• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1254-1258
• /
• 2007

Electro-active polymer (EAP), one of the smart materials, is a new alternative offering ultra-precise movements and bio-compatibility. We present the results of the design, fabrication, and performance evaluation of a fabricated diaphragm-type polymer actuator using segmented polyurethane(SPU). This paper illustrates the relationship between the elastic modulus and maximum deflection as a key property of the Maxwell stress effect and also presents the relationship between the dielectric constant and maximum deflection as a key property of the electrostriction effect, especially in polymer actuators using SPU. A diaphragm-type actuator was used to induce an equation of the vertically distributed load by using a fully clamped circular plate as the boundary condition. To verify the equation, the results were compared to the data measured from load cell. In the near future, a low-cost check valves and bio-robot can be applied by its actuators.

• 한국고분자학회지:고분자과학과기술
• /
• 제5권6호
• /
• pp.537-543
• /
• 1994

• 대한흉부심장혈관외과학회:학술대회논문집
• /
• 대한흉부외과학회 1993년도 제25차년차학술대회 및 총회
• /
• pp.130-130
• /
• 1993

• 한국유변학회:학술대회논문집
• /
• 한국유변학회 2003년도 춘계학술발표회 논문집
• /
• pp.131-134
• /
• 2003

No Abstract, See Full Text

• Korean Chemical Engineering Research
• /
• 제48권2호
• /
• pp.178-184
• /
• 2010

본 논문에서는 생체적합성 고분자들의 자기 조립 특성을 이용하여 마이크론 단위의 캡슐을 제조하여, 캡슐 내부에 단백질을 넣고 시간과 pH에 따른 방출 거동을 고찰하였다. 본 연구에서는 키토산과 헤파린 그리고 알지네이트를 사용하여 동공(hollow) 캡슐을 제조하였다. 멜라민과 포름알데히드를 일정 비율로 혼합하여, 표면에 전하를 가지는 마이크론 단위의 core를 제조한 후, 음전하를 가지는 헤파린 혹은 알지네이트를 core 위에 흡착시키고, 양전하를 띠는 키토산을 흡착시킨 후, core 위에 교대로 흡착시켜 Multilayer를 형성시켰다. 4 층을 쌓은 후에 HCl을 이용하여 pH 2로 조절하면, core는 제거되고 속이 비어 있는 캡슐을 제조할 수 있었다. 동공 캡슐은 투과전자현미경, 표면주사현미경 및 광학현미경으로 관찰하였다. 이러한 캡슐은 pH에 따라서 각기 다른 거동을 보이는데, 본 연구에서는 내부에 FITC-albumin을 넣어 UV분광기로 방출되는 상대적인 양을 관찰한 결과, 키토산-헤파린 캡슐과 키토산-알지네이트 캡슐은 각기 다른 pH에서 개폐됨을 알 수 있었다.

• Macromolecular Research
• /
• 제14권3호
• /
• pp.267-271
• /
• 2006

Polyelectrolyte complex films were prepared with two compounds, chitosan and poly(ethylene glycol)-monosuccinate, using a casting in order to synthesize a polyelectrolyte complex film with various mole ratios of chitosan and poly(ethylene glycol)-monosuccinate. The solution properties of isolated PEC were investigated for the effects of FTIR, pH value, Brookfield viscosity and cell viability assay using MTT staining. The PEC films were evaluated for mechanical properties by typical stress-strain curve, far thermal properties by DSC and TGA and for surface morphology Properties by SEM. Furthermore, the surface resistance, moisture regain and water content of the films were characterized. The solution properties were affected by several factors including the chitosan content in the PEC, the mixing ratio of PEG and chitosan, and pH. Several PEC in acidic conditions exhibited film formation under appropriate conditions of mixing ratio and chitosan concentration in the mixing process. These PEC films were found to have sufficiently flexible and stable properties due to their hydrophilic structure, which was farmed by the oppositely charged interaction between PEG-MS and chitosan matrix. The results showed the potential applicability of chitosan and poly(ethylene glycol)-monosuccinate films as a biocompatible polymer.

• 한국고분자학회지:고분자과학과기술
• /
• 제24권3호
• /
• pp.254-260
• /
• 2013

• 대한약학회:학술대회논문집
• /
• 대한약학회 2001년도 Proceedings of International Convention of the Pharmaceutical Society of Korea
• /
• pp.227.2-228
• /
• 2001

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제11권6호
• /
• pp.550-552
• /
• 2006

Periosteum-derived progenitor cells (PDPCs) were isolated using a fluorescence-activated cell sorter and their chondrogenic potential in biomaterials was investigated for the treatment of defective articular cartilage as a cell therapy. The chondrogenesis of PDPCs was conducted in a thermoreversible gelation polymer (TGP), which is a block copolymer composed of temperature-responsive polymer blocks such as poly(N-isopropylacrylamide) and of hydrophilic polymer blocks such as polyethylene oxide, and a defined medium that contained transforming growth $factor-{\beta}3\;(TGF-{\beta}3)$. The PDPCs exhibited chondrogenic potential when cultured in TGP. As the PDPCs-TGP is an acceptable biocompatible complex appropriate for injection into humans, this product might be readily applied to minimize invasion in a defected knee.

• 한국정밀공학회지
• /
• 제29권1호
• /
• pp.33-40
• /
• 2012

The scaffold serves as 3D substrate for the cells adhesion and mechanical support for the newly grown tissue by maintaining the 3D structure for the regeneration of tissue and organ. In this paper, we proposed integrated scaffold fabrication system using multi-axis rapid prototyping (RP) technology. It can fabricate various types of scaffolds: arbitrary sculptured shape, primitive shape, and tube shape scaffolds by layered dispensing biocompatible/ biodegradable polymer strands in designated patterns. In order to fabricate the 3D scaffold, we need to generate the plotting path way for the scaffold fabrication system. We design a data processing program - scaffold plotting software, which can convert the 3D STL file, primitive and tube model images into the NC code for the system. Finally, we fabricated the customized 3D scaffolds with high accuracy using the plotting software and the fabrication system.