• 접착 및 계면
• /
• 제4권4호
• /
• pp.7-14
• /
• 2003

택(tack)은 아주 가벼운 힘으로 단시간에 피착체와 점착하는 능력이다. 택의 측정기기 중 프로브택(probe tack)은 실험적인 영향인자를 설정할 수 있기에 택의 이론적 고찰이 유리하다. SIS계 핫멜트형 점착제(SIS-based hotmelt PSA)와 수분산성 아크릴 점착제(Water-borne acrylic PSA)를 사용하여 probe가 점착제 표면에 다가가는 속도가 택에 미치는 영향을 살펴보았다.

• 한국고분자학회지:고분자과학과기술
• /
• 제23권1호
• /
• pp.47-60
• /
• 2012

• 접착 및 계면
• /
• 제5권3호
• /
• pp.23-28
• /
• 2004

• 접착 및 계면
• /
• 제8권3호
• /
• pp.34-45
• /
• 2007

• 한국재료학회지
• /
• 제14권4호
• /
• pp.287-292
• /
• 2004

A bio-composites were prepared by mechanical mixing with bioactive sol-gel derived $CaO-SiO_2$ and organic PEEK for bone repairing hybrid materials. The composites were characterized by in-vitro test. A bonelike apatite was formed on the surface of all bio-composites in SBF test. The cell morphology and adhesion on the surface of the composites having below 30% PEEK were clearly observed in L929 cell experiment.

• 접착 및 계면
• /
• 제9권3호
• /
• pp.27-33
• /
• 2008

무기계 킬레이트의 일종인 aluminum acetylacetonate (AlACA)를 점착제의 -COOH 당량비에 따라 0, 0.25, 0.5, 0.75, 1의 비율로 변화 시키고, 점착제는 acrylic acid의 함량을 3 wt%, 7 wt%, 10 wt%으로 변화를 시켜 그에 따른 경화거동을 살펴 보았다. 킬레이트의 함량이 증가하면서 가교 구조가 형성되고, 이에 따라 probe tack의 fibrillation이 줄어들고, peel strength도 줄어드는 경향을 보였다. SAFT의 경우 점착제의 acrylic acid 함량이 증가함에 따라 확연히 증가하였다. 본 연구 결과, aluminum acetylacetonate는 점착물성을 크게 변화시키지 않는 범위에서 점착제를 가교 시킬 수 있음을 확인하였다.

• Advanced Composite Materials
• /
• 제16권4호
• /
• pp.299-314
• /
• 2007

In the present study, natural fibers (jute, kenaf and henequen) reinforced thermoplastic (poly(lactic acid) and polypropylene) and thermosetting (unsaturated polyester) matrix composites were well fabricated by a compression molding technique using all chopped natural fibers of about 10 mm long, respectively. Prior to green composite fabrication, natural fiber bundles were surface-treated with tap water by static soaking and dynamic ultrasonication methods, respectively. The interfacial shear strength, flexural properties, and dynamic mechanical properties of each green composite system were investigated by means of single fiber microbonding test, 3-point flexural test, and dynamic mechanical analysis, respectively. The result indicated that the properties of the polymeric resins were significantly improved by incorporating the natural fibers into the resin matrix and also the properties of untreated green composites were further improved by the water treatment done to the natural fibers used. Also, the property improvement of natural fiber-reinforced green composites strongly depended on the treatment method. The interfacial and mechanical results agreed with each other.

• Structural Engineering and Mechanics
• /
• 제81권6호
• /
• pp.729-736
• /
• 2022

Earth is facing a serious problem of pollution and scarcity of energy sources. The synthetic fibers used in automobile and Aerospace manufacturing sectors are non-renewable and harmful to environment. International Agency such as FAA and SAE is forcing for green fuel, green materials and structures. Further exploration is much needed to understand its potential in structural applications. In the current study, hemp and Jute fibre based composites were developed and tested for assessing their suitability for possible applications in automobile and aerospace sectors. Composites were undergone tensile test, water absorption test, and fatigue analysis to understand its behavior under various loading conditions. The finite element analysis has been carried out to understand the fatigue behaviour of composites. The results revealed that the usage of hemp and jute fibre reinforced composites can improve mechanical properties and have shown a viable alternative to replace synthetic fibres such as glass fibres for specific applications. Hemp reinforced bio-composites have shown better performance as compared to Jute reinforced bio-composites while water resistance characteristics for hemp is poorer to jute fibres.

• Composites Research
• /
• 제27권5호
• /
• pp.196-200
• /
• 2014

A novel, simple and totally recyclable method has been developed for the synthesis of nontoxic, biocompatible and biodegradable bio-composite films from soy protein and silk protein. Bio films are defined as flexible films prepared from biological materials such as protein. These materials have potential application in medical and food as a packaging material. Their use depends on various parameters such as mechanical (strength and modulus), thermal, among others. In this study, prepare and characterization of bio films made from Soy Protein Isolate (SPI) (matrix) and Silk Fiber (SF) (reinforcement) through solution casting method by the addition of plasticizer and crosslinking agent. The obtained SPI and SPI/SF composites were subsequently subjected to evaluate their mechanical and thermal properties by using Universal Testing Machine and Thermal Gravimetric Analyzer respectively. The tensile testing showed significant improvements in strength with increasing amount of SF content and the % elongation at break of the composites of the SPI/SF was lower than that of the matrix. Though the interfacial bonding was moderate, the improvement in tensile strength and modulus was attributed to the higher tensile properties of the silk fiber.

• 한국의류학회지
• /
• 제34권11호
• /
• pp.1889-1899
• /
• 2010

This study examines the preparation and characterization of Kenaf/Starch bio-composites used as filler and a matrix. Kenaf was cultivated in Chung-ju in Korea, and the Kenaf/Starch bio-composites were prepared under various conditions of kenaf fiber length (1-5 centimeters); the content of Kenaf fiber was 10%, 20%, 30%, and 40%, and the number of composite layers (one-four). Depending on the formation conditions of Kenaf/Starch composites, the physical properties such as tensile strength, elongation, and the young modulus of the Kenaf/Starch composites were measured. In addition, we measured the SEM cross-section images in order to investigate the interfacial adhesion properties of fractured surfaces. As a result, the tensile strength and elongation of the Kenaf/Starch composites were highest in the molding conditions of a hot press at $120^{\circ}C$, 3000PSI of pressure, and for 30 minute periods. The result of measuring the physical properties of the composites manufactured by varying the content of Kenaf fiber when the content of Kenaf fiber was 30% as well the physical properties of the Kenaf/Starch composite was found desirable. It was found that the physical properties improved with more overlapped layers in the composites manufactured by varying the number of overlapped layers. Through the measuring of the SEM cross-section images, we found that the interfacial adhesion state between the filler and matrix of Kenaf/Starch composite greatly affects the physical properties.