• Journal of The Korean Association of Information Education
• /
• 제19권4호
• /
• pp.525-532
• /
• 2015

Unplugged has been widely used as an instrument for teaching the basic principles of Computer Science. This study presents the teaching contents developed for the children without any knowledge of binary numbers. which successfully guided them to understand the natural number binary system. The level of the pre-lesson for this learning requires counting numbers, matching numbers with cards, and arranging numbers. The activity-based learning is provided for describing natural numbers with the binary system and finding out them in everyday life. To check the adequacy of these materials on their organization and assessment they were tested at the classroom, which showed effective about the knowledge, the attitude and the generalization.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• 제42권5호
• /
• pp.47-54
• /
• 2005

This paper proposes and analyzes a Tag Anti-collision algorithm in RFID system. We mathematically compare the performance of the proposed algorithm with existing binary algorithms(binary search algorithm, slotted binary tree algorithm using time slot, and bit-by-bit binary tree algorithm proposed by Auto-ID center). We also validated analytic results using OPNET simulation. Based on analytic result, comparing the proposed Improved bit-by-bit binary tree algerian with bit-by-bit binary tree algorithm which is the best of existing algorithms, the performance of Improved bit-by-bit binary tree algorithm is about $304\%$ higher when the number of tags is 20, and $839\%$ higher when the number of tags is 200.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• 제41권8호
• /
• pp.55-62
• /
• 2004

This paper proposes and analyzes two anti-collision algorithms in Ubiquitous ID system. We mathematically compares the performance of the proposed algorithms with that of binary search algorithm slotted binary tree algorithm using time slot, and bit-by-bit binary tree algorithm proposed by Auto-ID center. We also validated analytic results using OPNET simulation. Based on analytic result comparing the proposed Modified bit-by-bit binary tree algorithm with bit-by-bit binary tree algorithm which is the best of existing algorithms, the performance of Modified bit-by-bit binary tree algorithm is about 5% higher when the number of tags is 20, and 100% higher when the number of tags is 200. Furthermore, the performance of proposed Enhanced bit-by-bit binary tree algorithm is about 335％ and 145% higher than Modified bit-by-bit binary tree algorithm for 20 and 200 tags respectively.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제12권5호
• /
• pp.492-504
• /
• 1987

The Binary Decision method can evaluate any switching function in the number of steps not exceeding the number of input variables. A Binary Decision Programmable Controller module is designed using this method so as to improve scan speed. A compiler system is also developed to relieve the memory problem which the Binary Decision method entails. A communication channel between MDS and BD-PC modules is also constructed to load the compiled BD-PC object program into the memory of BD machine.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• 제40권6호
• /
• pp.1-8
• /
• 2003

A novel CORDIC circuit is presented based on a redundant number system eliminating global carry Propagation. The number format employs a new recoding scheme similar to the Booth receding resolving carry problems in addition. A pipelined architecture is introduced having a constant scale factor in its computation of trigonometric functions. The operational time of the circuit is constant independent of the number of operand digits.

• Proceedings of the IEEK Conference
• /
• 대한전자공학회 2003년도 통신소사이어티 추계학술대회논문집
• /
• pp.297-301
• /
• 2003

The binary clipping PW/CDMA system is considered. This system can be constructed with effective cost. leading to reduce the influence of the non-linear amplifier because of converting multi-level signals into constant envelope signals. In addition, the clipping method which is to clip out signal amplitude at some level when multi-level signals are converted into constant envelope signals is used. The multi-level signals are clipped at 1 and -1 to limit the extension of bandwidth and to maintain the bandwidth after clipping. In this paper, the performance of the binary clipping PW/CDMA system with the non-linear amplifier analyzed by simulation over AWGN and flat fading channels respectively. The binary clipping PW/CDMA system with the non-linear amplifier is 2.2dB and 0.9dB better than conventional DS/CDMA system over the flat fading channels when the number of users are 9 and 17 respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제5권3호
• /
• pp.517-524
• /
• 2001

This paper describes a design of radix-2 SRT divider unit, which supports IEEE-754 floating-point standard, using redundant binary number system (RBNS). With the RBNS, the partial quotient decision logic can operate about 20-% faster, as well as can be implemented with a simple hardware when compared to the conventional methods based on two's complement arithmetic. By using a new redundant binary adder proposed in this paper, the mantissa divider is efficiently implemented, thus resulting in about 20% smaller area than other works. The divider unit supports double precision format, five exceptions and four rounding modes. It was verified with Verilog HDL and Verilog-XL.

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• 제55권11호
• /
• pp.491-494
• /
• 2006

In the adder design, reduction of the delay of the carry propagation or ripple is the most important consideration. Previously, it was introduced that, if a redundant number system is adopted, the carry propagation is completely eliminated, with which addition can be done in a constant time, without regarding to the count of the digits of numbers involved in addition. In this paper, a RBCD(Redundant Binary Coded Decimal) is adopted to code 0 to 11, and an efficient and economic carry-free BCD adder is designed.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.429-432
• /
• 2008

In this paper, performance of a double binary turbo coded ultra wide band (UWB) system is analyzed and simulated in an indoor wireless channel. Binary pulse position modulation-time hopping (BPPM-TH) signals are considered. The indoor wireless channel is modeled as a modified Saleh and Valenzuela (SV) channel. The performance is evaluated in terms of bit error probability (BER). From the simulation results, it is seen that double binary turbo coding offers considerable coding gain with reasonable encoding complexity. It is also demonstrated that the performance of the UWB system can be substantially improved by increasing the number of iterations.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제15권5호
• /
• pp.486-492
• /
• 2004

In this paper, we newly propose the binary CA-CDMA(constant amplitude CDMA) system using pre-coding method to solve the high PAPR problem caused by multi-user signal transmission in the CDMA system. 4-user CA-CDMA, the basis of proposed binary CA-CDMA system, makes binary output signal for 4 input users. It produces the output of binary(${\pm}$2) amplitude by using a parity signal resulting from the XOR operation of 4 users data. Another sub-channel or more bandwidth is not necessary because it is transmitted together with user data and can be easily recovered in the receiver. The extension of the number of users can be possible by the simple repetition of the basic binary 4-user CA-CDMA. For example, binary 16-user CA-CDMA is made easily by allocating the four 4-user CA-CDMA systems in parallel and leading the four outputs to the fifth 4-user CA-CDMA system as input, because the output signal of each 4-user CA-CDMA is also binary. By the same extension procedure, binary 64 and 256-user CA-CDMA systems can be made with the constant amplitude. As a result, the code rate of this proposed CA-CDMA system is just 1 and binary CA-CDMA does not change the transmission rate with the constant output signal(PAPR = 0 ㏈). Therefore, the power efficiency of the HPA can be maximized without the nonlinear distortion. From the simulation results, it is verified that the conventional CDMA system has multi-level output signal, but the proposed binary CA-CDMA system always produces binary output. And it is also found that the BER of conventional CDMA system is increased by nonlinear HPA, but the BER of proposed binary CA-CDMA system is not changed.