• The Journal of Fisheries Business Administration
• /
• v.47 no.3
• /
• pp.53-69
• /
• 2016

The purpose of this study is to explore the ecosystem service and benefit indicators of natural seaweed beds. Ecosystems of natural seaweed beds provide a wide range of services and benefits to human society including provisioning services, regulating services, supporting services, and cultural services. Indicators for each of the ecosystem services are chosen by marine plants ecologists and as follows. Ecosystem indicators of natural seaweed beds for provisioning services are well-being food(amount of seaweed harvested/amount of fish landed, fish biomass, area of natural seaweed beds, the number of species, contribution to the second production), raw materials(amount of biomass by breed, amount of aquaculture feed), genetic resources(amount of genetic material extracted, amount of genetic material contained by age and habitat), and medicinal resources(amount of medicinal material extracted). Ecosystem indicators of natural seaweed beds for regulating services are air purification(amount of fine dust/NOx or $SO_2$ captured), climate regulation(amount of $CO_2$ sequestered), waste treatment(amount of N, P stored, biochemical degradation capacity COD), and costal erosion prevention(length and change of natural coast line, amount of sediment prevented). Ecosystem indicators of natural seaweed beds for supporting services are lifecycle and maintenance(primary production, contribution to the second production) and gene pool protection(amount of compositional factors in ecosystem, introduced species). Ecosystem indicators of natural seaweed beds for cultural services are recreation and tourism(the number of visits of an area) and information for cognitive development(amount of time spent in education, research and individual learning about ecosystem of natural seaweed beds).

• Korean Journal of Microbiology
• /
• v.16 no.4
• /
• pp.170-179
• /
• 1978

By the successive enrichment culture, more than 250 methanol-utilizing bacteria were isolated from various samples such as soil, waste water and sewage. Two strains of which were selected and tentatively identified as Acinetobacter sp. and Pseudomonas sp. experiments were carried out to determine the growth conditions for the higher biomass yield and to demonstrate the difference to protein composition dependent upon carbon sources of these two species. the results were as follows ; 1. the optimum pH was determined as 8 in the both species. The optimum temperature in Acinetobacter sp. was $25^{\circ}C{\sim}30^{\circ}C$ and pseudomonas sp. was $30^{\circ}C-35^{\circ}C$. The optimum initial concentration of mthanol was determined as 1-2% in Acinetobacter sp. and 2-3% in pseudomonas sp. 2. The optimum concnetrations of nitrogen source, micro-elements, and vitamins such as biotin and thiamine-HCl in Acnetobactar sp. were 1g $(NH_4)_3SO4,\;1{\sim}3mg\;Mn^{++},\;4mg\;Fe^{++},\;10{\mu}g\;biotin,\;and\;100{\mu}g$ thiamine-HCl per liter medium. In the Pseudomonas sp., 2g $(NH_4)_3SO4,\;1mg\;Mn^{++},\;trace\;amounts\;of\;Fe^{++},\;5{\mu}g\;biotin,\;and\;100{\mu}g$ thiamine HCl per liter were effective. Maximum biomass yield was 2.5g/l in Acinetobacter sp. and 4.8g/l in Pseudomonas sp. 3. Protein composition of the two strains exhibited that alkai-labile protein was higher than alkali-stable protein. In Pseudomonas sp., the contents of acid soluble fraction and alkali-stable protein of the cells grown in the methanol medium were higher than in sucrose medium. On the other hand, in Acinetobacter sp., alkalilabile protein of the cells grown in sucrose medium was higher than in methanol medium.

• Korean Chemical Engineering Research
• /
• v.50 no.5
• /
• pp.908-912
• /
• 2012

Lauan sawdust was gasified by steam reforming for hydrogen production from biomass waste. The fixed bed gasification reactor with 1m height and 10.2 cm diameter was utilized for the analysis of temperature and catalysts effect. Steam was injected to the gasification reactor for the steam reforming effect. Lauan sawdust was mixed with potassium carbonate, sodium carbonate, calcium carbonate, sodium carbonate + potassium carbonate and magnesium carbonate + calcium carbonate catalysts of constant mass fraction of 8:2 which was injected to the fixed gasification equipment. The compositions of production gas of gasification reaction were analyzed at the temperature range from $400^{\circ}C$ to $700^{\circ}C$. Fractions of hydrogen, methane and carbon monoxide gas in the production gas increased when catalysts were used. Fractions of hydrogen, methane and carbon monoxide gas were increased with increasing temperature. The highest hydrogen yield was obtained with sodium carbonate catalyst.

• Applied Chemistry for Engineering
• /
• v.19 no.2
• /
• pp.209-213
• /
• 2008

The fixed bed gasification reactor with 1 m hight and 10.2 cm diameter was utilized for the hydrogen production from biomass wastes. Lauan sawdust was used for non-catalytic and catalytic gasification reaction as a sample in the fixed bed reactor. The fixed bed temperature and catalyst are the major variables affecting the process operation. Thus, the effect of fixed bed temperature and the catalysts on gas composition were studied at the temperature range from $400^{\circ}C$ to $700^{\circ}C$. The yield of hydrogen was increased at higher temperature in the fixed bed reaction. Fractions of hydrogen, carbon monoxide and methane gas in the product gas increased when sodium carbonate ($Na_2CO_3$) and potassium carbonate ($K_2CO_3$) catalysts were used. Furthermore, sodium carbonate catalyst was more effective to obtain higher hydrogen yield compared to potassium carbonate catalyst.

• Korean Journal of Soil Science and Fertilizer
• /
• v.50 no.6
• /
• pp.574-587
• /
• 2017

Excessive application of nitrogen (N) fertilizer to support switchgrass growth for bioenergy production may cause adverse environmental effects. The objective of this study was to determine optimum N application rate to increase biomass yield of switchgrass and to reduce adverse environmental effects related to N. Switchgrass was planted in May 2008 and biomass yield, N uses of switchgrass, nitrate ($NO_3$) leaching, and nitrous oxide ($N_2O$) emission were evaluated from 2010 through 2011. Total N removal significantly increased with N rate despite the fact that yield did not increased with above $56kg\;N\;ha^{-1}$ of N rate. Apparent nitrogen recoveries were 4.81 and 5.48% at 56 and $112kg\;N\;ha^{-1}$ of N rate, respectively. Nitrogen use efficiency decreased into half with increasing N rate from 56 to $112kg\;N\;ha^{-1}$. Nitrate leaching and $N_2O$ emission were related to N use of switchgrass. There was no significant difference of cumulative $NO_3$ leaching between 0 and $56kg\;N\;ha^{-1}$ but, it significantly increased at $112kg\;N\;ha^{-1}$. There was no significant difference of cumulative $N_2O$ emission among N rates in crest, but it significantly increased at $112kg\;N\;ha^{-1}$ in toe. Excessive N application rate (above $56kg\;N\;ha^{-1}$) beyond plant requirement could accelerate $NO_3$ leaching and $N_2O$ emission in switchgrass field. Overall, $56kg\;N\;ha^{-1}$ might be optimum N application rate in reducing economic waste on N fertilizer and adverse environmental impacts.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.38 no.3
• /
• pp.372-385
• /
• 2014

Lignin is an abundant natural polymer in the biosphere and second only to cellulose; however, it is under-utilized and considered a waste. In this study, lignin was fabricated into nanofibers via electrospinning. The critical parameters that affected the electrospinnability and morphology of the resulting fibers were examined with the aim to utilize lignin as a resource for a new textile material. Poly(vinyl alcohol) (PVA) was added as a carrier polymer to facilitate the fiber formation of lignin, and the electrospun fibers were deposited on polyester (PET) nonwoven substrate. Eleven lignin/PVA hybrid solutions with a different lignin to PVA mass ratio were prepared and then electrospun to find an optimum concentration. Lignin nano-fibers were electrospun under a variety of conditions such as various feed rates, needle gauges, electric voltage, and tip-to-collector distances in order to find an optimum spinning condition. We found that the optimum concentration for electrospinning was a 5wt% PVA precursor solution upon the addition of lignin with the mass ratio of PVA:lignin=1:5.6. The viscosity of the lignin/PVA hybrid solution was determined as an important parameter that affected the electrospinning process; in addition, the interrelation between the viscosity of hybrid solution and the electrospinnability was examined. The solution viscosity increased with lignin loading, but exhibited a shear thinning behavior beyond a certain concentration that resulted in needle clogging. A steep increase in viscosity was also noted when the electrospun system started to form fibers. Consequently, the viscosity range to produce bead-free lignin nanofibers was revealed. The energy dispersive X-ray analysis confirmed that lignin remained after being transformed into nanofibers. The results indicate the possibility of developing a new fiber material that utilizes biomass with resulting fibers that can be applied to various applications such as filtration to wound dressing.

• Environmental Engineering Research
• /
• v.24 no.1
• /
• pp.127-136
• /
• 2019

Land application of treated palm oil mill effluent (TPOME) could be used as an alternative tertiary wastewater treatment process. However, phenolic compounds in TPOME might be leached to the environment. This study investigated the ability of grasses on reducing phenolic compounds in the leachate after TPOME application. Several pasture grasses in soil pots were compared after irrigating with TPOME from stabilization ponds, which contained 360-630 mg/L phenolic compounds. The number of soil bacteria in planted pots increased over time with the average of $10^8CFU/g$ for mature grasses, while only $10^4-10^6CFU/g$ were found in the unplanted control pots. The leachates from TPOME irrigated grass pots contained lower amounts of phenolic compounds and had lower phytotoxicity than that of control pots. The phenol removal efficiency of grass pots was ranged 67-93% and depended on grass cultivars, initial concentration of phenolic compounds and frequency of irrigations. When compared to water irrigation, TPOME led to an increased phenolic compounds accumulation in grass tissues and decreased biomass of Brachiaria hybrid and Brachiaria humidicola but not Panicum maximum. Consequently, the application of TPOME could be conducted on grassland and the grass species should be selected based on the utilization of grass biomass afterward.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.27 no.3
• /
• pp.169-174
• /
• 2021

Today, plastic waste has become a critical social issue due to the increasing of plastic consumption. Korean annual per capita plastic consumption was 132 kg, the most plastic consuming country in the world. Internationally, Carbon Neutral Agreement is underway due to global warming, consumers' interest and needs for biomass-based plastics has also been increased. In this study, film was produced by adding composite use additives to the biomass-based plastics according to concentration, and the resulting changes in discharge volume, melt index, and tensile strength were investigated. Melt index (MI) was significantly higher in PLA and PBAT than in petroleum-based resin LLDPE and LDPE. Also, among the same resin or in the same treatment group, MI has been increased when the heating temperature is increased. The discharge volume and gravity of the BDP-2 to which 4% compatibilizer was added were found to be higher among all treatments, while the tensile strength of MD and TD was also higher. BDP-2 was suitable to the film producing methods for biodegradable film production.

• Journal of Marine Bioscience and Biotechnology
• /
• v.10 no.2
• /
• pp.91-96
• /
• 2018

There are many eutrophic lakes by point and non-point pollution sources such as in dustrial waste water, domestic raw sewage, and mucks. The eutrophic lakes not only cause algal blooms but also destroy the ecosystem in the lakes due to high nutrient concentrations. The purpose of this study was to improve water quality in eutrophic lakes by cultivating microalgae using photobioreactors (PBRs) with selectively permeable mesh (SPM), supplying nutrients in the lake and inhibiting cell leakage by diffusion and water permeability. Chlorella vulgaris, was cultivated using PBRs with SPM installed in Inkyung Lake located in Inha university, Incheon, Korea. When cultivating C. vulgaris, $8.3g/m^2/day$ of average biomass productivity was obtained at 3 days. Furthermore, concentrations of total nitrogen and phosphorus were reduced by 35.7% and 84.2%, respectively, compared to initial condition and water quality in eutrophic lake was improved to oligotrophic environment. These results suggest that microalgal cultivation using PBRs with SPM in the lake could produce microalgal biomass as well as improve water quality by decreasing nutrient concentrations.

• Korean Journal of Microbiology
• /
• v.21 no.2
• /
• pp.51-60
• /
• 1983

Cultural characteristics of Strptomyces griseolus isolated from the soil were investigated. This strain was disclosed to utilize D-xylose, and D-glactose in preference order as a carbon source with the formation of glucose isomerase. The addition of sweet potato starch also proved effective promoting the total enzyme activity measured at 29% higher than the control. Corn cob, one of waste agricultural resources, was hydrolyzed in 2~3% $H_2SO_4$ solution at $100^{\circ}C$, 3~5 hours to produce a xylose syrup which gave rise to the recovery of 19.9% in a batch system and 28.2% in a repeated system. By the addition of both 2% of xylose syrup(Be'28) prepared by and us 65% of corn steep liquor (total nitrogen 1.2%), enzyme induction was maximized. The enzyme activity was stimulated by the xylose and the cell growth by the C.S.L. Also, remarkable increase of enzyme activity was noticed by the addition of protein acid hydrolysate 86.2% higher than the control. $QO_2$ of the biomass cultured in 30L capacity jarfermentor recorded low oxygen requirement of 251.2 1/hr. Maximum activity of glucose isomerase was observed noted at the 9th hour after inoculation which is 2 hours faster than the stationery was observed noted at the 9th hour after inoculation which is 2 hours faster than the stationery phase of the biomass growth. Glucose isomerase from the strain was activated by adding the $Co^{++}\;and\;Mg^{++}$ with optimum temperature of $73^{\circ}C$ and pH of 7.2. Conversion ratio of 60% glucose to frutose was 42.5% after 70 hours reaction.