• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2019년도 학술발표회
• /
• pp.209-209
• /
• 2019

저영향개발기법은 자연의 물순환에 미치는 영향을 최소로 하여 개발하는 것을 의마하며 개발로 인한 토지, 물, 대기에 미치는 영향을 경감시키기 위한 친생태적인 우수관리 혹은 토지개발기법을 의미한다. 국내에서는 2012년부터 가이드라인 및 매뉴얼을 제작하여 신도시개발 및 구도시의 환경사업에서 저영향개발기법을 적용하여 우수유출 저감 및 비점오염원 감소, 물순환 등을 환경적 이점이 나타나고 있다. 그러나 국내에서 적용하는 저영향개발기법은 미국 및 유럽의 시설구조를 적용하였으므로, 국내실정에 맞도록 저영향개발기법을 수정 보완하여 유출저감효과를 모의해보고자 한다. 강우발생시 고농도의 도시비점오염원은 차도 및 보도를 중심으로 유출되어 빗물받이를 거쳐 우수관으로 유입된다. 본 연구에서는 차도와 보도 사이의 식수대에 적용가능하도록 식생수로와 침투도랑을 연계한 식생도랑을 설치하여 도로에서 발생하는 고농도의 비점오염원을 저감하고자 하였다. 선행사례로 적용된 공공청사를 대상으로 모니터링 및 모델링을 실시하여 유출저감 및 비점오염원 저감효과를 검토하고, 식생도랑을 적용할 경우의 유출저감효과 및 비점오염저감효과와 비교검토하여 국내실정에 맞는 저영향개발기법을 개발하고자 한다.

• Advances in environmental research
• /
• 제3권3호
• /
• pp.199-206
• /
• 2014

Dewatering is an extremely important step in wastewater treatment process to reduce the final sludge volume in order to minimize the cost of sludge transportation and disposal. In the present study, the effect of different sludge solids content (1, 2 and 3.8%) on the dewaterability of anaerobically digested sludge using Acidithiobacillus ferrooxidans and Acidithiobacillus thiooxidans was studied. The pH reduction rate was higher during initial process in the sludge having low solids content, but after 48 h of bioleaching, similar pH of below 3 was observed with all the different solids content. Bio-oxidation rate of $Fe^{2+}$ was initially higher in sludge with low solids content, but 100% $Fe^{2+}$ was oxidized within 60 h in all the three treatment levels. Compared to the control, specific resistance to filtration was reduced by 75, 78 and 80% in the sludge with a solids content of 1, 2 and 3.8% respectively, showing improvement in dewaterability with an increase in sludge solids content. Sludge effluent quality and sludge settling rate were also improved in treatments with higher solids content after the bioleaching process.

• Earthquakes and Structures
• /
• 제17권1호
• /
• pp.63-73
• /
• 2019

This paper studies damage detection as an optimization problem. A new objective function based on changes in natural frequencies, and Natural Frequency Vector Assurance Criterion (NFVAC) was developed. Due to their easy and fast acquisition, natural frequencies were utilized to detect structural damages. Moreover, they are sensitive to stiffness reduction. The method presented here consists of two stages. Firstly, Finite Element Model (FEM) is updated. Secondly, damage severities and locations are determined. To minimize the proposed objective function, a new bio-inspired optimization algorithm called salp swarm was employed. Efficiency of the method presented here is validated by three experimental examples. The first example relates to three-story shear frame with two single damage cases in the first story. The second relates to a five-story shear frame with single and multiple damage cases in the first and third stories. The last one relates to a large-scale eight-story shear frame with minor damage case in the first and third stories. Moreover, the performance of Salp Swarm Algorithm (SSA) was compared with Particle Swarm Optimization (PSO). The results show that better accuracy is obtained using SSA than using PSO. The obtained results clearly indicate that the proposed method can be used to determine accurately and efficiently both damage location and severity in multi-story shear frames.

• Membrane and Water Treatment
• /
• 제10권1호
• /
• pp.19-28
• /
• 2019

To minimize the impact of urbanization, accurate performance evaluation of Low Impact Development (LID) facilities is needed. In Korea, the method designed to evaluate large-scale non-point pollution reduction facilities is being applied to LID facilities. However, it has been pointed out that this method is not suitable for evaluating the performance of relatively small-scale installed LID facilities. In this study, a new design formula was proposed based on the ratio of LID facility area and contributing drainage area, for estimating the Stormwater Interception Ratio (SIR) for LID facilities. The SIR was estimated for bio-retentions, infiltration trenches and vegetative swales, which are typical LID facilities, under various conditions through long-term stormwater simulation using the LID module of EPA SWMM. Based on the results of these numerical experiments, the new SIR formula for each LID facility was derived. The sensitivity of the proposed SIR formula to local rainfall properties and design variables is analysed. In addition, the SIR formula was compared with the existing design formula, the Rainfall Interception Ratio (RIR).

• Geomechanics and Engineering
• /
• 제25권1호
• /
• pp.31-40
• /
• 2021

Injection grouting is one of the most common ground improvement practice to increase the strength and reduce the hydraulic conductivity of soils. Owing to the environmental concerns of conventional grout materials, such as cement-based or silicate-based materials, bio-inspired biogeotechnical approaches are considered to be new sustainable and environmentally friendly ground improvement methods. Biopolymers, which are excretory products from living organisms, have been shown to significantly reduce the hydraulic conductivity via pore-clogging and increase the strength of soils. To study the practical application of biopolymers for seepage and ground water control, in this study, we explored the injection capabilities of biopolymer-based grout materials in both linear aperture and particulate media (i.e., sand and glassbeads) considering different injection pressures, biopolymer concentrations, and flow channel geometries. The hydraulic conductivity control of a biopolymer-based grout material was evaluated after injection into sandy soil under confined boundary conditions. The results showed that the performance of xanthan gum injection was mainly affected by the injection pressure and pore geometry (e.g., porosity) inside the soil. Additionally, with an increase in the xanthan gum concentration, the injection efficiency diminished while the hydraulic conductivity reduction efficiency enhanced significantly. The results of this study provide the potential capabilities of injection grouting to be performed with biopolymer-based materials for field application.

• Journal of Industrial and Engineering Chemistry
• /
• 제67권
• /
• pp.469-477
• /
• 2018

We describe surgical sutures enabled with the local, sustained delivery of a TGF-${\beta}$ inhibitory drug, tranilast. To fabricate drug-delivery sutures, we separately prepared a tranilast-loaded strand using poly (lactic-co-glycolic acid), which was then physically braided with a surgical suture already in clinical use. By this method, the drug-delivery sutures maintained the mechanical strength and allowed the modulation of drug release profiles by simply altering the tranilast-loaded strand. The drug-delivery sutures herein released tranilast for up to 14 days. When applied to animal models, scarring was indeed reduced with diminished TGF-${\beta}$ expression and fibroblast numbers during the entire 21 day testing period.

• Journal of Korea Trade
• /
• 제26권2호
• /
• pp.65-83
• /
• 2022

Purpose - The purpose of this study is to evaluate the economic effects of FTAs using the concept of value-added exports. So far, the economic effects of FTAs have been dependent on decrease in import prices due to tariff cuts in importing countries, but the actual tariff reduction need to consider the value added of the exporting countries. Design/methodology - Value-added export refers to the added value created in the exporting country out of total exports. Among value-added exports, direct value-added export is interpreted as the Regional Value Contents (RVC), from which the economic effect of the FTA can be analyzed. A modified GTAP-VA model takes into account RVC in order to estimate accurate effects of FTAs. Findings - By the re-evaluation of the FTA based on the RVC, this paper makes it clear that the economic effects of the existing FTA methodology have the possibility of overestimation. In addition, as a new FTA with a strengthened Rules of Origin (ROO) is being initiated, a negative impact on international trade and GVC utilization may occur. Originality/value - This study introduces the concept of value-added export in analyzing the effects of FTAs. The new analysis methodology of this paper emphasizes the importance of value-added exports. Re-organization of GVCs would change regional trade agreements and empower ROO by weakening existing GVCs and transforming the value chain from global into regional scope.

• 한국기계가공학회지
• /
• 제21권6호
• /
• pp.81-88
• /
• 2022

Titanium alloy (Ti-6Al-4V) has excellent mechanical properties and high specific strength; therefore, it is widely used in aerospace, automobile, defense, engine parts, and bio fields. Particularly in the aerospace field, as it has a low specific gravity and rigidity, it is used for the purpose of increasing energy efficiency through weight reduction of parts, and most have a thin-walled structure. However, it is extremely difficult to machine thin-walled shapes owing to vibration and deformation. In the case of thin-walled structures, the cutting forces and vibrations rapidly increase depending on the cutting conditions, significantly affecting the surface integrity and tool life. In this study, machining experiments on thin-wall milling of a titanium alloy (Ti-6Al-4V) were conducted for each experimental condition with different axial depths of cut, radial depth of cut, and machining sequence. The machining characteristics were analyzed, and an effective machining method was derived by a comprehensive analysis of the machined surface conditions and cutting signals.

• 전력전자학회논문지
• /
• 제27권2호
• /
• pp.165-173
• /
• 2022

The electrification trend of mobility increases every year due to the development of power semiconductor and battery technology. Accordingly, the development and distribution of fast chargers for electric vehicles (EVs) are in demand. In this study, we propose a design and implementation method of an LLC converter for fast chargers. Two 15 kW LLC converters are configured in parallel to have 30 kW rated output power, and the control algorithm and driving sequence are designed accordingly and verified. In addition, the improved power conversion efficiency is confirmed through zero-voltage switching (ZVS) of the LLC converter and reduction of turn-off loss through snubber capacitors. The implemented 30 kW LLC converters show a wide output voltage range of 200-950 V. Experiments applying various load conditions verify the converter performance.

• 한국재료학회지
• /
• 제34권4호
• /
• pp.215-222
• /
• 2024

Because collagen is inherently piezoelectric, research is being actively conducted to utilize it to harvest energy. In this study, a collagen solution was prepared using edible low-molecular-weight peptide collagen powder, and collagen films were fabricated using a dip coating method. The collagen films prepared by dip coating showed a smooth surface without defects such as pinholes or cracks. Dehydrothermal treatment of the collagen films was performed to induce a stable molecular structure through cross-linking. The collagen film subjected to dehydrothermal treatment at 110 ℃ for 24 h showed a thickness reduction rate of 19 %. Analysis of the collagen films showed that the crystallinity of the collagen film improved by about 7.9 % after dehydrothermal treatment. A collagen film-based piezoelectric nanogenerator showed output characteristics of approximately 13.7 V and 1.4 ㎂ in a pressure test of 120 N. The generator showed a maximum power density of about 2.91 mW/m² and an output voltage of about 8~19 V during various human body movements such as finger tapping. The collagen film-based piezoelectric generator showed improved output performance with improved crystallinity and piezoelectricity after dehydrothermal treatment.