• 제목/요약/키워드: Bio-carbon

검색결과 667건 처리시간 0.024초

미이용 바이오매스의 이산화탄소 활성화를 통한 바이오카본 생산: 포름알데하이드 및 아세트알데하이드 제거 특성 (Production of Bio-Carbon from Unused Biomass through CO2 Activation: Removal Characteristics of Formaldehyde and Acetaldehyde)

  • 김종수;최석천;이은도;박은석;정수화
    • 청정기술
    • /
    • 제27권4호
    • /
    • pp.325-331
    • /
    • 2021
  • 본 연구에서는 미이용 바이오매스인 3급 목재펠렛 및 커피박을 이용하여 바이오카본을 생산하고 이를 통하여 저분자 극성 휘발성 유기화합물인 포름알데하이드 및 아세트알데하이드 제거 성능 실험을 수행하였다. 바이오카본 생산 실험은 이산화탄소를 활성화제로 사용하여 고정층 반응기에서 수행하였다. 활성화 실험 시 반응온도 900 ℃ 및 이산화탄소 1 L min-1으로 반응조건을 고정하여 진행하였다. 활성화 실험 결과 1급 목재펠렛으로부터 생산한 바이오카본의 BET 비표면적이 약 788 m2 g-1으로 가장 높음을 알 수 있었고 커피박으로부터 생산한 바이오카본이 약 544 m2 g-1으로 가장 낮게 나타났다. 본 실험을 통해 생산된 바이오카본은 대부분 마이크로 기공을 가진 것으로 나타났다. 바이오매스 원료 내 회분의 함량이 낮을수록 바이오카본의 비표면적이 높아지는 것으로 나타났다. 포름알데하이드 및 아세트알데하이드 제거 실험 결과 1급 및 3급 목재펠렛으로 부터 생산한 바이오카본에 비해 커피박으로부터 생산한 바이오카본이 더욱 우수한 흡착 성능을 보여주었다. 추가적으로 상용 첨착 활성탄과 커피박으로부터 생산한 바이오카본의 비교 실험을 진행하였다. 포름알데하이드 제거 성능은 상용 첨착 활성탄이 우수한 반면 아세트알데하이드 제거에는 커피박으로부터 생산한 바이오카본이 우수한 것으로 나타났다.

수질 환경을 고려한 농경지 토양 탄소 관리 방안 (Agricultural Soil Carbon Management Considering Water Environment)

  • 이경숙;윤광식;최동호;정재운;최우정;임상선
    • 환경영향평가
    • /
    • 제22권1호
    • /
    • pp.1-17
    • /
    • 2013
  • Carbon sequestration on soil is one of the counter measurements against climate change in agricultural sector. Increasing incorporation of organic fertilizer would increase soil organic carbon (SOC) but it could bring high potential of nutrient losses which would result in water quality degradation. In this paper, literature review on soil organic carbon behavior according to agricultural management is presented. The results of field experiment to identify the effect of organic and commercial fertilizer applications on SOC and runoff water quality were also presented. Field experiment confirmed increased SOC and nutrient concentrations in runoff water as application rate of organic fertilizer increase. The potential use of simulation model to develop best agricultural management practice considering carbon sequestration and water quality conservation at the same time is discussed and monitoring and modeling strategies are also suggested to achieve the goal.

탄소 나노튜브와 생체 분자와의 결합을 통한 나노-바이오 응용 (Nano-Bio Applications Using Carbon Nanotube-Biomolecule Conjugates)

  • 황응수;조승범;홍상현;정혜진;차창용;최재붕;김영진;백승현
    • 한국정밀공학회지
    • /
    • 제23권3호
    • /
    • pp.179-186
    • /
    • 2006
  • Single-walled carbon nanotubes (SWNT) exhibit strong Raman signals as well as fluorescence emissions in the near infrared regions where most biomolecules are transparent. Such signals do not blink or photobleach under prolonged excitation. which is advantageous to optical nano-bio marker applications. In this paper, single walled carbon nanotubes are conjugated with specific types of single-stranded DNA in order to detect oligonucleotides of corresponding complimentary sequences. Dot blotting experiments and comparative Raman spectroscopy observations demonstrated excellent sensitivity and specificity of carbon nanotube-DNA probes. The results show the possibility of using SWNT as generic nano-bio markers for the precise detection of specific kinds of genes.

일산화탄소탈수소화효소를 이용한 이산화탄소의 전기화학적 환원에 미치는 pH와 온도의 영향 (Effect of pH and Temperature on the Electrochemical Reduction of Carbon Dioxide by Carbon Monoxide Dehydrogenase)

  • 신준원;김유성;이상희;이상필;이호준;임미란;송지은;신운섭
    • 전기화학회지
    • /
    • 제10권4호
    • /
    • pp.265-269
    • /
    • 2007
  • 일산화탄소탈수소화효소를 이용한 이산화탄소의 전기화학적 환원 반응의 최적화를 위해 pH와 온도의 영향을 살펴보았다. pH는 이산화탄소의 환원반응 용이성과 효소의 안정도 효과가 함께 반영되는 6.3에서 최적의 조건을 보였고, 온도는 이산화탄소의 용해도가 적어지더라도 효소의 활성이 가장 좋은 60도에서 최적 조건을 보였다. 일산화탄소탈수소화효소의 안정성 및 활성이 가장 중요한 조건임을 알 수 있었다.

Characterization of carbon dioxide sensitive fluorescence dye immobilized on the sol-gel

  • Sohn, Ok-Jae;Lam, Tuan-Hung;Rhee, Jong-Il
    • 한국생물공학회:학술대회논문집
    • /
    • 한국생물공학회 2005년도 생물공학의 동향(XVI)
    • /
    • pp.478-481
    • /
    • 2005
  • In this study optical sensing membrane was developed for the queantification of dissolved carbon dioxide in micro-bioreactor using an immobilized 8-hydroxypyrene-1,3,6-trisulfonic acid trisodium salt (HPTS). For the immobilization of HPTS sol-gel was synthesied by using 3-glycidoxypropyl-dimethoxymethylsiline and tetraethyl orthosilicate.

  • PDF

Non-blinking dendritic crystals from C-dot solution

  • Mewada, Ashmi;Vishwakarma, Ritesh;Patil, Bhushan;Phadke, Chinmay;Kalita, Golap;Sharon, Maheshwar;Sharon, Madhuri
    • Carbon letters
    • /
    • 제16권3호
    • /
    • pp.211-214
    • /
    • 2015
  • Bio-imaging and drug carriers for delivery have created a huge demand for crystals. Crystals are fascinating materials that have been grown for a long time but obtaining biocompatible fluorescent crystals is a challenging task. We report on the growth of fluorescent crystals using a carbon dot (C-dot) solution by a hydrothermal process. The crystallization pattern of these C-dots exhibited a unique dendritic structure having a feather-like morphology. The growth temperature and pressure were maintained at 60℃ and 200 mmHg, respectively, for crystal growth. A green fluorescence (under UV light) that was observed in the C-dot solution was retained in the crystals formed from the solution. Cytotoxicity studies on Vero cells revealed the crystals to be extremely biocompatible. These fluorescent crystals are extremely well suited for biomedical and optoelectronic applications.

탄소나노튜브의 제조 및 광학적 응용 연구 (Synthesis of Carbon Nanotube and Optical Application)

  • 주영준;소원욱;김희주;최호석;문상진
    • 한국수소및신에너지학회논문집
    • /
    • 제14권3호
    • /
    • pp.247-257
    • /
    • 2003
  • To investigate the effect of preparing condition on the physical properties of carbon nanotubes suitable for optical applications, carbon nanotubes were synthesized by thermal chemical vapor deposition using Ni particles as a catalyst on stainless steel substrate and acetylene as a reactant gas. To examine the physical and optical properties, SEM, TEM, Ram an, UV-visible, and photoluminescence spectroscopy were used. The physical properties of carbon nanotubes such as diameter, degree of growth density and morphology were closely related to such experimental conditions as Ni particle size, growing pressure, and etching condit on of Ni particles, it appeared from the light absorbance and photoluminescence spectra of carbon nanotube mixture prepared with an addition of a photopolymer, P3HT(Poly(3-hexylthIop hene)) that carbon nanotube could do a role as a kind of electron acceptor for solar cell application.

가솔린 엔진(3.8L)에서 바이오에탄올 혼합연료의 성능 및 배출특성에 관한 연구 (A Study on Engine Performance and Exhaust Emission Characteristics of Gasoline Engine using Bio-ethanol Blended Fuel)

  • 이치우
    • 한국기계가공학회지
    • /
    • 제11권4호
    • /
    • pp.131-137
    • /
    • 2012
  • This article is about using the fuel mixed with 10% and 20% bio-ethanol to gasoline for the engine as a way to reduce carbon emission before commercializing future automobiles like fuel cell cars. The fuel mixed with 10% and 20% bio-ethanol showed output equivalent to that of the previous gasoline fuel. CO and $CO_2$ emission was somewhat reduced, but the difference was not significant. And the consumption of the fuel increased slightly. However, bio-ethanol is produced from bio mass growing with the absorption of carbon dioxide, so the total amount of carbon dioxide did not increase according to the result. In NOx, as the use of ethanol increases, the effect of reduction gets greater, and the emission of oxygen showed almost no change compared with gasoline.

바이오 에탄올 혼합유에 대한 디젤기관의 연소특성 (Combustion characteristics of diesel engine with bio-ethanol blend fuel)

  • 정석호
    • 수산해양기술연구
    • /
    • 제45권2호
    • /
    • pp.114-121
    • /
    • 2009
  • There are increased in using the bio-ethanol, as the carbon neutral attracts many researchers due to a reduction in carbon dioxide spotted as the global warming gas. A gasoline engine with 100% of the bioethanol was developed and used in Brazil already, but researches of using the bio-ethanol in diesel engines are lack. In this study, combustion tests with blend fuel of the gas oil and bio ethanol by 50% maximally due to a low cetane number of bio-ethanol were accomplished as a basic study of introduction of using the bioethanol in diesel engines. The result was that smoke emission was decreased with increase in proportion of the bio-ethanol, due to the increase of a amount of pre-mixed combustion with ignition delay. Although the amount of $CO_2$ is reduced according as the bio-ethanol is used(carbon neutral), the emission of $CO_2$ with increase in the proportion of the bio-ethanol was more increased due to lower a heat value of bio-ethanol than gas oil.

일산화탄소탈수소화효소를 이용한 이산화탄소의 전기화학적 환원에 미치는 전극재료와 전위의 영향 (Effect of Electrode Materials and Applied Potential in Electrocatalytic Reduction of Carbon Dioxide by Carbon Monoxide Dehydrogenase)

  • 신준원;김유성;송지은;이상희;이상필;이호준;임미란;신운섭
    • 전기화학회지
    • /
    • 제11권3호
    • /
    • pp.165-169
    • /
    • 2008
  • CODH(Carbon Monoxide Dehydrogenase)에 의한 이산화탄소 환원에 있어서 작업전극을 유리탄소전극을 사용한 경우와 금전극을 사용한 경우를 비교하여 그 영향을 관찰하였다. 금전극을 사용한 경우에는 수소발생과 섞이기 때문에 전기분해의 전위를 잘 선택해야 효율적인 이산화탄소의 환원 반응을 관찰할 수 있는데 반하여, 유리탄소전극은 금전극보다 수소 환원에 대한 과전압이 크기 때문에 -650 mV vs. NHE 까지도 중성수용액에서 수소발생 없이, 효율적인 이산화탄소의 환원을 관찰할 수 있었다. CODH를 이용한 이산화탄소의 환원에는 가해주는 전기분해 전위가 큰 영향을 미침을 알 수 있었는데, $-570{\sim}600\;mV$ vs. NHE 근처가 가장 효율적임을 알 수 있었고 이보다 더 음의 전위를 걸어주었을 때는 효소활성의 감소 및 수소발생이 복합적으로 영향을 미쳐 일산화탄소 생성의 전류효율이 급격히 감소함을 알 수 있었다.