• Proceedings of the Korea Society of Environmental Toocicology Conference
• /
• 2002.05a
• /
• pp.71-71
• /
• 2002

• Journal of the Korean Institute of Gas
• /
• v.21 no.4
• /
• pp.92-102
• /
• 2017

Fischer-Tropsch synthesis reaction converts syngas (mixture of CO and H2) to valuable hydrocarbon products. Simulation of low temperature Fischer -Tropsch Synthesis reaction and heat transfer at intensified process condition using catalyst filled single and multichannel microchannel reactor is considered. Single channel model simulation indicated potential for process intensification (higher GHSV of $30000hr^{-1}$ in presence of theoretical Cobalt based super-active catalyst) while still achieving CO conversion greater than ~65% and $C_{5+}$ selectivity greater than ~74%. Conjugate heat transfer simulation with multichannel reactor block models considering three different combinations of reactor configuration and coolant type predicted ${\Delta}T_{max}$ equal to 23 K for cross-flow configuration with wall boiling coolant, 15 K for co-current flow configuration with subcooled coolant, and 13 K for co-current flow configuration with wall boiling coolant. In the range of temperature maintained (498 - 521 K), chain growth probability calculated is desirable for low-temperature Fisher-Tropsch Synthesis.

• Polymer(Korea)
• /
• v.31 no.4
• /
• pp.283-288
• /
• 2007

Polymer blends containing poly(acrylonitrile-butadiene-styrene) (ABS) and polycarbonate(PC) (70/30, wt%) with compatibilizer were prepared using twin screw extruder. Compatibilizers were prepared by reactive extrusion with the ABS, maleic anhydride(MAH) and dicumyl peroxide(DCP) using twin screw extruder In the ABS/PC (70/30) blends, tensile strength did not change significantly, but increased from 52.25 to 55.03 MPa when the ABS-g-MAH was added in the amount of 5 phr. From the results of rheological properties, storage modulus of the ABS/PC/ABS-g-MAH blends at low frequencies showed lager value than that of the ABS/PC(70/30) blend. From the results of the morphological properties of the ABS/PC(70/30) blend, it was observed that the drop size of the PC ranged from 1.2 to $1.5\;{\mu}m$ and did not change significantly with the addition of the ABS-g-MAH($1{\sim}10\;phr$). From the results of the storage modulus, complex viscosity, and tensile strength of the ABS/PC (70/30) blends, it is found that the ABS-g-MAH is an effective compatibilizer in the ABS/PC (70/30) blends when the ABS-g-MAH is added in the amount of 5 phr.

• Microbiology and Biotechnology Letters
• /
• v.44 no.3
• /
• pp.285-292
• /
• 2016

In the present study, we evaluated the in vitro wound-healing properties of two types of rice cell extracts (RCEs; prepared using ethanol and pressurized hot water extraction methods), using human dermal fibroblasts and keratinocytes. The effects of the RCEs (at 25–100 μg/ml) on cytotoxicity and cell migration were assessed. Both RCEs were not cytotoxic to the two cell types, instead increasing their proliferation by up to 25% in a dose-dependent manner compared with the controls. Furthermore, both RCEs significantly enhanced the migratory ability of the two cell types (fibroblast, 230–450%; keratinocyte, 170–350%). Additionally, we examined the effect of the RCEs on type I collagen synthesis, which is important in the wound reconstruction process. The RCEs significantly increased collagen type I mRNA and protein levels to a degree comparable to that induced by vitamin C. These results suggest the RCEs to be candidate materials for use in promoting wound healing, through their actions of increasing cell migration and accelerating wound re-epithelialization.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.9
• /
• pp.1308-1321
• /
• 2013

The emergence of microcarrier technology has brought a renewed interest in anchorage-dependent cell culture for high-yield processes. Well-known in vaccine production, microcarrier culture also has potential for application in other fields. In this work, two types of microcarriers were evaluated for small-scale monoclonal antibody (mAb) production by CHO-K1 cells. Cultures (5 ml) of microporous Cytodex 3 and macroporous CultiSpher-S carriers were performed in vented conical tubes and subsequently scaled-up (20 ml) to shake-flasks, testing combinations of different culture conditions (cell concentration, microcarrier concentration, rocking methodology, rocking speed, and initial culture volume). Culture performance was evaluated by considering the mAb production and cell growth at the phases of initial adhesion and proliferation. The best culture performances were obtained with Cytodex 3, regarding cell proliferation (average $1.85{\pm}0.11{\times}10^6$ cells/ml against $0.60{\pm}0.08{\times}10^6$ cells/ml for CultiSpher-S), mAb production ($2.04{\pm}0.41{\mu}g/ml$ against $0.99{\pm}0.35{\mu}g/ml$ for CultiSpher-S), and culture longevity (30 days against 10-15 days for CultiSpher-S), probably due to the collagen-coated dextran matrix that potentiates adhesion and prevents detachment. The culture conditions of greater influence were rocking mechanism (Cytodex 3, pulse followed by continuous) and initial cell concentration (CultiSpher-S, $4{\times}10^5$ cells/ml). Microcarriers proved to be a viable and favorable alternative to standard adherent and suspended cultures for mAb production by CHO-K1 cells, with simple operation, easy scale-up, and significantly higher levels of mAb production. However, variations of microcarrier culture performance in different vessels reiterate the need for optimization at each step of the scale-up process.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.3
• /
• pp.400-409
• /
• 2017

Objective: This study was conducted to evaluate the effects of dietary protein sources (soybean meal, SBM; low-gossypol cottonseed meal, LCSM; double-zero rapeseed meal, DRM) on laying performance, egg quality, and plasma parameters of laying hens. Methods: A total of 432 32-wk-old laying hens were randomly divided into 6 treatments with 6 replicates of 12 birds each. The birds were fed diets containing SBM, $LCSM_{100}$, or $DRM_{100}$ individually or in combination with an equal amount of crude protein (CP) ($LCSM_{50}$, $DRM_{50}$, and $LCSM_{50}-DRM_{50}$). The experimental diets, which were isocaloric (metabolizable energy, 11.11 MJ/kg) and isonitrogenous (CP, 16.5%), had similar digestible amino acid profile. The feeding trial lasted 12 weeks. Results: The daily egg mass was decreased in the $LCSM_{100}$ and $LCSM_{50}-DRM_{50}$ groups (p<0.05) in weeks 41 to 44. The $LCSM_{50}$ group did not affect egg production compared to the SBM group in weeks 41 to 44 (p>0.05) and showed increased yolk color at the end of the trial (p<0.05). Compared to the SBM group, the $LCSM_{100}$ and $LCSM_{50}-DRM_{50}$ groups showed decreased albumen weight (p<0.05), CP weight in the albumen (p<0.05) and CP weight in the whole egg (p<0.05) at 44 weeks. Plasma total protein (TP) levels were lower in the $LCSM_{100}$ group than in the SBM group at 44 weeks (p<0.05); however, TP, albumin, and globulin levels were not significantly different between the $LCSM_{50}$ group and the SBM group or between the $DRM_{50}$ group and the SBM group (p>0.05). Conclusion: Together, our results suggest that the $LCSM_{100}$ or $DRM_{100}$ diets may produce the adverse effects on laying performance and egg quality after feeding for 8 more weeks. The 100.0 g/kg LCSM diet or the 148.7 g/kg DRM diet has no adverse effects on laying performance and egg quality.

• Journal of Microbiology
• /
• v.44 no.4
• /
• pp.423-431
• /
• 2006

Among 53 Acinetobacter baumannii isolates collected in 2004, nine imipenem-resistant isolates were obtained from clinical specimens taken from patients hospitalized in Busan, Korea. Nine carbapenemase-producing isolates were further investigated in order to determine the mechanisms underlying resistance. These isolates were then analyzed via antibiotic susceptibility testing, microbiological tests of carbapenemase activity, pI determination, transconjugation test, enterobacterial repetitive consensus (ERIC)-PCR, and DNA sequencing. One outbreak involved seven cases of infection by A. baumannii producing OXA-23 ${\beta}-lactamase$, and was found to have been caused by a single ERIC-PCR clone. During the study period, the other outbreak involved two cases of infection by A. baumannii producing IMP-1 ${\beta}-lactamase$. The two clones, one from each of the outbreaks, were characterized via a modified cloverleaf synergy test and an EDTA-disk synergy test. The isoelectric focusing of the crude bacterial extracts detected nitrocefin-positive bands with pI values of 6.65 (OXA-23) and 9.0 (IMP-1). The PCR amplification and characterization of the amplicons via direct sequencing showed that the clonal isolates harbored $bla_{IMP-1}$ or $bla_{oxA-23}$ determinants. The two clones were characterized by a multidrug resistance phenotype that remained unaltered throughout the outbreak. This resistance encompassed penicillins, extended-spectrum cephalosporins, carbapenems, monobactams, and aminoglycosides. These results appear to show that the imipenem resistance observed among nine Korean A. baumannii isolates could be attributed to the spread of an IMP-lor OXA-23-producing clone. Our microbiological test of carbapenemase activity is a simple method for the screening of clinical isolates producing class D carbapenemase and/or class B $metallo-{\beta}-lactamase$, in order both to determine their clinical impact and to prevent further spread.

• Journal of Biosystems Engineering
• /
• v.28 no.4
• /
• pp.343-350
• /
• 2003

This study was conducted to find out the coefficient relationships between intensity values of image processing and biological/physical parameters of soil in greenhouses. Soil images were obtained by an image processing system consisting of a personal computer and a CCD earners. A software written in Visual C$\^$++/ systematically integrated the functions of image capture, image processing, and image analysis. Image processing data of the soil samples were analyzed by the method of regression analysis. The results are as follows. For detecting soil density of unbroken soil samples, the highest correlation coefficients of 0.82 and 0.84, respectively were obtained fur R-value and S-value among image processing data while it was 0.97 for G-value. Considering the relationship between biological characteristics and image processing data of soil in greenhouse, the correlation was found generally low. For pH of unbroken soil sample, the correlation coefficients were found 0.87, 0.85, and 0.94, respectively with G, I, and H values of image processing data. In the case of bacteria, any correlation was not found with the image processing data For Actinomyctes, they were 0.86 and 0.85, respectively with G-value and B-value of image processing data showing high correlation coefficient compared to the other variables. The correlation coefficient between Fungi and H-value was shown 0.88, the highest among the variables higher than 0.8 while the other variables showed low correlation. For broken soil samples from greenhouse, the relation between biological parameter and image processing data were rarely shown in this study. The results of this study indicated that most of correlation coefficient between the variables were usually lower than 0.01. Accordingly, it was assumed that the soil should be used without broken to fairly estimate biological characteristics using CCD camera.

• Journal of Ginseng Research
• /
• v.41 no.4
• /
• pp.572-577
• /
• 2017

Background: Panax ginseng Meyer is cultivated because of its medicinal effects on the immune system, blood pressure, and cancer. Major ginsenosides in fresh ginseng are converted to minor ginsenosides by structural changes such as hydrolysis and dehydration. The transformed ginsenosides are generally more bioavailable and bioactive than the primary ginsenosides. Therefore, in this study, hydrothermal processing was applied to ginseng preparation to increase the yields of the transformed ginsenosides, such as 20(S)-Rg3, Rk1, and Rg5, and enhance antioxidant activities in an effective way. Methods: Ginseng extract was hydrothermally processed using batch reactors at $100-160^{\circ}C$ with differing reaction times. Quantitative analysis of the ginsenoside yields was performed using HPLC, and the antioxidant activity was qualitatively analyzed by evaluating 2,2'-azino-bis radical cation scavenging, 2,2-diphenyl-1-picrylhydrazyl radical scavenging, and phenolic antioxidants. Red ginseng and sun ginseng were prepared by conventional steaming as the control group. Results: Unlike steaming, the hydrothermal process was performed under homogeneous conditions. Chemical reaction, heat transfer, and mass transfer are generally more efficient in homogeneous reactions. Therefore, maximum yields for the hydrothermal process were 2.5-25 times higher than those for steaming, and the antioxidant activities showed 1.6-4-fold increases for the hydrothermal process. Moreover, the reaction time was decreased from 3 h to 15-35 min using hydrothermal processing. Conclusion: Therefore, hydrothermal processing offers significant improvements over the conventional steaming process. In particular, at temperatures over $140^{\circ}C$, high yields of the transformed ginsenosides and increased antioxidant activities were obtained in tens of minutes.

• Journal of the Korean Institute of Gas
• /
• v.18 no.4
• /
• pp.63-67
• /
• 2014

Fischer-Tropsch synthesis mainly produces a wax which is a viscous liquid for long carbon chain. When a catalytic fixed-bed reactor is used for Fischer-Tropsch synthesis, the wax generated on a catalyst surface can keep adsorbing on the catalyst surface. This liquid hold-up causes significant pressure drop and clogging problems through the reactor. Thus, the model for liquid hold-up is required to design the size of reactor and catalyst particles. In this study, the liquid hold-up model considering structural and operational conditions was proposed based on empirical equations for convective mass transfer between the syngas flow and the wax-adsorbed catalyst. The developed model was validated by comparing with the experimental data from Knochen's work (2010). The influence of reactor length and coross section on the wax hold-up in reactor were analyzed and the optimal reactor size were proposed.