• International Journal of Highway Engineering
• /
• v.12 no.3
• /
• pp.103-111
• /
• 2010

Recently, usage bicycle has been encouraged to reduce energy consumption and $CO_2$. For this purpose, lots of bike road construction are planned. Typical type of pavement used in bikeroad such as asphalt concrete pavement, portland cement concrete pavement, colored pavement, soil pavement. However, these pavement types may need high construction cost comparing the required capacity of bike road. In this study, roller compacted concrete pavement which are economical and durable, are investigated to use as bike road pavement. The optimum compaction level and mix design of roller compacted concrete pavement are suggested by exploring strength test with various mixture ratio and compaction level, Also durability was examined based on freeze-thaw and scaling test. In addition, the cost and amount of carbon emission during in the construction of roller compacted concrete were evaluated and compare with the cost and carbon emission of typical portland cement concrete.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.42 no.6
• /
• pp.57-66
• /
• 2005

In this paper, a new rehabilitation training system was developed to improve equilibrium sense by combining virtual reality technology with a fixed exercise bicycle. The subjects consisted of two groups. A group of young people, was compared against a group of elderly. We measured three different running modes of virtual bicycle system with two successive sets. The parameters measured were running time, velocity, the weight movement, the degree of the deviation from the road, and the variables about the center of pressure. The repeated training, our results showed that the running capability of the elderly improve compared. In addition, it was found out that the ability of postural control and the equilibrium sense was improved with the presentation of the visual feedback information of the distribution of weight. From the results of this experiment, we showed that our newly developed system might be useful in the diagnosis of equilibrium sense or in the improvement of the sense of sight and, somatic, and vestibular sense of the elderly in the field of rehabilitation training.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.27 no.5
• /
• pp.1-11
• /
• 2000

The aim of this study is to suggest guidelines of bicycle lanes in terms of landscape architecture with special reference to Kyongju. The research is mainly based on landscape satisfaction factors analysis regarding 16 variables and 10 slide photos of bicycles lanes. The 43 students of Landscape Department in Kyungpook National University were selected for the research. The major research findings are as follows; 1. Satisfaction degree of 16 variables are assessed in terms of semantic differential scale. The assess group is generally satisfied with variables concerning bicycle lane environment such as $\ulcorner$inclination of the lane (5.2)$\lrcorner$and $\ulcorner$road pavement conditions (5.1)$\lrcorner$. But the group expresses rather low satisfaction degree on the variables related lanes' surrounding landscape such as $\ulcorner$visual variety (3.9)$\lrcorner$, spacious resting place (3.7)$\lrcorner$ and $\ulcorner$variety of facilities (3.1)$\lrcorner$. 2. The level of satisfaction degree regarding 16 variables and 10 photos shows that the male gives relatively higher satisfaction degree than the female group. But there is no statistical significance between the group regarding satisfaction degree of each variable and photo except 4 variables and 2 photos. 3. The assess group gives the highest satisfaction degree on the$\ulcorner$no. 10 slide (6.5)$\lrcorner$ and the lowest on the $\ulcorner$no. 7 slide (2.7)$\lrcorner$. The two photo shows variables of more than 4 points difference of satisfaction degree, such as $\ulcorner$good looking planting threes (4.8)$\lrcorner$, $\ulcorner$enough shadows (4.8)$\lrcorner$ and $\ulcorner$comfortable atmosphere(4.1)$\lrcorner$. 4. $\ulcorner$Aesthetic and amenity factor$\lrcorner$, $\ulcorner$use condition factors$\lrcorner$, $\ulcorner$ike lane environment factors$\lrcorner$, and $\ulcorner$inclination and open view factors$\lrcorner$are the main four factors influencing landscape satisfaction of bicycle lane. Regression model using factor scores for landscape satisfaction degree of bike lane is S(Satisfaction degree)=4.526+1.099(aesthetic and amenity factor)+0.720(use condition factors)+0.486(bike lane environment factors)+0.048(inclination and open view factors($R^2$=0.811).

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.1
• /
• pp.141-148
• /
• 2021

In some intersections or busy traffic roads, there are more pedestrians in a specific period of time, and there are many traffic accidents caused by road congestion. Especially at the intersection where there are schools nearby, it is particularly important to protect the traffic safety of students in busy hours. In the past, when designing traffic lights, the safety of pedestrians was seldom taken into account, and the identification of motor vehicles and traffic optimization were mostly studied. How to keep the road smooth as far as possible under the premise of ensuring the safety of pedestrians, especially students, will be the key research direction of this paper. This paper will focus on person, motorcycle, bicycle, car and bus recognition research. Through investigation and comparison, this paper proposes to use YOLO v4 network to identify the location and quantity of objects. YOLO v4 has the characteristics of strong ability of small target recognition, high precision and fast processing speed, and sets the data acquisition object to train and test the image set. Using the statistics of the accuracy rate, error rate and omission rate of the target in the video, the network trained in this paper can accurately and effectively identify persons, motorcycles, bicycles, cars and buses in the moving images.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.13 no.5
• /
• pp.35-49
• /
• 2014

This paper proposes the on-road object detection and classification algorithm by using a detection system consisting of only laser scanners. Each sensor data acquired by the laser scanner is fused with a grid map and the measurement error and spot spaces are corrected using a labeling method and dilation operation. Fuzzy method which uses the object information (length, width) as input parameters can classify the objects such as a pedestrian, bicycle and vehicle. In this way, the accuracy of the detection system is increased. Through experiments for some scenarios in the real road environment, the performance of the proposed detection and classification system for the actual objects is demonstrated through the comparison with the actual information acquired by GPS-RTK.

• Journal of the Korean housing association
• /
• v.15 no.5
• /
• pp.97-105
• /
• 2004

The main purpose of this study is to define the characteristics of emvironmental-friendly design which is found on in the planning of apartment housing complex. For this purpose, the subject of analysis were focused on the plans which had been authenticated an apartment housing complex development of Green Buildings. In conclusion, the characteristics of environmental-friendly design in the of apartment housing complex which are analysed through this study can be summarized as follows: It is shown that most plans hardly used the designs items such as 'preserving geographical feature' , 'use of substitutive sources' while the application ratio of 'making streamlets' , 'artificials afforestations' , 'making pedestrain road and bicycle road' is highest. this analysis means many planners and designers depends on only a few design elements when they plan apartment housing complex. it is because they don't have a correct understanding of environmental-friendly development.

• 제어로봇시스템학회:학술대회논문집
• /
• 2004.08a
• /
• pp.1158-1161
• /
• 2004

This paper describes the construction of a half sphere screen driving tilting simulator that can perform six degree-of-freedom (DOF) motions simulator to a tilting train. The mathematical equations of Tilting Train dynamics are first derived from the 6-DOF bicycle model and incorporated with the bogie, carbody, and suspension subsystems. The equations of motion are then programmed by visual C++ code. To achieve the simulator functions, a motion platform that is constructed by six electric-driven actuators is designed, and its kinetics/inverse kinetics analysis is also conducted. Driver operation signals such as carbady angle, accelerator, and tilting positions are measured to trigger the Tilting dynamics calculation and further actuate the cylinders by the motion platform control program. In addition, a digital PID controller is added to achieve the stable and accurate displacements of the motion platform. The experiments prove that the designed simulator is adequate in performing some special rail road driving situations discussed in this paper.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.05a
• /
• pp.333-338
• /
• 2003

Although porous concrete is resently used as a pavement at a parking lot, a public squre and a bicycle road, we use without enough examining. most the maintenance of quality for porous concrete is only dealt with strength and color tone. also, there is not yet enough fundamental data about dynamical properties for strength, rate of void and water permeability. even when it is applied to at the scene, it is been a matter. Accodingly in this study analyzed influences through the dynamical properties, combination, and time to vibration. After the analyzation, they investigated peculiar dynamics which are strength of porous concrete, rate of void, and water permeability follow the rate of increase on an admixture making pozzolan reaction. This is purpose to improve capacity of the sidewalk permeable concrete and development of the economical technique for pavement.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2015.05a
• /
• pp.96-97
• /
• 2015

In this search, by evaluating the field applicability of soil mixed pavement of Red mud is mixed into the soil mixed pavement field applicability, and tries to present the basic data about the site application of recycling of red mud and low carbon construction material to. As a result, the conventional soil concrete organization standards (SPS-KSCICO-001: 2003) meets the criteria for a bicycle road, making use of red mud, natural color as well as the natural loess is expressed.

• Proceedings of the KSME Conference
• /
• 2001.06b
• /
• pp.565-570
• /
• 2001

Vehicle dynamics control (VDC) system requires more information on driving conditions compared with ABS and/or TCS. In order to develop the VDC system, tire slip angles, vehicle side-slip angle, and vehicle lateral velocity as well as road friction coefficient are needed. Since there are not any cheap and reliable sensors, recent researches on parameter estimation have given rise to a number of parameter estimation techniques. This paper presents new vehicle model to estimate vehicle's yaw rate. This model is improved from the conventional 2 degrees of freedom vehicle model, so-called bicycle model, taking nonlinear effects into account. These nonlinear effects are: (i) tyre nonlinearity; (ii) lateral load transfer during cornering; (iii) variable gear ratio with respect to vehicle velocity. Estimation results are validated with the experimental results.