• Journal of Energy Engineering
• /
• v.21 no.4
• /
• pp.373-377
• /
• 2012

Among the fossil fuels, the brown coal is a great deal of resources. However, it is hardly used due to the high moisture content and low calorific value. It has both the week points such as spontaneous combustion and high volatile content and the strong points such as the low-sulfur and low ash content. If we overcome these week points, the using amount of brown coal would be increased. Also, it is well known that biomass is one of the important primary renewable energy sources because of carbon neutral energy. Furthermore, the utilization of biomass has been more and more concerned with the depletion of fossil fuel sources as well as the global warming issues. Combustion and thermal decomposition of biomass is one of the more promising techniques among all alternatives proposed for the production of energy from biomass. In this study, combustion of brown coals and mushroom waste was done. Mass change of samples and emission of hydrocarbon components were measured. As the results, we obtained combustion rate constant. Also activation energy was calculated in char combustion step. Hydrocarbon components were more generated in low oxygen concentration than high. Emission amount of hydrocarbon components in mushroom waste was significantly increased comparing to brown coal.

• Korean Journal of Soil Science and Fertilizer
• /
• v.47 no.5
• /
• pp.381-389
• /
• 2014

$NH_4$-N contents in the soil treated were relatively high in the initial stages, but rapidly decreased at 124 days after treatment. $NO_3$-N contents were shown to be opposite patterns of $NH_4$-N contents. $CO_2$ emissions in the non-treatment and Carbonized rice hull treatment with application of NPK fertilizers decreased by 43.7 and 21.9% relative to the non-application of NPK fertilizer plot except 5.4% increasement in the pig manure compost treatment. $N_2O$ emissions of the non-application, the Expander rice hull application, and bio-char treatment increased by 90, 25, and 21.4%, respectively, but decreased by 54.2% in the pig manure compost treatment applied with NPK fertilizers compared with the NPK fertilizer non-application plot.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.443-446
• /
• 2009

바이오매스 에너지라 함은 생물체를 구성하는 유기물을 이용하는 에너지이다. 바이오매스는 에너지 위기 및 $CO_2$에 의한 지구온난화 및 화석자원의 고갈이 진행되면서, 화석연료와 달리 재생이 가능하고 지속 가능한 자원으로 각광을 받고 있다. 그 중에서도 목질계 바이오매스는 다른 신재생에너지원에 비해 국내 잠재량이 가장 풍부한 에너지원 중의 하나이다. 바이오매스 에너지 기술로는 직접연소, 열화학적 변환, 생화학적 변환의 기술이 있다. 본 연구에서는 목재를 원료로 한 부분산화 조건의 숯 생산 공정에서 목재의 열분해 가스 생산특성을 고찰하였다. 열분해가스 중에 응축된 목초액의 pH는 3.58～3.92 정도로 분석 되었고, 산도는 시간이 경과 할수록 2.74에서 4.44%로 농도가 증가 되었다. 숯 생산 공정에서의 목재의 열분해는 초기부터 48시간까지는 열분해가스의 조성의 변화가 거의 없었고, 48시간 경과 후에는 열분해가스 중에 가연성가스인 $H_2$, CO, $CH_4$가 약 5%정도 배출되는 것을 알 수 있었다.

• Environmental Engineering Research
• /
• v.21 no.2
• /
• pp.180-187
• /
• 2016

In the present work, bael shell (aegle marmelos) is used as the feedstock for pyrolysis, using a fixed bed reactor to investigate the characteristics of the pyrolysis oil. The product yields, e.g., liquid, char and gases are produced from the biomass at different temperatures with the particle size of 0.5-1.0 mm, at the heating rate of $150^{\circ}C/min$. The maximum liquid yield, i.e., 36.23 wt.%, was found at $5500^{\circ}C$. Some physical properties of the pyrolysis oil such as calorific value, viscosity, density, pH, flash point and fire point are evaluated. The calorific value of the bael shell pyrolysis oil was 20.4 MJ/kg, which is slightly higher than the biomass, i.e., 18.24 MJ/kg. The H/C and O/C ratios of the bio-oil were found as 2.3 and 0.56 respectively, which are quite higher than some other bio-oils. Gas Chromatography and Mass Spectroscopy (GC-MS) and Fourier Transform Infra-red (FTIR) analyses showed that the pyrolysis oil of bael shell is mostly composed by phenolic and acidic compounds. The results of the properties of the bael shell pyrolysis oil reveal the potential of the oil as an alternate fuel with the essential upgradation of some properties.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2005.10a
• /
• pp.586-591
• /
• 2005

Syngas or fuel gas production through biomass gasification is a century old technology. Biomass gasification is getting more and more interest recently as one of competitive renewable energy technologies. It does not contribute to increasing greenhouse gases(GHG). A down-draft gasifier was designed and tested for syngas quality using different fuel sets in this study. The gasifier was of about 100kW capacity. Tests were conducted at air flow rates ranging from 10 to $60m^3/hr$. Fuels tested included wood chips and wood char. The results showd that gas quality in terms of flammability was reasonably good when the temperatures were over $600^{\circ}C$ inside the gasifier. Although $800^{\circ}C$ or higher is recommended, gas quality was reasonably good. If insulation was provided outside the gasifier, the temperature would increase. When wood chips were used, the temperature was below $600^{\circ}C$ and gas quality was not good. It seemed that calorific values of fuel and height of reduction zone in the gasifier are very important. The results of the tests would provide important information for designing more improved gasifier and its operation.

• Transactions of the Korean hydrogen and new energy society
• /
• v.30 no.1
• /
• pp.35-42
• /
• 2019

Recently, the gradual increase in energy acceptance is mostly satisfied by fossil fuels, but research and development of renewable energy sources are attracting attention due to fossil fuel supply and greenhouse gas problem. The disadvantage is that renewable energy can not be produced continuously. This being so, energy storage is an important technology in renewable energy. In this study, microwave was used to convert carbon receptor-carbon dioxide to gas fuel.

• Journal of the Korean Wood Science and Technology
• /
• v.36 no.6
• /
• pp.138-146
• /
• 2008

The chemical compositions, cell wall biopolymers and non-isothermal behavior of the stem biomass of Nicotiana Tabacum originated from tobacco industry were investigated in depth. On a weight basis, the contents of total ash and total sugar are 19.1% and 20.7% respectively. Lignin content was around 3% of tobacco stem biomass while pectin was over 7%. The holo-cellulose content in cell wall biopolymer was around 13% and the $\alpha$-cellulose constitutes 60% of the total holo-cellulose. The thermal behavior of stem biomass showed different patterns depending on either inert (nitrogen) or oxidizing (air) atmospheric condition. In the air atmosphere, the rapid thermal decompositions at around $473^{\circ}C$ and $581^{\circ}C$ were recorded as the peaks in DTG curve, while the peaks were not shown in the nitrogen atmosphere condition. The thermal analysis of the freeze dried soluble obtained from hot water extraction of tobacco stem biomass showed that the rapid thermal decomposition at around $581^{\circ}C$ in the air atmosphere was due to the residual char originated from the soluble fraction. The distinct difference in thermal decomposition between hemicellulose and cellulose were easily found in the DTG curve obtained in the nitrogen atmosphere.

• Korean Chemical Engineering Research
• /
• v.52 no.6
• /
• pp.821-825
• /
• 2014

Steam gasification of sawdust char was performed in a thermobalance reactor at high temperature. Gasification temperature was changed from $850^{\circ}C$ to $1400^{\circ}C$ and steam partial pressure was 0.3, 0.5 and 0.7 atm. Three models of gas-solid reaction were applied to the reaction kinetics analysis and modified volumetric model was an appropriate model. Reaction control regime and diffusion control regime were distinct depending on the temperature. Apparent activation energy and pre-exponential factors for both of the regimes were evaluated and the effects of steam partial pressure were examined. $H_2$ concentration in the produced gas was two times higher than that of CO due to the gasification accompanying by the water gas shift reaction.

• Journal of the Korean Wood Science and Technology
• /
• v.40 no.6
• /
• pp.445-453
• /
• 2012

In this study the effects of particle size and water content on the yields and physical/chemical properties of pyrolytic products were investigated through fast-pyrolysis of yellow poplar. Water content was critical parameters influencing the properties of bio-oil. The yields of bio-oil were increased with decreasing water content. However, the yield of pyrolytic product was not clearly influenced by feedstock's particle size. The water content, pH and HHV (Higher Heating Value) of bio-oil were measured to 20~30%, 2.2~2.4 and 16.6~18.5MJ/kg, respectively. The water content of feedstock was clearly influenced to water content of bio-oil. In terms of bio-char, HHV of them were measured to 26.2~30.1 MJ/kg with high content of carbon over 80%.

• Clean Technology
• /
• v.25 no.2
• /
• pp.129-139
• /
• 2019

Bamboo is an evergreen perennial plant, and it is known as one of the most productive and fastest-growing plants in the world. It grows quickly in moderate climates with only moderate water and fertilizer. Traditionally in Asia, bamboo is used for building materials, as a food source, and as versatile raw materials. Bamboo as a biomass feedstock can be transformed to prepare activated carbon using the thermal treatment of pyrolysis. The effect of process variables such as carbonization temperature, activation temperature, activation time, the amount of steam, and the mixing ratio of phosphoric acid and bamboo were systematically investigated to optimize the preparation conditions. Steam activation was proceeded after carbonization with a vapor flow rate of $0.8{\sim}1.8mL-H_2O\;g-char^{-1}\;h^{-1}$ and activation time of 1 ~ 3 h at $700{\sim}900^{\circ}C$. Carbon yield and surface area reached 2.04 ~ 20.59 wt% and $499.17{\sim}1074.04m^2\;g^{-1}$, respectively, with a steam flow rate of $1.4mL-H_2O\;g-char^{-1}\;h^{-1}$ for 2 h. Also, the carbon yield and surface area were 24.67 wt% and $1389.59m^2\;g^{-1}$, respectively, when the bamboo and phosphoric acid were mixed in a 1:1 weight ratio ($700^{\circ}C$, 2 h, $1.4mL-H_2O\;g-char^{-1}\;h^{-1}$). The adsorption of methylene blue into the bamboo activated carbon was studied based on pseudo first order and second order kinetics models. The adsorption kinetics were found to follow the pseudo second order model, which is governed by chemisorption.