• 한국광학회지
• /
• 제2권3호
• /
• pp.139-148
• /
• 1991

광섬유를 사용하여 미소 교류자기장 (200Hz-2kHz) 감지를 위한 광섬유 간섭계 자기센서시스템을 구성하였다. 자왜효과(magnetostriction effect)가 큰 비정질 metallic glass(2605SC)를 광섬유에 부착하여 자기장 감지부를 제작하고 방향성 결합기 metallic glass(2605SC)를 광섬유에 부착하여 자기장 감지부를 제작하고 방향성 결합기(directional coupler)를 사용한 광섬유 일체식(all-fiber type)으로 Mach-Zehnder 간섭계를 구성하여 외부 자기장의 변화를 간섭계의 위상변화로 변환시켜 그 크기를 측정하였다. 온도변화, 진동 등 주위환경에서 오는 불규칙한 신호에 의한 간섭계의 신호소멸(signal fading) 문제는 능동 위상추적방법(active phase tracking method)으로 간섭계의 기준 광통로(reference arm)에 위치한 위상 변조기에 보상신호를 되먹임으로써, 직각조건(quadrature condition)을 이루어 안정시켰다. 측정 결과 metallic glass의 주파수 반응특성은 900Hz-2kHz 대역에서 거의 비슷한 경향을 보였으며 최대 감도를 나타내는 직류 바이어스 자기장은 3.5 Oe 였다. 미소 교류자기장에 대한 간섭계의 출력은 $\pm$0.5 Oe 범위 안에서 좋은 선형성을 보였다. 1 kHz 교류자기장에 대한 scale factor S는 8.0 rad/Oe 이었으며 최소감지자기장은 $3X10^{-6} Oe/\sqrt{Hz}$(1Hz detection bandwidth)이었다.

• Bulletin of the Korean Chemical Society
• /
• 제31권5호
• /
• pp.1192-1198
• /
• 2010

Pharmaceuticals and personal care products (PPCPs) are emerging contaminants in the aquatic environment. Many pharmaceuticals are not completely removed during wastewater treatment, leading to their presence in wastewater treatment effluents, rivers, lakes, and ground water. Here, we developed analytical methods for monitoring ten pharmaceuticals from surface water by LC/ESI-MS/MS. For sample clean-up and extraction, MCX (mixed cation exchange) and HLB (hydrophilic-lipophilic balance) solid-phase extraction (SPE) cartridges were used. The limits of detection (LOD) in distilled water and the blank surface water were in the range of 0.006 - 0.65 and 1.66 - 45.05 pg/mL, respectively. The limits of quantitation (LOQ) for the distilled water and the blank surface water were in the range of 0.02 - 2.17 and 5.52 - 150.15 pg/mL, respectively. The absolute recoveries for fortified water samples were between 62.1% and 125.4%. Intra-day precision and accuracy for the blank surface water were 2.9% - 24.1% (R.S.D.) and -16.3% - 16.3% (bias), respectively. In surface wastewater near rivers, chlortetracycline and acetylsalicylic acid were detected frequently in the range of 0.017 - 5.404 and 0.029 - 0.269 ng/mL, respectively. Surface water near rivers had higher levels than surface water of domestic treatment plants.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.772-777
• /
• 2003

A vision-based tool position estimation system for the inspection and maintenance manipulator working inside the steam generator bowl of nuclear power plants can help human operators ensure that the inspection probe or plug are inserted to the targeted tube. Some previous research proposed a simplified tube position verification system that counts the tubes passed through during the motion and displays only the position of the tool. In this paper, by using a general camera calibration approach, tool orientation is also estimated. In order to reduce the computation time and avoid the parameter bias problem in an ellipse fitting, a small number of edge points are collected around the large section of the ellipse boundary. Experiment results show that the camera calibration parameters, detected ellipses, and estimated tool position are appropriate.

• 정보처리학회논문지B
• /
• 제11B권6호
• /
• pp.735-742
• /
• 2004

본 논문은 일반적인 그래픽스 하드웨어를 이용하여 더욱 빠른 신경망을 구현하고, 구현된 시스템을 영상 처리 분야에 적용함으로써 효용성을 검증한다. GPU의 병렬성을 효율적으로 사용하기 위하여, 다수의 입력벡터와 연결가중치벡터를 모아서 많은 내적연산을 하나의 행렬곱 연산으로 대체하였고, 시그모이드와 바이어스 항 덧셈 연산도 GPV 상에서 픽셀세이더로 구현하였다. ATI RADEON 9800 XT 보드를 이용하여 구현된 신경망 시스템은 CPU를 사용한 기존의 시스템과 비교하여 정확도의 차이 없이 30배 정도의 속도 향상을 얻을 수 있었다.

• 한국항공우주학회지
• /
• 제34권5호
• /
• pp.93-100
• /
• 2006

본 논문에서는 레이더와 원격측정시스템으로부터 수신되는 다중센서자료를 모사하는 시뮬레이터 설계와 이들 자료를 융합하기 위한 알고리듬 개발에 대하여 소개한다. 설계된 데이터 시뮬레이터는 실제 센서 시스템으로부터 얻게 되는 시간의 비동기, 통신지연, 다중 갱신주기들을 갖는 모의센서 자료를 생성하며 실제적인 센서 모델을 이용하여 측정 잡음을 생성한다. 융합알고리듬은 센서 바이어스 상태를 고려한 PVA모델을 기초로 21차 분산형 칼만 필터로 설계되었고, 센서의 이상이나 정상적이 아닌 측정치를 검출하기 위한 로직도 포함되었다. 설계된 알고리듬을 시뮬레이터에서 생성한 모의 자료 및 실제 자료를 적용하여 검증하였다.

• Structural Engineering and Mechanics
• /
• 제43권3호
• /
• pp.371-394
• /
• 2012

Accurate finite element (FE) models are needed in many applications of Civil Engineering such as health monitoring, damage detection, structural control, structural evaluation and assessment. Model accuracy depends on both the model structure (the form of the equations) and the model parameters (the coefficients of the equations), and can be generally improved through that process of experimental reconciliation known as model updating. However, modelling errors, including (i) errors in the model structure and (ii) errors in parameters excluded from adjustment, may bias the solution, leading to an updated model which replicates measurements but lacks physical meaning. In this paper, an application of ambient-vibration-based model updating to a large-scale benchmark prototype of a building structure is reported in which both types of error are met. The error in the model structure, originating from unmodelled secondary structural elements unexpectedly working as resonant appendages, is faced through a reduction of the experimental modal model. The error in the model parameters, due to the inevitable constraints imposed on parameters to avoid ill-conditioning and under-determinacy, is faced through a multi-model parameterization approach consisting in the generation and solution of a multitude of models, each characterized by a different set of updating parameters. Results show that modelling errors may significantly impair updating even in the case of seemingly simple systems and that multi-model reasoning, supported by physical insight, may effectively improve the accuracy and robustness of calibration.

• Journal of Pharmaceutical Investigation
• /
• 제36권2호
• /
• pp.123-129
• /
• 2006

A method determining the plasma concentration of clotiazepam was developed by using gas chromatography/mass spectrometry with an ion-trap detector and was validated for applying pharmacokinetics to human volunteers orally taken 5 mg dose of clotiazepam. The detection limit was 1 ng/ml and the limit of quantitation was 5 ng/mt. Intraday reproducibility and accuracy bias % were less than 8.2 and 10.2% with inter-day variations for those being within 7.0 and 13.8%, respectively. The recovery of clotiazepam was higher than 87%. The principal pharmacokinetic parameters were determined from the plasma concentration-time plot by non-compartmental or two-compartmental analysis. In non-compartmental analysis, the elimination half-life of 10.4 hr and the area under the curve of 651.3 ng hr/ml were determined, and the maximal concentration (158.6 ng/ml) in the plasma was obtained at 0.56 hr post-dose. The developed method can be appropriate to apply pharmacokinetics and bioequivalence of clotiazepam.

• 한국통신학회논문지
• /
• 제22권11호
• /
• pp.2439-2450
• /
• 1997

디지털 자기 기록 채널의 기록 밀도가 증가하면 기록 채널의 비선형 왜곡이 발생하고, 이로 인해 PRML이나 DFE와 같은 디지털 검출 방식의 성능이 급격히 저하된다. 고밀도 기록을 저해하는 요소는 비선형 천이 이동과 부분 삭제로 분류되는데, 이 중 비선형 천이 이동은 사전 보상 기법에 의해 보상 가능하고, 부분 삭제 현상의 보상을 위해서는 정교한 비선형 동화 기법이 필요하다. 고밀도 기록을 달성하기 위해서는 이러한 비선형 왜곡과 관련된 파라메타의 정확한 추정이 매우 중요하다. 본 논문에서는 시간 영역에서 제안된 적응 알고리듬을 사용하여 위의 두 비선형 왜곡 영향을 분리할 수 있는 새로운 추정 기법을 논하고, 제안된 적응 방식으로 비선형 파라메타를 바이어스 없이 추정할 수 있음을 컴퓨터의 실험을 통해 확인하였다.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권6호
• /
• pp.286-292
• /
• 2005

Terahertz wave is a kind of electromagnetic radiation whose frequency lies in 0.1THz $\~$10THz range. In this paper, generation and detection characteristics of terahertz (THz) radiation by photoconductive antenna (PCA) method has been described. Using modern integrated circuit techniques, micron-sized dipole antenna has been fabricated on a low-temperature grown GaAs (LT-GaAs) wafer. A mode-locked Ti:Sapphire femtosecond laser beam is guided and focused onto photoconductive antennas (emitter and detector) to generate and measure THz pulses. Ultra-wide band THz radiation with frequencies between 0.1 THz and 3 THz was observed. Terahertz field amplitude variation with antenna bias voltage, pump laser power, pump laser wavelength and probe laser power was investigated. As a primary application example. a live clover leaf was imaged with the terahertz radiation.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2532-2537
• /
• 2005

FIR(Finite Impulse Response) filter is well known to be ideal for the finite time state-space model, but it requires much computation due to its inherent non-recursive structure especially when the measurement interval grows to a large extent. And often a fixed-lag smoother based on the finite time interval is needed to monitor the soundness of the system model and the measurement model, but the computation burden of FIR-type smoother imposes much restriction of its usage for real-time application. Conventional recursive forms of FIR estimator[1]-[4] could not be used for real time applications, since they are numerically unstable in their recursive equations. To cope with this problem, we suggest a stable recursive form FIR estimator(SRFIR) and its usefulness is demonstrated for designing the real-time fixed-lag smoother on the finite time window through an example of detection of rate bias in the anti-aircraft gun fire control system.