• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2001.09a
• /
• pp.235-238
• /
• 2001

Monod kinetics에 관련된 주요 생분해 파라미터를 도출하기 위하여 microcosm 규모의 배치실험에서 BTEX 화합물에 대해 분해능이 우수한 Pseudomonas aeruginosa을 이용해 다양한 농도의 벤젠에 대한 분해기작을 고찰하였다. 벤젠의 생분해율(D)과 Maximumspecific growth rate ($\mu$$_{max}$)는 기질의 농도가 증가할수록 높아지다가 최고점에 도달 후에 점차적으로 감소하였으며 이것은 어느 한계점 이상의 벤젠 농도가 미생물의 생분해에 방해 요소로 작용한다는 것을 나타낸다. 그러나 미생물에 의한 벤젠 분해의 상관관계를 나타내는 yield coefficient(Y)는 벤젠의 초기 농도가 낮을수록 높은 값을 나타내었다. Microbial decay constant( b)와 half-saturation constant(K$_{c}$)는 각각 0.21~0.48day$^{-1}$와 218mg/$\ell$로서 문헌값 보다 높은 수치를 나타내었다. 실험으로부터 결정된 생분해 파라미터들은 초기 벤젠 농도에 따라 큰 차이를 보이므로 생분해 모델링에 사용할 파라미터는 기질농도에 따라 적절하게 선택되어야 한다고 사료된다.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2000.11a
• /
• pp.167-170
• /
• 2000

The purpose of study is to evaluate the effects of physical parameters on diesel biodegradation in diesel contaminated soil. The parameters applied are concentration, temperature, moisture contents, electron acceptor(O$_2$). The results of this study showed that diesel were degraded faster at high temperature and moisture contents than at low temperature and moisture content. However concentration effect study indicates that diesel were more faster degraded at low concentration than at high concentration. The results of electron acceptor test showed concentration of oxygen did not affect the biodegradation rate of diesel in oxygen condition(10, 20%) of this study.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2005.04a
• /
• pp.371-374
• /
• 2005

We accomplished optimization for pump and treat (P&T) designs in consideration of degradation processes such as retardation and biodegradation, which are significant for contaminant fate in hydrogeology. For more desirable remediation, optimal pumping duration and minimum pumping rate constraint problems are studied. After a specific P&T duration, it replaces the P&T with the enhanced natural attenuation (ENA), which induces aerobic biodegradation by maintaining oxygen concentration. The design in this strategy carries out the optimization for the number and locations of oxygen injection wells.

• Microbiology and Biotechnology Letters
• /
• v.22 no.2
• /
• pp.158-163
• /
• 1994

Microorganisms capale of utilizing linear alkylbenzene sulfonates(LAS) as sole carbon source were isolated from industrial effluent by using LAS agar plates. The isolated strains were identified as Salmonella sp(BC-2) and Escherichia sp.(BC-3) from the results of morphological, cultural and biochemical tests. The optimal condition for the growth and biodegradation of LAS was the initial pH 7.0 and LAS concentration 0.1%. The isolated BC-2 and BC-3 strains harbored plasmid and LAS-degrading activity was lost when the plasmids were cured by mitomycin C. The plasmids were transformed into E. coli and transformants have the LAS-degrading activity. Isolated strains were examined for primary biodegradation rate of LAS in the medium by methylene blueactive substance(MBAS) method. Of these isolates, BC-2 and BC-3 strains degradated LAS upto 60% and high resistant to CdCl$_{2}$ and HgCl$_{2}$. Isolated strains were sensitive to chloramphenicol, kanamycin, rifampicin, streptomycin and tetracycline but resistant to ampicillin and lincomycin.] Its minimal inhibitory concentration(MIC) for ampicillin was more than 1500 $\mu $g/ml.

• Biotechnology and Bioprocess Engineering:BBE
• /
• v.8 no.5
• /
• pp.294-298
• /
• 2003

Endocrine-disrupting phenolic compounds in the water were degraded by laccase from Trametes sp. followed by activated sludge treatment. The effect of temperature on the degradation of phenolic compounds and the production of organic compounds were investigated using endocrine-disrupting chemicals such as bisphenol A, 2.4-dichlorophenol, and diethyl phthalate. Bisphenol A and 2.4-dichlorophenol disappeared completely after the laccase treatment, but no disappearance of diethyl phthalate was observed. The Michaelis-Menten type equation was proposed to represent the degradation rate of bisphenol A by the lacasse under various temperatures. After the laccase treatment of endocrine-disrupting chemicals, the activated sludge treatment was attempted and it could convert about 85 and 75% of organic compounds produced from bisphenol A and 2.4-dichlorophenol into H$_2$O and CO$_2$, respectively.

• Journal of Environmental Science International
• /
• v.16 no.7
• /
• pp.779-784
• /
• 2007

Dinitrophenol is preventing cells from making energy for growth and it has been suggested that pH may be important in mitigating effects of uncouplers. The effect of pH on toxicity of dinitrophenol at high concentration was investigated, over a pH range of 5.7 to 8.7. DNP inhibition was found to be strongly dependent on mixed liquor pH. The DNP degradation rate was highest in the pH range of 7.0 to 7.8; at pH 6.0 degradation of 0.41 mM dinitrophenol was significantly inhibited; at pH <5.7, dinitrophenol degradation was completely inhibited after approximately 25% of the dinitrophenol was degraded. However no significant effect of pH variation was seen on glucose uptake by the activated sludge mixed culture.

• KSBB Journal
• /
• v.13 no.5
• /
• pp.483-490
• /
• 1998

Two unidentified methanotrophic strains (MM-white and MM-red) secreting soluble methane monooxygenase (sMMO) involved in thrichloroethylene biodegradation have been isolated from mixed methanotrophic consortium (MM) around Taejon area. Subsequently four methanotrophic strains were isolated from MM and named according to their color; white (MS-white), yellow (MS-yellow), pink (MS-pink) and reddish brown (MS-rbrown). All strains except MS-yellow which can take glucose as well as methane, metabolized methane as a sole carbon source. They all showed symbiotic behavior when methane was used as the sole carbon source. Optimum conditions of cell growth for MM were pH of 6.8 - 7.2, temperature of 29 - 32$^{\circ}C$, and gas flow rate of 6 (for methane), 40 (for air), and 4 ml/min (for carbon dioxide). The sMMO activity was expressed as naphthalene oxidation rate (${\mu}$mol/ mg protein/ hr). The sMMO activity for MM grown in flask culture with 1 ${\mu}$M of CuSO4 was 36, while it was 61 without copper. The activity for MM grown in the fermentor without CuSO4 was 1077, but is was 197 after reaction with 5 ppm of TCE. The methanotrophs showed significantly high sMMO activity despite the presence of 1 ${\mu}$M of CuSO4, although most of other strains already known could not express sMMO activity under this condition.

• Journal of Biomedical Engineering Research
• /
• v.16 no.1
• /
• pp.9-16
• /
• 1995

Biodegradable poly (I ,4-butanediol succinate) (PBS) was synthesized from 1,4-butanediol and succinic anhydride. The glass transition temperature of poly (I, 4-butanediol succinate) was revealed at $73^{\circ}C$. The crystallization and cold crystallization of the polymers were investigated as a function of holding time in melt state, cooling rate. reheating, and molecular weight. Chain scission and/or cmsslinking did not occur in the melt state at var.ious holding times. Slower scanning rate can allow more times for nucleation, rearrangement, and packing of the polymer chain, so the onset temperature of crystallization from the melt was increased. PBS crystallized from the melt was found to have spherulitic structure. The degradation behavior of PBS was studied under basic conditions and with microorganisms using the modified ASTM method. In the basic solution. PBS lost up to 85% of its mass within two days. Based upon visual observation, the crystalline structure of films composed of larger molecular weight polymers retained their crystallinity longer than similar structures in low molecular weight samples.

• Journal of Microbiology and Biotechnology
• /
• v.19 no.9
• /
• pp.1028-1033
• /
• 2009

In this study, the dynamics of living cells (LC) and dead cells (DC) in a laboratory-scale biofilm membrane bioreactor for waste gas treatment was examined. Toluene was used as a model pollutant. The bacterial cells were enumerated as fluoromicroscopic counts during a 140 operating day period using BacLight nucleic acid staining in combination with epifluorescence and confocal laser scanning microscopy (CSLM). Overall, five different phases could be distinguished during the biofilm development: (A) cell attachment, (B) pollutant limitation, (C) biofilm establishment and colonization, (D) colonized biofilm, and (E) biofilm erosion. The bioreactor was operated under different conditions by applying different pollutant concentrations. An optimum toluene removal of 89% was observed at a loading rate of 14.4 kg $m^{-3}d^{-1}$. A direct correlation between the biodegradation rate of the reactor and the dynamics of biofilm development could be demonstrated. This study shows the first description of biofilm development during gaseous toluene degradation in MBR.

• Proceedings of the KOSOMBE Conference
• /
• v.1989 no.05
• /
• pp.7-8
• /
• 1989

The graft copolymer of chitosan with amino acid, L-lysine was synthesized by heterogeneous copolymerization and was evaluated as an artificial skin. The mechanical properties under dry and wet state, water content, water vapor transmittance rate and biodegradability were measured. The tensile strength and elongation under wet state ranged $0.3-0.5\;kg/mm^2$, 10-13%, respectively. Water vapor transmittance rate ranged $450-500\;g/m^2{\cdot}day$ like that of the normal skin. The weight loss of prepared membrane by protease IV was measured for the degree of biodegradation. The degree of biodegradation was around 15% and after 4 days it was slow. Biocompatibility was evaluated by studying the attachment of human fibroblast on the prepared membrane surface.