• 제목/요약/키워드: Biological pump

검색결과 107건 처리시간 0.021초

인공심장용 전동기구동형 혈액 펌프의 설계 및 해석에 관한 연구 (Design and Analysis of A New Type of the Motor-Driven Blood Pump for Artificial Heart)

  • 천길정;김희찬
    • 대한의용생체공학회:의공학회지
    • /
    • 제10권2호
    • /
    • pp.139-150
    • /
    • 1989
  • 새로운 형태의 인공심장용 전동기구동형 혈액동기구동행 혈액 펌프플 개발하였다. 개발된 혈액 펌프는 소형, 고출력, 브러쉬 없는 직류 전동기를 에너지 변환 장치로 사용하였으며, 이 전동기 자체가 원호 형태의 궤적을 따라 좌우로 회전하도록 고안되었으며, 전동기를 포함한 '회전원통'의 웅직임이 좌우에 부착되어 있는 폴리우레탄으로 제작된 혈액 주머니를 번갈아 밀게 되어 혈액을 박출하게 된다. 본 연구에서 도입한 이동형 작동기 원리에 의해 다른 전동기 구동형 혈액 펌프가 안고 있는 두가지의 중요한 문제점인 펌프 크기의 증가와 자연 심장과의 해부학적인 구조상 접합의 문제점들을 개선할 수 있었다. 또한 펌프의 효율과 전동기에 의한 시스템의 온도 상승, 그러고 펌프 내에 유입되는 유체에 대한 이론적 해석을 실시하였으며, 일련의 모의 순환 실험을 통해 실험 결과를 비교하였다. 개발된 펌프 시스템은 이식형 완전 인공 심장으로 사용하기에 충분한 심박출량(9 L/m)과 전부하에 민감한 반응, 그리고 기계적인 안정도를 보여 주었다.

  • PDF

방사선 동위원소 I-131을 이용한 요드의 IN VIVO 대사 연구 (The Study of Iodine Metabolism IN VIVO Utilizing I-131)

  • 변시명
    • Applied Biological Chemistry
    • /
    • 제19권2호
    • /
    • pp.70-74
    • /
    • 1976
  • Thyroid hormone의 생합성반응기작을 알아보기 위하여 방사선 I-131을 쥐에 주사한 후 thyroid gland을 분리하여 분석하였다. Pancreatin viokase를 처리하여 분리한 요드화합물을 여지 크로마토그라피로 분리 동정하고 이를 radioautography로 분석한 결과 I-131은 주사후 바로 쥐의 체내에서 흡수되어 monoiodotyrosine이 되고 이것은 diiodotyrosine으로 전환됨을 관찰하였다. 실험결과는 diiodotyrosine은 thyroxine 생합성에 있어서 중간생성물이나 반면 triiodothyronine은 오히려 분해산물임을 보여 주었다. 또한 환원제인 propylthiouracil을 투여한 쥐에서 iodine의 체내집적현상(Iodine Pump)은 현저히 증가하였으나 유기 요도화합물을 전환되는 것을 저하였다.

  • PDF

Design of A Pendulum Type Motor-Driven Blood Pump for Artificial Heart

  • 장준근;정대영;김종원;민병구;한동철
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1990년도 춘계학술대회
    • /
    • pp.1-6
    • /
    • 1990
  • A new version of moving actuator electromechanical total artificial heart was designed to improve total efficiency, durability, and fitting inside thoracic cavity. As compared with our present type of the rolling cylinder actuator, this new model has a pendulum-type actuator with reciprocating motion around the fixed circular path, connected through the gear mechanisms to the motor. By using this mechanism, the efficiency and durability could be improved by replacing sliding mechanism with rolling contact elements. Also, the height of the pump could be decreased from 9cm to 7cm with static stroke volume 65cc. With these improvements, we have implanted this new pump in human size animal (less than 70Kg weight).

  • PDF

전기-기계식 이식형 좌심실 보조 시스템의 개발 및 평가 (Development and Evaluation of a Novel Electro-mechanical Implantable Ventricular Assist System)

  • 조한상;김원곤;이원용;곽승민;김삼성;김재기;김준택;류문호;류은숙
    • 대한의용생체공학회:의공학회지
    • /
    • 제22권4호
    • /
    • pp.349-358
    • /
    • 2001
  • A novel electro-mechanical implantable ventricular assist system is developed as a bridge to transplantation or recovery for patients with end-stage heart failure. The developed system is composed of an implanted blood pump, an external monitoring system which stores data, and a wearable system including a portable external driver and a portable power supply system. The blood pump is designed to be implanted into the left upper abdominal space and provides blood flow from the left ventricular apex to the aorta. The pulsatile blood flow is generated by a double cylindrical cam. There was mo excessive heat emission from the blood pump into the temperature-controlled chamber in the heat test and no stagnated flow within the blood sac by the observation in the flow visualization test. Animal experiments were performed using sheep and calves. The maximum assist flow rate reached 7.85L/min in the animal experiment. The evaluation results showed that the developed system was feasible for the implantable ventricular assist system. The long-term in vitro durability test and mid-term in vivo experiments are in progress and mow the modified next model is under development.

  • PDF

A Study of Electromagnetic Actuator for Electro-pneumatic Driven Ventricular Assist Device

  • Jung Min Woo;Hwang Chang Mo;Jeong Gi Seok;Kang Jung Soo;Ahn Chi Bum;Kim Kyung Hyun;Lee Jung Joo;Park Yong Doo;Sun Kyung
    • 대한의용생체공학회:의공학회지
    • /
    • 제26권6호
    • /
    • pp.393-398
    • /
    • 2005
  • An electromechanical type is the most useful mechanism in the various pumping mechanisms. It, however, requires a movement converting system including a ball screw, a helical cam, or a solenoid-beam spring, which makes the device complex and may lessen reliability. Thus, the authors have hypothesized that an electromagnetic actuator mechanism can eliminate the movement converting system and that thereby enhance the mechanical reliability and operative simplicity of an electro­pneumatic pump. The purpose of this study was to show a novel application of electromagnetic actuator mechanism in pulsatile pump and to provide preliminary data for further evaluations. The electromagnetic actuator consists of stators with a single winding excitation coil and movers with a high energy density neodymium-iron-boron permanent magnet. A 0.5mm diameter wire was used for the excitation coil, and 1000 turns were wound onto the stators core with parallel. A prototype of extracorporeal electro-pneumatic pump was constructed, and the pump performance tests were performed using a mock system to evaluate the efficiency of the electromagnetic actuator mechanism. When forward and backward electric currents were supplied to the excitation coil, the mover effectively moved back and forth. The nominal stroke length of the actuator was 10mm. The actuator dimension was 120mm in diameter and 65mm in height with a mass of 1.4kg. The prototype pump unit was 150mm in diameter, 150mm in thickness and 4.5kg in weight. The maximum force output was 70N at input current of 4.5A and the maximum pump rate was 150 beats per minute. The maximum output was 2.0 L/minute at a rate of 80bpm when the afterload was 100mmHg. The electromagnetic actuator mechanism was successfully applied to construct the prototype of extracorporeal electro­pneumatic pump. The authors provide the above results as a preliminary data for further studies.

완전이식형 인공심장의 좌,우 심박출량 균형의 개선에 관한 연구 (A New Method for Enhancement of Right-Left Pump Output Balance in the Totally Implantable Artificial Heart)

  • 최원우;김희찬;김원곤;노준량;김인영;민병구
    • 대한의용생체공학회:의공학회지
    • /
    • 제19권4호
    • /
    • pp.385-391
    • /
    • 1998
  • 이동형 작동기 방식의 완전이식형 인공심장을 대상으로 부가적인 체적보상실(compliance chamber)이 필요없는 새로운 균형적 심방압 유지방법을 개발하였다. 이동작동기으 lqleocld 원주운동을 통하여 좌우심박출의 균형을 유지할 수 있었으며, 두 시실 사이의 공간에 존재하는 공기가 심박출량 차이를 보상하도록 고안되었다. 인공심장 표면이 가변적인 부분은 좌우 심박출량의 균형 보상을 도와주게 된다. 그러나 인공심장 표면의 가변성을 높일 경우, 전체 심박출량의 감소를 유발할 수 있다. 본 논문에서는 두 심실사의 공기량을 조절하여 좌우 심박출량의 균형 및 전체 심박량에 대하여 좋은 조건을 모의 순환 실험을 통하여 결정하였다. 새로운 인공심장은 63kg의 양에 이식하여 3일간 생존하였으며, 생존기간중 평균심박출량은 4.21/min 이었으며, 심방압은 15mmHg 이하로 유지되었다.

  • PDF

Preliminary Study of a New Extracorporeal Membrane Oxygenator Development When Using Pulsatile Flow

  • Lee, Sa-Ram;Lee, Kyung-Soo;Jung, Jae-Hoon;Mun, Cho-Hay;Min, Byoug-Goo
    • 대한의용생체공학회:의공학회지
    • /
    • 제28권3호
    • /
    • pp.387-391
    • /
    • 2007
  • An oxygenator is a very important artificial organ and widely used for patients with lung failure or during open heart surgery. Although an oxygenator has been widely studied worldwide to enhance its efficiency, studies on oxygenators, in particular when using a pulsatile blood flow, are domestically limited. Therefore, a new oxygenator was developed in the lab and animal experimental results are described in the paper. The oxygenator is composed of polycarbonate housing and polypropylene hollow fibers. It has a total length of 400 mm and a surface area of $1.7 m^2$. The animal experiment lasted for 4 hours. The blood flow rate was set to 2 L/min and a pulsatile blood pump, T-PLS (Twin-Pulse Life Support), was used. Samples were drawn at the oxygenator's inlet and outlet. The total hemoglobin (Hb), saturation oxygen ($sO_2$), and partial oxygen pressure ($pO_2$), partial $CO_2$ pressure ($pCO_2$), and plasma bicarbonate ion concentration ($HCO_3^-$) were measured. The oxygen and carbon dioxide transfer rates were also calculated based on the experimental data in order to estimate the oxygenator's gas transfer efficiency. The oxygen and carbon dioxide transfer rates were $16.4{\pm}1.58$ and $165.7{\pm}10.96 mL/min$, respectively. The results showed a higher carbon dioxide transfer rate was achieved with the oxygenator. Also, the mean inlet and outlet blood pressures were 162.79 and 137.92 mmHg, respectively. The oxygenator has a low pressure drop between its inlet and outlet. The aim of own preliminary study was to make a new oxygenator and review its performance when applying a pulsatile blood pump thus, confirming the possibility of a new oxygenator suitable for pulsatile flow.

Genomic Analysis of the Extremely Halophilic Archaeon Halobacterium noricense CBA1132 Isolated from Solar Salt That Is an Essential Material for Fermented Foods

  • Lim, Seul Ki;Kim, Joon Yong;Song, Hye Seon;Kwon, Min-Sung;Lee, Jieun;Oh, Young Jun;Nam, Young-Do;Seo, Myung-Ji;Lee, Dong-Gi;Choi, Jong-Soon;Yoon, Changmann;Sohn, Eunju;Rahman, MD. Arif-Ur;Roh, Seong Woon;Choi, Hak-Jong
    • Journal of Microbiology and Biotechnology
    • /
    • 제26권8호
    • /
    • pp.1375-1382
    • /
    • 2016
  • The extremely halophilic archaeon Halobacterium noricense is a member of the genus Halobacterium. Strain CBA1132 (= KCCM 43183, JCM 31150) was isolated from solar salt. The genome of strain CBA1132 assembled with 4 contigs, including three rRNA genes, 44 tRNA genes, and 3,208 open reading frames. Strain CBA1132 had nine putative CRISPRs and the genome contained genes encoding metal resistance determinants: copper-translocating P-type ATPase (CtpA), arsenical pump-driving ATPase (ArsA), arsenate reductase (ArsC), and arsenical resistance operon repressor (ArsR). Strain CBA1132 was related to Halobacterium noricense, with 99.2% 16S rRNA gene sequence similarity. Based on the comparative genomic analysis, strain CBA1132 has distinctly evolved; moreover, essential genes related to nitrogen metabolism were only detected in the genome of strain CBA1132 among the reported genomes in the genus Halobacterium. This genome sequence of Halobacterium noricense CBA1132 may be of use in future molecular biological studies.

The Effect of Pulsatile Flow on Ultrafiltration In-Vitro Study and Comparison with Roller Pump

  • Lee K.;Jeong J. H.;Mun C. H.;Lee J. C.;Min B. G.
    • 대한의용생체공학회:의공학회지
    • /
    • 제26권5호
    • /
    • pp.337-341
    • /
    • 2005
  • Blood pulsation has been reported to have an advantageous effect on extracorporeal blood circulation. However, the study of pulsatile blood flow in renal replacement therapy is very limited. The in-vitro experimental results of pulsatile blood flow on ultrafiltration, when compared with the conventional roller pump, are described in this paper. Methods: Blood flow rate (QB) and transmembrane pressure (TMP) were considered as regulating factors that have an influence on ultrafiltration. Experiments were performed under the condition of equal TMP and OB in both pulsatile and roller pump groups, Several kinds of hollow fiber dialyzers were tested using distilled water containing chemicals as a blood substitute. Mean TMP (mTMP) varied from 10 to 90mmHg while the QB was 200ml/min. Results: Ultrafiltration rate (QUF) was found to be linearly proportional to TMP, whereas QB had little influence on QUF. In addition, QUF was higher in the pulsatile group than the roller pump group at the identical TMP. Conclusion: In the controlled test, QUF increased solely as a consequence of blood pulsation, which implies that the pulse frequency represents an additional and important clinical variable during renal replacement therapy.

기계학습법을 이용한 동해 울릉분지의 봄과 여름 순군집생산 추정 (Estimation of the Spring and Summer Net Community Production in the Ulleung Basin using Machine Learning Methods)

  • 함도식;이인희;추민기
    • 한국해양학회지:바다
    • /
    • 제29권1호
    • /
    • pp.1-13
    • /
    • 2024
  • 동해 남서부해역은 대마난류나 연안 용승에 의한 영양염 공급 등으로 동해 북부나 동부에 비해 일차생산력이 높은 것으로 알려져 있지만, 이 해역의 생물 펌프에 관한 연구는 제한적이다. 본 연구에서는 O2/Ar 측정으로 산출한 고해상도 순군집생산 현장 관측 결과와 기계학습 모형을 결합하여 시공간 해상도가 8일 간격, 4 km인 봄과 여름 순군집생산 시계열 자료를 추정하였다. 기계 모형의 예측과 실측의 평균 제곱근 오차는 6 mmol O2 m-2 d-1로 관측값 평균의 15%에 해당했다. 울릉분지 중앙부의 순군집생산은 3월에 49 mmol O2 m-2 d-1로 가장 높았고, 6월과 7월에 18 mmol O2 m-2 d-1로 가장 낮았다. 이 같은 계절 변화는 3He 기체교환율로 추정한 질산염 공급률이나 234Th 비평형법으로 추정한 입자유기탄소 방출률과 유사하였다. 봄과 여름의 순군집생산 추정으로 한정된 이 연구방법을 가을과 겨울로 확대하기 위해서는 아표층수의 표층 혼입에 따른 O2/Ar 순군집생산의 오차를 보정하는 연구가 필요하다.