• 대한환경공학회지
• /
• 제38권9호
• /
• pp.497-503
• /
• 2016

살균기능에 박리와 탈리기능 추가된 비유독물인 친환경살균제를 역삼투(RO)막 부착된 유기물 등 오염물질 제거를 위하여 현장 적용시 역삼투막 차압증가 도달시간을 기준 적용시 평균 93.0%의 개선효율을 보였다, 또한 친환경살균제를 사용한 역삼투막을 Autopsy한 결과, 무기 및 유기오염의 비율이 기존살균제에 비하여 친환경살균제를 사용한 역삼투막이 유기오염의 비율이 적은 것으로 조사됨에 따라 친환경살균제의 바이오필름 제거(분산, 박리) 및 살균력이 기존 약품보다 우수한 것으로 확인되었다.

• 한국미생물·생명공학회지
• /
• 제30권1호
• /
• pp.86-90
• /
• 2002

포항제철소에서 사용하는 살균제와 공장냉각수를 사용하여 실험실에서 생물막 형성과 금속부식에 대한 연구를 수행하였다. 부유성 미생물은 biocide (NaOCl, 0.2％ w/v)을 첨가하면 1.5 시간 내에 모두 사멸하였으나, 생물막에 있는 고착성 미생물은 일주일이 지나도 사멸이 되지 않았다. 생물막 형성은 공장냉각수를 고온고압으로 멸균하거나, biocide(NaOCl)를 첨가하였을 경우에는 주황색의 생물막이 형성되었으나, 공장냉각수를 그대로 사용하였을 경우에는 SRB 활성에 의한 흑색(FeS)의 생물막이 형성되었다. 흑색의 생물막이 형성된 곳에서의 금속부식 속도는 주황색의 생물막이 형성된 곳의 금속부식 속도보다 2.3배 더 빨리 진행되었다.

• 한국물환경학회지
• /
• 제21권4호
• /
• pp.332-336
• /
• 2005

The average specific growth rate of C. reinhardtii (${\mu}$) was decreased with increase in biocide concentrations. The toxicity of biocides toward was as follows (in descending order of toxicities): herbicide 〉 pesticide 〉fungicide. $EC_{50}$ in each biocide was 0.0017 mg/L, 1.06 mg/L and 13.3 mg/L for herbicide, pesticide and fungicide respectively. When herbicide and pesticide were mixed, $EC_{50}$ was decreased by $2.7{\times}10^{-7}mg/L$. $EC_{50}$ in effective components of each biocide was 5.26 mg/L, 9.37 mg/L and 20.58 mg/L for herbicide, pesticide and fungicide respectively. Mixed main components of herbicide and pesticide caused to decrease by 3.10 mg/L.

• 식품산업과 영양
• /
• 제6권2호
• /
• pp.33-39
• /
• 2001

• Corrosion Science and Technology
• /
• 제14권6호
• /
• pp.267-272
• /
• 2015

The performance of three tubular materials (C-90, L-80, and N-80) was evaluated in a synthetic brine inoculated with sulfate-reducing bacteria (SRB) in the absence and presence of biocides. A flow loop was used in the evaluation of the three alloys. Morphological examination of the alloy surfaces after exposure to SRB and after biocide treatment was performed by scanning electron microscopy (SEM) to determine the nature of any localized corrosion. The SE images of the coupon samples showed a marked difference between the biocide-treated and untreated samples. Small pits were observed on the ultrasonically cleaned surfaces of the three alloys after exposure to SRB. The biocide treatment reduced the number of SRB on the surfaces of the alloys. Results indicated that C-90 and L-80 alloys exhibited better MIC resistance than N-80 under the conditions used in this study.

• Journal of the Korean Wood Science and Technology
• /
• 제33권5호통권133호
• /
• pp.50-56
• /
• 2005

The effect of wood material type on biocide retention and distribution during supercritical fluid impregnation was assessed using three different wood types including solid wood, plywood and oriented strand board (OSB). The result revealed that biocide treatability differed with structural composition and permeability of the various materials. Low treatability of plywood might be attributed to interferences of glue line limiting fluid movement. OSB samples showed higher biocide retentions, resulting from the presence of interconnecting gaps permitting more open flow.

• 한국산업보건학회지
• /
• 제23권3호
• /
• pp.169-176
• /
• 2013

Objectives: The aim of this study is to critically review the health effects of not only direct exposure to biocide, but also indirect exposure to by-product hazardous agents generated through the use of biocide in metalworking operations. Methods: An extensive literature review was conducted of studies reporting on respiratory disease cases, particularly hypersensitivity pneumonitis (HP), in environments using water-soluble metalworking fluids (MWFs). Keyword search terms included 'metalworking fluids', 'machining fluids', 'metalworking operation' 'machining operation' and 'biocide', which were also used in combination. Additional articles were identified in references cited in the articles reviewed. Results: Several of the field, epidemiological and experimental studies reviewed assumed that the symptoms and signs typical of HP developed in machinists who handled water-soluble MWF could be caused by inhalation exposure to nontuberculous mycobacteria (NTM). Most NTM are known to be not only resistant to both biocide and disinfectant, but also to have acid-fast cell walls that are highly antigenic. The presence or persistence of the Mycobacterium species, referred to as NTM, in metalworking fluid-using operations may be caused by NTM contamination in either the natural water or tap water that is used to dilute the base oil and additives for water-soluble MWFs. This hypothesis that NTM contamination in water-soluble MWFs is a causative agent of HP has high biologic plausibility, such as antigenic property, hydrophobicity and small diameter (< 5 um). Conclusions: Aerosolized mycobacteria colonized from MWF are likely to be causing the HP. Inhalation exposure to mycobacteria should be considered as a possible cause for the development of HP.

• 대한환경공학회지
• /
• 제30권6호
• /
• pp.609-615
• /
• 2008

본 연구에서는 UV-자유반사 반응조가 장착된 절삭장치와 단독 절삭장치 및 Biocide투입 절삭장치의 각각의 절삭유에 대해서 23주 동안 미생물 개체수와 pH변화, 유분농도 등을 분석하여 절삭유의 장기사용을 위한 각 절삭장치의 효율성에 대한 비교 검토를 하였다. 미생물의 개체수를 조사한 결과 UV 반응조 절삭유가 나머지 2기의 절삭유와 비교해 현저히 낮은 개체수를 보였으며 pH 또한 UV 반응조에서는 9$\sim$8.5를 유지하였으나 단독 절삭장치와 Biocide투입 절삭장치에서는 pH가 현저히 감소하는 경향을 나타내었다. 유분�t량의 경우 역시 절삭기 단독장치와 Biocide투입 절삭장치의 절삭유는 시간의 경과에 따라 유분함량이 거의 없는 상태로 나타나 절삭유로서의 기능을 상실한 것으로 판단되었다. 하지만 UV 반응조의 절삭유의 경우는 4$\sim$3.5 Brix를 유지한 것으로 나타났다.

• ALGAE
• /
• 제29권4호
• /
• pp.311-319
• /
• 2014

The biocide sodium hypochlorite (NaOCl) is widely used for controlling algal growth, and this application can be extended to marine environments as well. This study evaluates the biocidal efficiency and cellular toxicity of NaOCl on the harmful dinoflagellate Cochlodinium polykrikoides, with emphasis on pigment production and antioxidant enzyme activity. The test organism showed dose-dependent decrease in growth rate on exposure to NaOCl, and the 72 h $EC_{50}$ was measured to be $0.584mg\;L^{-1}$. NaOCl significantly decreased pigment levels and chlorophyll autofluorescence intensity, indicating possible detrimental effects on the photosystem of C. polykrikoides. Moreover, it significantly increased the activities of antioxidant enzymes, suggesting the production of reactive oxygen species in the cells. These data indicate that NaOCl exerted deleterious effects on the photosynthetic machinery and induced oxidative damage in the dinoflagellate and this biocide could be effectively used for the control of algal blooms.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.378-378
• /
• 2006

The preparation, characterization, and bio-testing of biocide incorporated silicone coatings for marine applications have been conducted. Derivatives of the biocide, Triclosan (5-chloro-2-(2, 4-dichlorophenoxy) phenol), were used to covalently attach the biocide moiety to a silicone backbone. The synthetic process allowed for control of the resulting coating's mechanical properties as well as antifouling/fouling release performance in laboratory and ocean site testing. The test results showed significantly reduce macro fouling with sustained fouling release characteristics for the coatings produced.