• 제목/요약/키워드: Bio-film

검색결과 441건 처리시간 0.044초

Characteristics of Biodegradable Films and Their Effects on Soybean Growth

  • Ye Geon Kim;Hyo Jin Lee;Do Jin Lee;Yong In Kuk
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2022년도 추계학술대회
    • /
    • pp.50-50
    • /
    • 2022
  • Recently, the use of mulching film has increased in soybean cultivation. Polyethylene (PE) films and biodegradable films (BF) have the advantages of improving soil moisture retention, geothermal maintenance, and CO2 maintenance as well providing weed control. Furthermore, BFs are a material that can compensate for the shortcomings of PE because it has the ability to decompose naturally by soil microorganisms, sunlight, and geothermal heat. Many researches have been carrying out studies regarding the development of BFs for these very reasons. This study was conducted better understand which films are optimal for soybean cultivation after evaluations of soybean growth and film characteristics of various BFs. BFs Farmsbio (Farm Hannong), Heulgro Film (Sejin Bio), Vonto Film (Eco-Hansung), two unnamed biodegradable films (Seojin Bio and Taesung), and a PE film were used in this study. For the control plots, no mulching was used. Experimental fields were fertilized according to conventional cultivation methods, tilled, and then covered with either BFs or PE films. After 1 week, soybean (cv. Daechan) seeds were seeded. Germination rate and plant height were measured at weekly intervals after seeding. In addition, pH, EC, and decomposition and light transmittance levels of films were measured during the experimental period. Daily average temperatures and relative humidity in soils was measured during the experimental period. There was no significant difference in germination rates and plant height in both crops grown with BFs and PE films, but crops grown in the control plot had significantly lower germination rates and growth. Soil pH was not significantly different regardless of treatments (BF, PE, and non-mulching) at 14, 28, and 42 days after seeding. In general, the EC contents in the control plots was lower than in crops grown using BFs and PE films. With the exception of some BFs, light transmittance and decomposition levels of films did not, in general, increase up to 70 days after soybean seeding. Since this study is ongoing, we are continually investigating these parameters. The average daily moisture in soil was higher in crops grown with BFs and PE films than in the control plot. However, the daily average soil temperature was not consistent regardless of treatments. Therefore, the BFs used in this study can be used without negative impacts on soybean growth.

  • PDF

농산부산물인 옥피, 대두피, 왕겨, 소맥피를 이용한 산화생분해 바이오플라스틱 필름 개발 (Development of Oxo-biodegradable Bio-plastics Film Using Agricultural By-product such as Corn Husk, Soybean Husk, Rice Husk and Wheat Husk)

  • 유영선;김미경;박명종;최성욱
    • 청정기술
    • /
    • 제20권3호
    • /
    • pp.205-211
    • /
    • 2014
  • 식물로부터 유래하는 바이오매스를 25% 이상 함유하는 바이오 베이스 플라스틱은 탄소배출을 억제하는 효과가 있고, 한정된 자원인 석유의 소비량을 줄일 수 있으며, 산화생분해 첨가제를 추가 적용하면 폐기 후에는 미생물에 의해 생분해(Biodegradable)되기 때문에 친환경적인 소재이다. 본 연구에서는 폴리에틸렌에 산화생분해 첨가제, 4종류 식물체 바이오매스, 불포화 지방산, 구연산을 첨가하여 생분해성 및 물성변화를 관찰하였다. 초기 신장율과 인장강도 등의 물성이 우수한 자연에 분해되는 바이오 플라스틱 필름을 제조하여 식품포장재로서의 제품 안전성을 시험하였다. 옥피, 대두피, 왕겨, 소맥피의 식물체를 Air classifying mill로 분체한 후, 저밀도 폴리에틸렌, 선형저밀도 폴리에틸렌, 기타 첨가제를 고속혼합기에서 혼합한 후, 호퍼에 투입한 다음 용융혼합하면서 다이스로 압출하여 4 가지 다른 형태의 두께 $50{\mu}m$의 바이오 필름을 제조하였다. 기계적 물성으로 인장강도 및 신장율을 측정하였으며, 생분해 실험을 실시하였다. 옥피, 대두피, 왕겨, 소맥피로 제조된 필름 중 소맥피로 제조된 필름의 인장강도 및 신장율이 가장 좋은 것으로 나타났다. 또한 산화생분해 시험방법에 의해 45일간 생분해 테스트를 한 결과 표준물질인 셀룰로오스 분말 대비 51.5%의 생분해를 나타내었다.

비닐하우스내 토양 피복이 스타티스 절화품질에 미치는 영향 (Effect of Soil Mulching on the Cut Flower Quality of Statice Plants Grown in Plastic House)

  • 정성수;김정만;정종성;최창학;최정식;김형무
    • 생물환경조절학회지
    • /
    • 제6권1호
    • /
    • pp.43-47
    • /
    • 1997
  • 본 시험은 시설내에서 미스티블루 재배시 잡초의 발생을 억제하고 절화의 품질을 향상시키고자 피복재료(볏짚, 투명 polyethylene film 및 흑색 polyethylene film)를 공시하여 그 효과를 구명하고자 실시하였는데 지온의 변화를 4월부터 10월까지 조사한 결과 볏짚피복한 것과 흑색비닐 피복한 것은 온도 상승과 하강이 완만하였으나 투명비닐과 무피복구는 온도 변화가 심하였다. 고온기인 7월과 8월의 지온은 무피복구와 투명비닐피복구가 3$^{\circ}C$ 이상 높았다. 피복재료별 잡초발생량은 흑색비닐 피복구가 타피복구나 무피복구에 비해 현저히 적어 잡초발생억제 효과가 큰 것으로 나타났다. 피복처리별 초기의 생육상황을 조사한 결과 흑색비닐피복구가 초장에서 약간 양호하였으나 엽장 등 생육은 큰 차이가 없었다. 화수폭, 화경경, 절화장 및 절화중 등은 흑색비닐피복구가 타처리구에 비해 양호하여 절화품질이 우수한 것으로 나타났다. 피복재료별 1등급 절화비율과 상품화율도 흑색비닐피복구가 90.5%와 81.8%로서 타처리구에 비해 양호한 것으로 나타났다.

  • PDF

자외선 조사가 Poly (ethylene naphthalate) film의 광가교에 미치는 영향 (The effect of UV Irradiation on the Photo-crosslinking of Poly (ethylene naphthalate) film)

  • 장용준;장진호
    • 한국염색가공학회:학술대회논문집
    • /
    • 한국염색가공학회 2011년도 제45차 학술발표회
    • /
    • pp.29-29
    • /
    • 2011
  • 폴리에스테르는 많은 분야에서 응용되어 사용되어지고 있으나 최근 더욱 우수한 물성이 각 분야에서 요구되어 지고 있다. Poly (ethylene naphthalate)(PEN)는 PET 주쇄의 벤젠고리에 나프탈렌으로 치환되어 강직성이 강화되어 PET보다 약 $50^{\circ}C$정도 높은 $T_g(117^{\circ}C)$$10^{\circ}C$정도 높은 $T_m(265^{\circ}C)$을 가져서 열적 안정성, 고강도와 저신도를 갖는다. PEN은 상대적으로 우수한 내열성과 환경호르몬을 포함하지 않아 인체에 무해하다는 이점 때문에 수유병이나 머그컵으로도 사용되어질 수 있다. 또한 탄산음료 용 bottle이나 맥주 bottle등은 높은 barrier성이 요구되어지기 때문에 PET에 비해 약 5배 높은 barrier 성을 가지는 PEN을 블렌드하여 사용하기도 한다. PEN의 내열성 및 기계적 강도를 더욱 우수하게 하고자 고분자 사슬을 가교할 수 있는데, 가교에는 열처리 또는 감마선, 전자선, 자외선 조사를 이용할 수 있는데 열에 의한 가교는 균일한 열전달과 고온이 필요하며 감마선 및 전자선 조사는 설비의 고비용과 방사선 노출 위험으로 인해 비친환경적이다. 반면에 자외선 조사법은 다루기 쉽고 비용이 적게 들고 친환경적인 장점을 가진다. 본 연구에서는 PEN film의 열안정성과 기계적 특성을 향상시키기 위해 자외선 조사를 이용하여 PEN film의 광가교를 수행하였다.

  • PDF

어븀-실리사이드를 이용한 쇼트키 장벽 다결정 실리콘 박막 트랜지스터 (Schottky barrier poly-Si thin film transistor by using erbium-silicided source and drain)

  • 신진욱;구현모;정명호;최철종;정원진;조원주
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2007년도 추계학술대회 논문집
    • /
    • pp.75-76
    • /
    • 2007
  • Poly-Si Schottky barrier Thin Film Transistor (SB-TFT) is manufactured with erbium silicided source/drain. High quality poly-Si film was obtained by crystallizing the amorphous Si film with Excimer laser annealing (ELA) method. The fabricated poly-Si SB-TFT devices showed low leakage current and large on/off current ratio. Moreover, the electrical characteristics were considerably improved by 3% $H_2/N_2$ gas annealing, which is attributed to the reduction of trap states at the grain boundaries and interface trap states at gate oxide/poly-si channel.

  • PDF

편광 간섭을 이용한 광도파로 기반의 표면 굴절률 센서 (Polymer Waveguide Based Refractive Index Sensor Using Polarimetric Interference)

  • 손근식;권순우;김우경;양우석;이형만;이한영;이성동;이상신
    • 한국광학회지
    • /
    • 제19권3호
    • /
    • pp.193-198
    • /
    • 2008
  • 본 논문에서는 폴리머 광도파로 상부에 $TiO_2$(Titanium dioxide)박막이 증착된 굴절률 센서를 구현하였다. 제작된 센서를 이용하여 글리세롤의 굴절률 변화에 따른 출력광의 편광 간섭 변화를 측정하였다. 또한 박막 두께에 따른 편광 간섭의 민감도 변화를 확인하고, 수치해석 결과와 비교하였다. 특히 $TiO_2$가 20 nm 증착된 광도파로에서 $2{\pi}$의 위상차를 갖는 굴절률 변화는 $1.8{\times}10^{-3}$이다.

반사필름 멀칭이 토마토의 기공특성, 증산속도, 광합성속도에 미치는 영향 (Effect of Reflective Film Mulching on the Stomatal Features, Transpiration Rate and Photosynthetic Rate of Tomato Plants in Greenhouse Cultivation)

  • 조일환;김완순;허노열;권영삼
    • 생물환경조절학회지
    • /
    • 제6권4호
    • /
    • pp.292-298
    • /
    • 1997
  • 본 연구에서는 반사필름 멀칭과 북측면의 반사판설치에 의한 보광이 토마토의 광이용에 미치는 영향을 밝히기 위해 토양 및 수경재배를 통해 토마토의 엽온변화, 기공특성, 증산.광합성속도 등의 변화들을 중심으로 검토하였다. 보광 처리에 의해 토마토엽의 기공밀도는 증가하였으나 기공의 크기와 면적은 차이가 얼었다. 근권부의 삼투포텐셜이 낮으면 광반사에 의한 기공저항이 컸고 증산속도는 낮았으며 엽온은 40.62$^{\circ}C$까지 상승했다. 또한 보광에 의해 광합성속도도 저하했으나 엽록소 함량에는 차이가 없었다. 반사필름 멀칭으로 온실가루이의 기피효과는 있었다 약광기 동절기에 반사필름 멀칭 등의 보광처리에 의한 증수나 품질향상은 엽의 기공밀도의 증가로 활발한 증산 .광합성작용으로 체내의 물질대사나 생장에 영향을 주고 그 결과 간접적으로 무기성분의 흡수나 분배에 영향을 주어 생육 및 수량 둥이 양호했다고 생각된다.

  • PDF