• Journal of agriculture & life science
• /
• v.50 no.1
• /
• pp.273-281
• /
• 2016

In this study, after carrying out a bending test that targeted the frames of plastic film greenhouse, the load-displacement relationship was analyzed to be used as basic data to develop greenhouse construction and maintenance guidelines. As a result, regardless of the shapes of the specimen, the yield and the maximum load increased as the size of the specimen increased. The displacement also showed the same pattern. A steel pipe showed lower yield and maximum load than a square pipe, and the displacement was large. In the steel pipe case, the displacement under the yield and maximum load was in the range of approximately 1.42-4.20mm and 5.80-24.13mm, respectively. In the square pipe case, the displacement under the yield and maximum load was in the range of approximately 1.62-3.00mm and 3.13-8.01mm, respectively. Further, a large difference was observed between the result of this test and the values calculated by a conventionally provided standard. In particular, not much difference was found from the result of this test in the case of a purlin member from the values provided by previous researches. However, a large difference was observed in the column or main rafter members. Furthermore, when a wide-span and venlo type, which is a glasshouse, was used as a target(h/100 and h/80), the displacement under the yield and maximum load was approximately 28.0mm and 35.0mm, respectively, which showed a large difference compared with the Netherlands standard(14.0mm) of a glasshouse. Further, in the main rafter case, a large difference was observed in the displacement limit according to the width(i.e., span) of the greenhouse where members are used. Therefore, because the displacement limit can vary depending on various factors such as type, form, and size of a greenhouse, we determined that studies or tests that consider these factors should be carried out to reflect them in the construction and maintenance of greenhouses.

• Food Science and Preservation
• /
• v.31 no.1
• /
• pp.149-160
• /
• 2024

Dextran is a glucose homo-polysaccharide with a predominantly α-1,6 glycosidic linkage of microbial source and is known to be produced primarily by lactic acid bacteria. However, it can also be obtained through the dextran dextrinase of acetic acid bacteria (Gluconobacter oxydans). The dextrin-based dextran was obtained from rice starch using G. oxydans fermentation of rice hydrolysate, and its properties were studied. Both dextrin- and rice hydrolysate-added media maintained the OD value of 6 after 20 h of incubation with acetic acid bacteria, and the gel permeation chromatography (GPC) analysis of the supernatant after 72 h of incubation confirmed that a polymeric material with DP of 480 and 405, which was different from the composition of the substrate in the medium, was produced. The glucose linkage pattern of the polysaccharide was confirmed using the proton nuclear magnetic resonance (¹H-NMR) and the increased α-1,4:α-1,6 bond ratio from 0.23 and 0.13 to 1:2.37 and 1:4.4, respectively, indicating that the main bonds were converted to α-1,6 bonds. The treatment of dextrin with a rat-derived alpha-glucosidase digestive enzyme resulted in a slow release of glucose, suggesting that rice hydrolysate can be converted to dextran using acetic acid bacteria with glycosyltransferase activity to produce high-value bio-materials with slowly digestible properties.

• Korean Journal of Poultry Science
• /
• v.40 no.1
• /
• pp.75-81
• /
• 2013

This experiment was conducted to investigate the effects of bacteriophage SE supplementation on growth performance, nutrient digestibility, blood profiles, visceral organ weight, meat quality and excreta microflora in broilers. A total of 340 1-d-old ROSS 308 broilers (mixed gender) with an initial average body weight (BW) of $41.71{\pm}0.16$ g were randomly allotted to 4 treatments with 5 replicate pens per treatment and 17 broilers per pen for 31 days. Dietary treatments were: 1) CON, control diet, 2) SE05, CON+0.05% bacteriophage, SE 3) SE10, CON+0.10% bacteriophage SE, and 4) SE15, CON+0.15% bacteriophage SE. During d 15 to 31, broilers fed SE15 diet had a higher (P<0.05) body weight gain than broilers fed CON diet. Overall, body weight gain in SE10 and SE15 was greater (P<0.05) than that in CON. Apparent total tract nutrient digestibility and blood characteristics did not differ (P>0.05) among treatments. The water holding capacity was increased (P<0.05) in SE15 compared with CON. Other meat quality in terms of pH value, breast muscle color ($L^*$, $a^*$, $b^*$) and drip loss were unaffected by dietary supplementation with bacteriophage SE. The visceral weight of bursa of Fabricius was increased (P<0.05) in broilers fed the bacteriophage SE incorporated diets compared with those fed the CON diet. No difference (P>0.05) was observed in visceral weight of liver, spleen, breast muscle, abdominal fat, gizzard and excreta concentrations of Lactobacillus, Clostridium perfringens, Escherichia coli, and Salmonella. In conclusion, dietary supplementation with 0.10 and 0.15% bacteriophage SE could improve the growth performance, breast muscle water holding capacity and bursa of Fabricius visceral weight in broilers.

• Journal of Bio-Environment Control
• /
• v.22 no.4
• /
• pp.291-297
• /
• 2013

The objective of this study was to know the growth response and light use efficiency of leaf lettuce (Lactuca sativa L.) 'Yorum Cheongchukmyeon' (green leaf lettuce) and 'Hongyom Jeokchukmyeon' (red leaf lettuce) under different RGB (Red:Green:Blue) ratio in a closed-type plant factory system. The plants were hydroponically cultured with a 12-h photoperiod at $20{\sim}25^{\circ}C$, 60~70% RH and 600~900 ${\mu}mol{\cdot}mol^{-1}$ $CO_2$. The light treatments were combined in three colors LEDs (red, blue, and white) and RGB ratios (1 : 4 : 5, 5 : 0 : 5, 5 : 2 : 3, 7 : 0 : 3, 7 : 1 : 2, and 8 : 1 : 1), however, as the light intensities of treatments were different. Growth characteristic response in both lettuces were significantly as affected by interaction between cultivar and light quality, when they were grown under different light quality conditions. Plant heights of green and red leaf lettuce were the lowest in 1 : 4 : 5 and 8 : 1 : 1, respectively. The highest length and number of leaf were showed 8 : 1 : 1 and 7 : 0 : 3 for the green and 5 : 2 : 3 and 8 : 1 : 1 for the red, respectively. Shoot dry weights of green and red leaf lettuce were the heaviest in 7 : 0 : 3 and 8 : 1 : 1, respectively. Leaf width and leaf shape index were significant about cultivar and light quality. Leaf widths of green and red leaf lettuce were the largest in 8 : 1 : 1 and 5 : 2 : 3, respectively. Leaf shape index of green and red leaf lettuce were the largest in 1 : 4 : 5 and 1 : 4 : 5, respectively. Shoot fresh weight and light use efficiency were significant about cultivar and light quality. Shoot fresh weights of green and red leaf lettuce were the heaviest in 7 : 0 : 3 and 8 : 1 : 1, respectively. Light use efficiencies of green and red leaf lettuce were the highest in 7 : 0 : 3 and 5 : 0 : 5, respectively. These results suggested that the ratio of RGB was 5~7 : 0~2 : 1~3 to cultivate leaf lettuce in a plant factory system.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.38 no.2
• /
• pp.106-111
• /
• 2018

This study was conducted to investigate the relationship between changes of rumen microflora and bloat in Jersey cow. Jersey cows (control age: 42 months, control weight: 558kg; treatment age: 29 months, treatment weight 507kg) were fed on the basis of dairy feeding management at dairy science division in National Institute of Animal Science. The change of microbial population in rumen was analyzed by using next generation sequencing (NGS) technologies due to metabolic disease. The diversity of Ruminococcus bromii, Bifidobacterium pseudolongum, Bifidobacterium merycicum and Butyrivibrio fibrisolvens known as major starch fermenting bacteria was increased more than 36-fold in bloated Jersey, while cellulolytic bacteria community such as Fibrobacter succinogenes, Ruminococcus albus and Ruminococcus flavefaciens was increased more than 12-fold in non-bloated Jersey. The proportion of bacteroidetes and firmicutes was 33.4% and 39.6% in non-bloated Jersey's rumen, while bacteroidetes and firmicutes were 24.9% and 55.1% in bloated Jersey's. In conclusion, the change of rumen microbial community, in particular the increase in starch fermenting bacteria, might have an effect to occur the bloat in Jersey cow.

• Journal of Bio-Environment Control
• /
• v.8 no.2
• /
• pp.75-82
• /
• 1999

This study was carried out to examine the effect of day/nignt temperatures during seedling culture on the vegetative and reproductive growth of Lycopersicum esculentum ‘Seokwang’. The study was consisted of two culture stages, plug seedling production in the growth chamber and hydroponic culture of the plant in a glasshouse. Experiments were replicated over time. The germinated seedlings were raised for 33 days (experiment 1) and 35 days (experiment 2) in 4 growth chambers, each with day/night temperatures of either $25^{\circ}C$/$25^{\circ}C$, 16$^{\circ}C$/16$^{\circ}C$, 16$^{\circ}C$/$25^{\circ}C$ or $25^{\circ}C$/16$^{\circ}C$. Cool-white fluorescent lamps provided 140$\mu$mol.m$^{-2}$ .s$^{-1}$ light for 12h each day. In the second experiment, all chambers were supplied with 1000$\mu$mol.mol$^{-1}$ CO$_{2}$ during the photoperiod and had an air velocity of 0.3m.s$^{-1}$ and relative humidity of 80%. Plug seedlings raised were transplanted to rockwool slabs in a glasshouse and were grown hydroponically using the same nutrient solutions used for seedling culture for 37 days (experiment 1) and 35 days (experiment 2). Plant height was affected more by mean daily temperature than by interaction of day and night temperatures. Plant height was the highest in 16/16$^{\circ}C$ treatment. Leaf count was not affected by day and night temperatures, and the chlorophyll concentration was the highest in 16/$25^{\circ}C$ treatment. Fresh and dry weights of stem tended to be greater in treatments of constant day and night temperature. The number of node on which first and second flower clusters were set was significantly higher in 25/$25^{\circ}C$ treatment than in the other treatments. Days to flower of the first flower on the first flower cluster were the greatest in 25/$25^{\circ}C$ and the least in 16/$25^{\circ}C$ treatment. Vegetative and reproductive growth, such as height, fresh and dry weights, days to flower, and nodes of the 1st and 2nd flower cluster set were affected by day/night temperatures.

• Applied Biological Chemistry
• /
• v.40 no.1
• /
• pp.34-38
• /
• 1997

For the effective production of functional oligosaccharides(DP 3-5) from inulin in chicory extracts, the acid hydrolysis and enzymatic endo-inulinase reaction were compared. Acid hydrolysis was unfavorable ; the content of oligosacharides in total sugar increased to 26.0% for 12 min at $55^{\circ}C$ and 24.6% at 6 min at $65^{\circ}C$ and showed little change for 30 min. The content of high DP(DP 6) decreased from 83.5 to 49.5% and 23.0% for 30 min, repectively. Glucose, fructose and sucrose increased to 24.6% and 50.3%, respectively. Hydrolysis of chicory extracts with purified endo-inulinase from Arthrobacter sp. S37 was carried out at $40^{\circ}C$ and pH 7.5 for 44 hrs. The content of high DP($DP{\geq}6$) in total sugar decreased from 83.5 to 23.0% and that of inulobiose(F2) and DP 3-5 increased to 66.1%. Glucose, fructose and sucrose were not produced. The hydrolysis of chicory extracts without DP 1 and DP 2 with crude or with purified enzyme were also carried out. In contrast to the hydrolysate of crude enzyme, that of purified endo-inulinase did not contain glucose, fructose, sucrose, F2 and 1-kestose(GF2). The content of oligosaccharides in the hydrolysate of the purified endo-inulinase were 79.2%, composed mainly of inulotriose(F3), inulotetraose(F4) and inulopentaose(F5), which shows that the enzymatic hydrolysis using purified endo-inulinase from Arthrobacter sp. S37 is the best method for oligosaccharides production from inulin in chicory extracts.

• Journal of Bio-Environment Control
• /
• v.25 no.2
• /
• pp.106-110
• /
• 2016

In this study, a planting density-growth-harvest (PGH) chart was developed to easily read the growth and harvest factors such as crop growth rate, relative growth rate, shoot fresh weight, shoot dry weight, harvesting time, marketable rate, and marketable yield of common ice plant (Mesembryanthemum crystallinum L.). The plants were grown in a nutrient film technique (NFT) system in a closed-type plant factory using fluorescent lamps with three-band radiation under a light intensity of $140{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ and a photoperiod of 12 h. Growth and yield were analyzed under four planting densities ($15{\times}10cm$, $15{\times}15cm$, $15{\times}20cm$, and $15{\times}25cm$). Shoot fresh and dry weights per plant increased at a higher planting density until reached an upper limit and yield per area was also same tendency. Crop growth rate, relative growth rate and lost time were described using quadratic equation. A linear relationship between shoot dry weight and fresh weights was observed. PGH chart was constructed based on the growth data and making equations. For instance, with within row spacing (= 20 cm) and fresh weight per plant at harvest (= 100 g), we can estimate all the growth and harvest factors of common ice plant. The planting density, crop growth rate, relative growth rate, lost time, shoot dry weight per plant, harvesting time, and yield were $33plants/m^2$, $20g{\cdot}m^{-2}{\cdot}d^{-1}$, $0.27g{\cdot}g^{-1}{\cdot}d^{-1}$, 22 days, 2.5 g/plant, 26 days after transplanting, and $3.2kg{\cdot}m^{-2}$, respectively. With this chart, we could easily obtain the growth factors such as planting density, crop growth rate, relative growth rate, lost time and the harvest factors such as shoot fresh and dry weights, harvesting time, marketable rate, and marketable yield with at least two parameters, for instance, planting distance and one of harvest factors of plant. PGH charts will be useful tools to estimate the growth and yield of crops and to practical design of a closed-type plant production system.

• Korean Journal of Poultry Science
• /
• v.40 no.4
• /
• pp.283-290
• /
• 2013

This experiment was conducted to investigate the effects of dietary bacteriophage CP supplementation on growth performance, nutrient digestibility, blood profiles, visceral organ weight, meat quality and fecal microflora in broilers. A total of 340 1-d-old ROSS 308 broilers (mixed gender) with an initial average body weight (BW) of $41.14{\pm}0.17g$ were randomly allotted to 4 treatments with 5 replicate pens per treatment and 17 broilers per pen for 31 days. Dietary treatments were: 1) CON, control diet, 2) CP05, CON + 0.05% bacteriophage CP, 3) CP10, CON + 0.10% bacteriophage CP and 4) CP15, CON + 0.15% bacteriophage CP. During d 15 to d 31, broilers fed CP15 diet had higher (P<0.05) body weight gain and feed intake than broilers fed CON diet. Overall, body weight gain in CP10 and CP15 treatment groups was greater (P<0.05) than that in CON treatment and feed intake was higher (P<0.05) in CP15 treatment than that in CON. Apparent total tract nutrient digestibility and blood characteristics did not differ (P>0.05) among treatments. The water holding capacity of breast meat increased (P<0.05) in broiler fed the diets containing bacteriophage CP compared with those fed the CON diet. Other meat characteristics such as pH value, breast muscle color ($L^*$, $a^*$, $b^*$) and drip loss were unaffected by dietary supplementation of bacteriophage CP. The weight of bursa of Fabricius increased (P<0.05) in CP05 when compared with CON. No significant difference was observed (P>0.05) among treatments in visceral weight and fecal microflora concentrations of Lactobacillus spp., Clostridium perfringens, Escherichia coli and Salmonella spp. In conclusion, dietary supplementation with 0.10 and 0.15% bacteriophage CP could improve the growth performance.

• Journal of Bio-Environment Control
• /
• v.20 no.2
• /
• pp.123-133
• /
• 2011

The objective of this study was to find optimal nutrient condition of container seedling production of two tropical species for high seedling quality. This study was conducted to investigate photosynthesis, chlorophyll fluorescence, chlorophyll contents, and growth performances of container seedlings of Eucalyptus pellita and Acacia mangium growing under four different fertilization treatments (Con., $0.5\;g{\cdot}l^{-1}$, $1.0\;g{\cdot}l^{-1}$, and $2.0\;g{\cdot}l^{-1}$ fertilization). E. pellita showed outstanding photosynthetic capacity, photochemical efficiency, and chlorophyll contents at $1.0\;g{\cdot}l^{-1}$ fertilization. Meanwhile, E. pellita showed the highest photosynthetic capacity, photochemical efficiency, and chlorophyll contents at $2.0\;g{\cdot}l^{-1}$ fertilization, as fertilization rate were increased, those of A. mangium increased. Like physiological characteristics, Both E. pellita at $1.0\;g{\cdot}l^{-1}$ fertilization and A. mangium at $2.0\;g{\cdot}l^{-1}$ fertilization were higher root collar diameter, height, biomass, and seedling quality index than other treatments. These results showed that E. pellita at $1\;g{\cdot}l^{-1}$ fertilization and A. mangium at $2.0\;g{\cdot}l^{-1}$ fertilization is optimal nutrient condition, respectively. Moreover, fertilization rate controlling is very important for growth and seedling quality of container seedling.