• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.6
• /
• pp.1148-1152
• /
• 2012

In this paper, we propose an intelligent surveillance system using fuzzy contrast and HOG method. This surveillance system is mainly for the intruder detection. In order to enhance the brightness difference, we apply fuzzy contrast and also apply subtraction method to before/after the surveillance. Then the system identifies the intrusion when the difference of histogram between before/after surveillance is sufficiently large. If the incident happens, the camera stops automatically and the analysis of the screen is performed with fuzzy binarization and Blob method. The intruder is detected and tracked in real time by HOG method and linear SVM. The proposed system is implemented and tested in real world environment and showed acceptable performance in both detection rate and tracking success rate.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.11
• /
• pp.2429-2434
• /
• 2010

In this paper, we propose a method to extract and analyze palm line with fuzzy method. In order to extract the palm part, we transform the original RGB color space to YCbCr color space and extract sin colors ranging Y:65-255, Cb:25-255, Cr:130-255 and use it as a threshold. Possible noise is removed by 8-directional contour tracking algorithm and morphological characteristic of the palm. Then the edge is extracted from that noise-free image by stretching method and sobel mask Then the fuzzy binarization algorithm is applied to remove any minute noise so that we have only the palm lines and the boundary of the hand. Since the palm line reading is done with major lines, we use the morphological characteristics of the analyzable palm lines and fuzzy inference rules. Experiment verifies that the proposed method is better in visibility and thus more analyzable in palm reading than the old method.

• Journal of the Optical Society of Korea
• /
• v.14 no.4
• /
• pp.368-375
• /
• 2010

Unlike document images, license plate images are mostly captured under uneven lighting conditions. In particular, a shadowed region has sharp intensity variation and sometimes that region has very high intensity by reflected light. This paper presents a new technique for thresholding license plate images. This approach consists of three parts. In the first part, it performs a rough thresholding and classifies the type of license plate to adjust some parameters optimally. Next, it identifies a shadow type and binarizes license plate images by adjusting the window size and location according to the shadow type. And finally, post-processing based on the cluster analysis is performed. Experimental results show that the proposed method outperformed five well-known methods.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2019.05a
• /
• pp.23-24
• /
• 2019

In this study, analysis of steel fiber orientation and distribution inside fiber reinforced concrete was performed using micro-CT scanning technology. Samples were extracted from the column according to its height and distance from the mold. Samples were scanned in order to attain the image of steel fibers then region of interest were obtained by binarization process. By calculating the principle moment of inertia of each fiber, direction vector, scale, center postion, volume, and surface area were gained in order to analyze the orientation and distribution. Most of the fibers inside the column tended to be perpendicular to the main axis of the column. Moreover, most of the fibers appeared at the bottom of the column and at the position where it is farthest from the mold.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 2003.11a
• /
• pp.145-156
• /
• 2003

This paper for real time object tracking in this treatise detect histogram analysis that is accumulation value of binary conversion density and edge information and body that move by real time use of difference Image techniques and proposed method to object tracking. Firstly, we extract edge that can reduce quantity of data keeping information about form of input image in object detection. Object is extracted by performing difference image and binarization in edge image. Area of detected object is determined by threshold value that divide sum of horizontal accumulation value about binary conversion density by value that add horizontalityㆍverticality maximum accumulation value. Object is tracked by comparing similarity with object that is detected in previous frame and present frame. As experiment result, proposed algorithm could improve the object detection speed, and could track object by real time and could track local movement.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.36 no.6
• /
• pp.594-599
• /
• 2008

Image data produced from ADD water-tunnel test are currently analyzed manually. The accuracy and elapsed time of this process can be determined by observers. In this paper, the algorithm based on MATLAB for improved image data processing and analysis is proposed. This algorithm consists of camera calibration, gray-level transformation, noise filtering and binarization in image preprocessing, vortex trajectory measurement in image analysis. Experimental results show that the proposed algorithm has better accuracy and execution speed than those of the existing methods.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2006.11a
• /
• pp.89-96
• /
• 2006

To estimate the manufacturing district and generation of ancient paper as a cultural property, fiber orientation is one of the criteria. Image analysis using fast Fourier transform with suitable modifications was demonstrated to be an effective means to determine angle and intensity of fiber orientation as a nondestructive method. Binarization process of microscopic images of paper surface and precise calculation for average Fourier coefficients as an angular distribution by linear interpolation were newly introduced in the procedures to improve the accuracy. This analysis method was applied to digital optical micrographs of paper surfaces. Korea and Japanese traditional hand making papers were well distinguished. Korea and Japanese papers made in the traditional ways showed its own characteristic orientation behavior in accordance with the motion of a bamboo wire.

• Journal of the Architectural Institute of Korea Structure & Construction
• /
• v.34 no.10
• /
• pp.11-18
• /
• 2018

In this study, the cross-sectional image has been acquired to evaluate the aggregate distribution affecting quality of lightweight aggregate concrete, and through the binarization method, the study is to calculate the aggregate area of upper and lower sections to develop the method to assess the aggregate distribution of concrete. The acquisition of cross-section image of concrete for the above was available from the cross-sectional photography of cleavage tension of a normal test specimen, and an easily accessible and convenient image analysis software was used for image analysis. As a result, through such image analyses, the proportion of aggregate distribution of upper and lower sections of the test specien could be calculated, and the proportion of aggregate area U/L value of the upper and lower regions of concrete cross-section was calculated, revealing that it could be used as the comprehensive index of aggregate distribution. Moreover, through such method, relatively easy image acquisition methods and analytic methods have been proposed, and this indicated that the development of modeling to assess aggregate distribution quantitatively is available. Based on these methods, it is expected that the extraction of fundamental data to reconsider the connectivity with processes in concrete will be available through quality assessment of quantitative concrete.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.655-658
• /
• 2003

The crack of concrete structure plays an important role in the durability and safety of structure. Therefore, the features such as width, length, and direction of that must be measured periodically. The conventional method of measurement of cracks is manually sketched, however. it takes a fairly long time and lacks quantitative objectivity. This study proposes the algorithm to extract and analyze cracks automatically. The proposed algorithm is composed of two sub-algorithms. The extraction algorithm includes elimination of effect due to light, binarization. and noise reduction. The analysis algorithm includes thinning process, labeling, and calculation of crack width, length, and direction. The test to demonstrate the algorithm is fulfilled using the images of cracks on real concrete surface.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.179-182
• /
• 2010

본 논문에서는 영상으로부터 손금을 추출하기 위해서 획득된 영상을 YCbCr 컬러 공간으로 변환한다. YCbCr 컬러 공간에서 Y:65~255, Cb:25~255, Cr:130~255에 해당되는 피부색 정보를 추출하고 이 피부색 정보를 임계치로 설정하여 손 영역을 추출한다. 추출된 손 영역에서 내부 픽셀의 3:1 이상, 전체 영상의 2:1 이상인 손의 형태학적 정보와 8 방향 윤곽선 추적 기법을 이용하여 잡음을 제거한다. 잡음이 제거된 영상에서 손금을 추출하기 위해서 스트레칭 기법과 소벨 마스크를 이용하여 에지를 추출한다. 추출된 에지 영상에서도 미세한 잡음이 존재하므로 퍼지 이진화 기법을 이용하여 효과적으로 이진화 한다. 이진화된 영상에서 손금의 형태학적 정보를 이용하여 손의 윤곽선을 제외한 손금 영역을 추출한다. 추출된 손금 영역은 동치 테이블을 이용하는 연결 영역 검색 기법과 퍼지 추론 기법을 적용하여 개별 손금의 중요선을 추출하고 분석한다. 다양한 손금 영상을 대상으로 실험한 결과, 제안된 방법이 기존의 손금 추출 방법보다 손금을 분석하는데 효율적인 것을 확인하였다.