• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.23 no.3
• /
• pp.133-141
• /
• 2017

This article described the development of transparent antimicrobial oxo-biodegradable (AOB) film with the function of enhanced freshness of food by employing oxo-biodegradable masterbatch (MB) and antimicrobial MB together with organic metal salt, organic acid, or unsaturated fatty acid. Antibacterial test of the AOB film with the different contents of the antimicrobial MB resulted in the significant freshness extension of plum. Tensile strength and elongation rate of the AOB films before UV treatment were similar to those of polyethylene films used as control. The reduced mechanical properties of AOB film after UV treatment (340 nm) suggested that the AOB film could be degraded by oxo biodegradation. The developed AOB films can effectively prevent decomposition of food by providing antibacterial function and preserving freshness.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.9
• /
• pp.6403-6410
• /
• 2015

Medical polymer PLGA is biocompatible, biodegradation, mechanical characteristic and biostability, and the degradation time can be adjust by controlling the number of monomer. In this paper, PLGA membranes have different composition ratio by L/D type was prepared by phase transition method. And the PLGA membrane in phosphate buffered saline(PBS) at the different test temperatures for different periods of time to examined for change in mass and measured the pH of degradation media. Measurement of Tg and surface structure was performed using a DSC and Stereoscopic microscope. As the molecular weighter increase, hydrolysis rate was decrease in geometrical progression. According to the composition ratio by L/D type, degradation rate and the change of pH are large.

• Journal of the Korean Wood Science and Technology
• /
• v.47 no.5
• /
• pp.547-556
• /
• 2019

Thinned, small larch logs have small diameters and no value-added final use, except as wood chips, pallets, or fuel wood, which are products with very low economic value; however, their mechanical strength is suitable for structural applications. In this study, small larch logs were sawed, dried, and cut into square timbers (with a $90mm{\times}90mm$ cross section) that were laterally glued to form core panels used to manufacture cross-laminated timber (CLT) wall panels. The surface and back of these core panels were covered with 12-mm-thick structural plywood panels, used as cross bands to obtain three-ply CLT wall panels. This attachment procedure was conducted in two different ways: gluing and pressing (CGCLT) or gluing and nailing (NGCLT). The size of the as-manufactured CLT panels was $1,220mm{\times}2,440mm$, the same as that of the plywood panels. The final wall panels were tested under lateral shear force in accordance with KS F 2154. As the lateral load resistance test required $2,440mm{\times}2,440mm$ specimens, two CLT wall panels had to be attached in parallel. In addition, the final CLT panels had tongued and grooved edges to allow parallel joints between adjacent pieces. For comparison, conventional light-frame timber shear walls and midply wall systems were also tested under the same conditions. Shear walls with edge nail spacing of 150 mm and 100 mm, the midply wall system, and the fabricated CGCLT and NGCLT wall panels exhibited maximum lateral resistances of 6.1 kN/m (100%), 9.7 kN/m (158%), 16.9 kN/m (274%), 29.6 kN/m (482%), and 35.8 kN/m (582%), respectively.

• Journal of the Ergonomics Society of Korea
• /
• v.30 no.3
• /
• pp.395-401
• /
• 2011

Objective: This study examined the effects of working chair that was developed for farmers who work in grapevine's cluster thinning. Background: Agricultural work involves some of the nation's highest occupational risk exposures. Fruit cultivation has been recognized as one of the most hazardous crops in which to work. Grapevine cluster thinning task involve activities related to the main risk factors associated with upper limb work-related musculoskeletal disorders. Method: An experiment was designed to test the working chair. Six healthy male($25.8{\pm}4.9years$) were selected as the subjects for this study. Electromyography(EMG) was used to monitor the muscles activity, and Electro-goniometer was used to measure the ranges of motions of the elbow, trunk and knee. Subjective test was also carried out to examine discomfort body parts and their pain intensity. A grapevine's working space was built for the experiment and working chair was installed on it. In order to examine the muscle activity and range of motion, subjects used to the working chair for 30 minutes for each experimental condition. Another test without working chair was also performed for comparison. %MVC was used to quantify the level of muscle activity. Results: Decreases of muscle activity was found in all leg muscles and significant decrease of muscle activity was found in left Gastrocnemius. The range of motion of the trunk and knee also decreased when working chair used. Discomfort in lower back, thigh and shank region were reduced significantly. However, in upper limbs muscle activity tended to increase in working chair compared with conventional task. Conclusion: Improvement for cushion in seat back and pan required to reduce discomfort in buttocks. Application: Overall findings verified that the working chair might help to prevent upper limb and lower back MSDs based on the current study. These results can be practically used for work improvement for the grapevine growers to prevent MSDs.

• Geomechanics and Engineering
• /
• v.12 no.5
• /
• pp.785-801
• /
• 2017

Biopolymer treatment of geomaterials to develop sustainable geotechnical systems is an important step towards the reduction of global warming. The cutting edge technology of biopolymer treatment is not only environment friendly but also has widespread application. This paper presents the strength and slake durability characteristics of biopolymer-treated sand sampled from Al-Sharqia Desert in Oman. The specimens were prepared by mixing sand at various proportions by weight of xanthan gum biopolymer. To make a comparison with conventional methods of ground improvement, cement treated sand specimens were also prepared. To demonstrate the effects of wetting and drying, standard slake durability tests were also conducted on the specimens. According to the results of strength tests, xanthan gum treatment increased the unconfined strength of sand, similar to the strengthening effect of mixing cement in sand. The slake durability test results indicated that the resistance of biopolymer-treated sand to disintegration upon interaction with water is stronger than that of cement treated sand. The percentage of xanthan gum to treat sand is proposed as 2-3% for optimal performance in terms of strength and durability. SEM analysis of biopolymer-treated sand specimens also confirms that the sand particles are linked through the biopolymer, which has increased shear resistance and durability. Results of this study imply xanthan gum biopolymer treatment as an eco-friendly technique to improve the mechanical properties of desert sand. However, the strengthening effect due to the biopolymer treatment of sand can be weakened upon interaction with water.

• Journal of Mushroom
• /
• v.14 no.4
• /
• pp.237-243
• /
• 2016

Spent mushroom substrate (SMS) has generally been used for the manufacture of animal feed and production of bio fuel. Limited research has been conducted in the utilization of SMS as a co-material for composting. Therefore, the main purpose of this study was to evaluate the feasibility of composting vegetable waste mixed with various ratios of SMS (30, 40, and 50%). The results showed that the C/N ratio decreased when both sawdust (from 22.0~28.8 to 17.7~20.4) and SMS (from 18.5~19.5 to 12.7~16.8) were applied for composing, owing to increased contents of nitrogen. A maturity test conducted using mechanical (Solvita) and germination tests revealed that both sawdust (92.0~101.9%) and SMS (87.8~89.2%) satisfied a criteria of maturity standard (70%). A correlation analysis between compost maturity and its chemical properties revealed that the C/N ratio and pH were the most dominant parameters for compost maturity. Overall, SMS could be utilized as a compost material and especially, vegetable waste mixed with SMS could provide sufficient nutrients for crop growth.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.899-904
• /
• 2003

Microarrayer makes DNA chip and microarray that contain hundreds to thousands of immobilized DNA probes on surface of a microscope slide. This paper shows the development results for a printing type of microarrayer. It realizes a typical, low-cost and efficient microarrayer for generating low density microarray. The microarrayer is developed by using a robot of three-axes perpendicular type. It is composed of a computer-controlled three-axes robot and a pen tip assembly. The key component of the arrayer is the print-head containing the tips to immobilize cDNA, genomic DNA or similar biological material on glass surface. The robot is designed to automatically collect probes from two 96-well plates with up to 32 tips at the same time. To prove the performance of the developed microarrayer, the general water types of inks such as black, blue and red. The inks are distributed at proper positions of 96 well plates and the three color inks are immobilized on the slide glass under the operation procedure. As the result of the test, it can be shown that it has sufficient performance for the production of low integrated DNA chip consisted of 96 spots within 1 $cm^2$ area.

• Proceedings of the KOSOMBE Conference
• /
• v.1996 no.05
• /
• pp.207-212
• /
• 1996

We developed pneumatic blood pump and its driving system as a pediatric ventricular assist device. The blood pump is diaphragm type system and its blood contacting area is coated with Bio-Span. The driving unit Is consists of dual pumps, valves for the reliable blood pumping and its controller uses 80C196(Intel) as a main processor. The acute animal experiment was performed with dogs and its body weight is about 20 kg. The maximum cardiac output is about 2.1 l/min and the pressure and flow curves showed reliable operation as assist device.

• Journal of Industrial and Engineering Chemistry
• /
• v.67
• /
• pp.396-406
• /
• 2018

In this study, a polydioxanone (PDO) and poly(L-lactic acid) (PLLA) sheath-core biphasic monofilament was designed to develop an esophageal stent with improved mechanical properties and controlled biodegradability. The radial force of PDO/PLLA sheath-core stent was 10.24 N, while that of PDO stent was 5.64 N. Deteriorations of tensile strength, elastic modulus and elongation during degradation test were also delayed on PDO/PLLA group. Hyaluronic acid-dopamine conjugate and $BaSO_4/PDO$ conjugate coating layers provided improved tissue adhesion strength and reasonable X-ray contrast, respectively. Taken all together, the sheath-core filaments with tissue adhesive and radiopaque properties will be useful in designing esophageal stents.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.54-54
• /
• 2017

본 연구는 무인 헬리콥터의 양력을 개선하기 위한 기초 단계로서 V1505A 및 V2008B 기본 두 익형의 400 mm 블레이드 섹션에 해당하는 모델에 대한 풍동실험을 실시하여 양력, 항력 및 동력특성을 분석하고 CFD 시뮬레이션의 결과와 비교하고 검증하였다. 시뮬레이션은 풍동 실험과 유사하게 설정하기 위하여 400 mm 블레이드 섹션의 양 끝을 벽으로 제한하여 3차원 와류현상을 억제하여 모델을 구성하였고, 시뮬레이션의 결과와 비교하여 모델을 검증하였다. 사용된 모델은 로터로부터 $Re=0.32{\times}10^6$ 영역까지는 aminar 모델을 사용하였으며, 그 이후 영역역(>$Re=0.32{\times}10^6$)은 양력 및 저항의 급격한 변화를 올바로 포착할 수 있다는 S-A 모델을 적용하여 확장하였다. 시뮬레이션의 격자는 유동 현상에 있어 박리로 야기된 와류 현상을 관찰하기 위하여 익형 주변에 접하는 부분에 격자를 집중시켰다. 시뮬레이션 방법은 유속은 36~141 m/s 까지 5 수준으로 하였으며, 받음각은 $0{\sim}16^{\circ}$로 7 수준으로 변화 시키면서 공력계수 및 동력을 분석하였다. 양력분석에 있어 익형 V1505A에 비해 익형 V2008B의 특성이 우수하였으나, 익형 V1505A는 실속 이후 양력이 급격히 떨어지지 않고 유지되는 특성을 보였다. 익형 V2008B는 낮은 받음각에서 높은 공력과 낮은 항력을 나타냈다. 동력 분석 결과로 익형 V1505A의 유도동력은 총 동력의 56~72%를 차지하고, 형상동력은 총 동력의 27~43%를 차지하였다. 익형 V2008B는 유도동력은 총 동력의 66~81%를 차지하고, 형상동력은 총 동력의 18~33%를 차지하였다. 익형 V2008B이 익형 V1505A보다 유도동력은 크며, 형상동력은 적게 나와 상대적으로 효율적이라 할 수 있다. 헬리콥터 동력원의 규모는 법률적인 총중량에 의하여 제한되므로 일반적인 농용 소형 무인 헬리콥터 엔진의 사양인 24.5 kW (32PS)를 적용한다면, 익형 V1505A은 받음각 $8{\sim}10^{\circ}$에서 그리고 익형 V2008B은 $7{\sim}9^{\circ}$정도에서 받음각이 제한되며 이때 총 양력은 1200~1300 N 정도로 예상된다.