolysis of S. japonica was increased by the increasing of reaction temperature and ionic liquid amount. Also, the hydrolysis presented the linear increase by the increasing of reaction time. After 90 min of reaction, the concentrations of reducing sugar of 1-ethyl-3-methylimidazolium tetrafluoroborate, n-butyl-4-methylpyridinium tetrafluoroborate, and n-methylmorpholine [$HSO_4$] are reached to 6.2 g/L, 6.4 g/L and 6.0 g/L, respectively. As an overall result, we obtained the possibility of hydrolysis of marine biomass using ionic liquids.

• Applied Chemistry for Engineering
• /
• v.19 no.6
• /
• pp.617-623
• /
• 2008

GTL (gas-to-liquid) fuel produced by the Fischer-Tropsch reaction of carbon monoxide (CO) and hydrogen ($H_2$) is expected to be one of the environmental friendly biomass based alternatives and blended to petrodiesel. In this study, the characteristic of the fuel was analyzed by its concentration differences after blending petrodiesel in domestic market with different amounts of GTL fuel which produced from Shell. Gas chromatography shows that GTL fuel consists of longer paraffin chain than common diesel. GTL fuel showed a high flash point, distillation, kinematic viscosity, and derived cetane number. In addition, GTL fuel showed lower lubricity due to low sulfur content.

• Mycobiology
• /
• v.38 no.1
• /
• pp.39-45
• /
• 2010

White rot, which is caused by Sclerotium cepivorum, is a lethal disease affecting green onions. Three different types of nanosilver liquid (WA-CV-WA13B, WA-AT-WB13R, and WA-PR-WB13R) were tested in several different concentrations on three types of media to assess their antifungal activities. Results from in vitro experiments showed that all three of the nano-silver liquids had more than 90% inhibition rates at a concentration of 7 ppm. Greenhouse experiments revealed that all of the nano-silver liquids increased biomass and dry weights, and there were minimal changes in the population of various bacteria and fungi from the soil of greenhouse-cultivated green onions. In addition, a soil chemical analysis showed that there were minimal changes in soil composition.

• Transactions of the Korean hydrogen and new energy society
• /
• v.19 no.1
• /
• pp.56-63
• /
• 2008

In this study, thermochemical degradation of hemicellulose by Acetone-Solvolysis, the effects of reaction temperature, conversion yield, degradation properties and degradation products were investigated. Experiments were performed in a tube reactor by varying reaction temperature from $200{\circ}C$ to $400{\circ}C$ at 40 min of reaction time. The liquid products from pyrolysis-liquefaction of hemicellulose contained various kinds of ketones. ketones, as 4-methyl-3-penten-2-one, 3-methylene-2-pentanone, 22,6-dimethyl-2, 5-heptadien-4-one, 4-methyl-2-pentanone, 5-methyl-2-hexanone, 3,5,5-trimethyl-2-cyclohexen-1-one, and bezenes. as 1,4-dimethylbenzene, 1-methyl-2-(1-methylethyl)-benzene, 1,4-dimethyl-2-(2-methylpropyl)benzene, 4-secbutyl-ethyl benzene, could be used as high-octane-value fuels and fuel additives. Combustion heating value of liquid products from thermochemical conversion processes of hemicellulose was in the range of $6,680{\sim}7,170cal/g$. After 40min of reaction at $400{\circ}C$ in Acetone-Solvolysis of hemicellulose, the energy yield and mass yield was as high as 72.2% and 41.2g oil/100g raw material, respectively.

• 한국생물공학회:학술대회논문집
• /
• 2005.10a
• /
• pp.566-569
• /
• 2005

A novel purification method was developed for producing homoharringtonine from Cephalotaxus koreana, to guarantee high purity and yield. Our simple, efficient procedure for isolating and purifying homoharringtonine from C. koreanabiomass consisted of solvent extraction, synthetic adsorbent treatment, low-pressure chromatography, followed by high performance liquid chromatography (HPLC). The use of active clay treatment and silica gel low-pressure chromatography in the pre-purification process allowed for the rapid, efficient separation of homoharringtonine from interfering compounds and dramatically increased the yield and purity of crude homoharringtonine for high-performance liquid chromatography (HPLC) purification steps compared with alternative processes. Homoharringtonine could be obtained simply with high yield and purity from biomass using this purification method, while minimizing solvent use and the scale and complexity of HPLC operations for homoharringtonine purification. Purified homoharringtonine was identified and characterized.

• Transactions of the Korean hydrogen and new energy society
• /
• v.15 no.4
• /
• pp.333-340
• /
• 2004

In this study, thermochemical degradation by pyrolysis-liquefaction of cellulose, the effects of reaction time, reaction temperature, conversion yield, degradation properties and degradation products were investigated . Experiments were performed in a tube reactor by varying reaction time from 20 to 80 min at $200{\sim}500^\circ{C}$. Combustion heating value of liquid products from thermochemical conversion processes of cellulose was in the range of 6,920~6,960cal/g. After 40min of reaction at $400^\circ{C}$ in pyrolysis-liquefaction of cellulose, the energy yield and mass yield was as high as 54.3% and 34.0g oil/100g raw material, respectively. The liquid products from pyrolysis-liquefaction of cellulose contained various kinds of ketones, phenols and furans. ketones and furans could be used as high-octane-value fuels and fuel additives. However, phenols are not valuable as fuels.

• Transactions of the Korean hydrogen and new energy society
• /
• v.31 no.2
• /
• pp.223-233
• /
• 2020

Fast pyrolysis is one of the most promising technologies for converting biomass to liquid fuels. Pyrolysis bio-oil can replace petroleum-based fuels used in various thermal conversion devices. However, pyrolysis bio-oil is completely different from petroleum fuels. Therefore, in order to successfully use pyrolysis bio-oil, it is necessary to understand the fuel characteristics of pyrolysis bio-oil. This paper focuses on fuel characteristics and upgrading methods of pyrolysis bio-oil and discusses how these fuel characteristics can be applied to the use of pyrolysis bio-oils. In addition, the fuel quality standards of fast pyrolysis bio-oil were examined.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.3
• /
• pp.344-354
• /
• 2015

To investigate the effects of ionic liquid pretreatment on biomass, giant miscanthus was treated with 1-ethyl-3-methylimidazolium acetate ([Emim][OAc]) and 1-butyl-3-methylimidazolium acetate ([Bmim][OAc]) at three temperature conditions ($90^{\circ}C$, $110^{\circ}C$, and $130^{\circ}C$). As temperature condition increased, yield of the cellulose-rich product (CP) was reduced from 87.2% to 67.6%, while yield of the ionic liquid lignin (ILL) increased from 2.2% to 9.9%. Compared to the ILL, CP had lower carbon contents and higher oxygen contents. Enzymatic hydrolysis of CPs showed that conversion ratio of CP treated with [Emim][OAc] at $110^{\circ}C$ was 56.7%, the highest digestibility. Thermogravimetric analysis indicated that the maximum degradation rate decreased as temperature condition increased. In addition, maximum degradation temperature of ILL treated with [Emim][OAc] ranged from 274 to $279^{\circ}C$ which was lower than that of ILL treated with [Bmim][OAc]. Analytical date for ${\beta}$-O-4 linkage frequency in the ILL revealed that ${\beta}$-O-4 linkage frequency in the ILL decreased as the temperature rose. Furthermore, the highest S/G ratio of the ILL was determined to ca. 1.2 obtained from [Bmim][OAc] treatment at $110^{\circ}C$.

• Solar Energy
• /
• v.18 no.3
• /
• pp.161-167
• /
• 1998

The effects of some additives(black liquor, wood and lignin) on the conversion of coal and product were investigated in the lab-scale, high pressure reacting system around $375^{\circ}C$. The addition of lignin to coal during liquefaction significantly increased the depolymerization of coal and enhanced the quality of the liquid products. Coprocessing of wood and coal at $400^{\circ}C$ increased yield of liquid product about 8%, but higher temperature above $400^{\circ}C$ reduced liquid product due to increase of gas products. The addition of black liquor resulted in an enhancement in coal conversion yields, however, the observed increase is lower than that obtained in the presence of NaOH because lignin present in black liquor is not very effective due to the $OH^-$ presence.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.2
• /
• pp.145-162
• /
• 2019

This study aimed to increase the sugar and ethanol yield from the mengkuang plant biomass through biological and liquid hot water (LHW) pretreatment and their combination. The results showed that biological pretreatments with 5% inoculum of the fungus Trametes versicolor resulted in the highest alpha cellulose content incubated for 30 days, and 10% inoculum resulted in the lowest lignin content. LHW pretreatment decreased the hemicellulose content of pulps from 10.17% to 9.99%. T. versicolor altered the structure of the mengkuang pulp by degrading the lignin and lignocellulose matrix. The resulting delignification and cellulose degradation facilitate the hydrolysis of cellulose into sugars. The alpha cellulose content after biological-LHW pretreatment was higher (78.99%) compared to LHW-biological pretreatment (76.85%). Scanning electron microscopy analysis showed that biological-LHW combinated treatment degrades the cell wall structures. The ethanol yield for biological-LHW pretreated sample was observed 43.86% (13.11 g/L ethanol by weight of the substrate, which is much higher than that of LHW-biological pretreatment (34.02%; 9.097 g/L). The highest reducing sugar content about 45.10% was observed with a resulting ethanol content of 15.5 g/L at LHW pretreatment temperature of $180^{\circ}C$ for 30 min.