• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2009.10a
• /
• pp.777-778
• /
• 2009

• Journal of the Korean Society for Railway
• /
• v.10 no.4
• /
• pp.444-450
• /
• 2007

The bi-modal tram guided by the magnetic guidance system has two car-bodies and three axles. Each axle of the vehicle has an independent suspension to lower the floor of the car and improve ride quality. The turning radius of the vehicle may increase as a consequence of the long wheel base. Therefore, the vehicle is equipped with the All-Wheel-Steering(AWS) system for safe driving on a curved road. Front and rear axles should be steered in opposite directions, which means a negative mode, to minimize the turning radius. On the other hand, they also should be steered in the same direction, which means a positive mode, for the stopping mode. Moreover, only the front axle is steered for stability of the vehicle upon high-speed driving. In summary, steering angles and directions of the each axle should be changed according to the driving environment and steering mode. This paper proposes an appropriate AWS control algorithm for stable driving of the bi-modal tram. Furthermore, a multi-body model of the vehicle is simulated to verify the suitability of the algorithm. This model can also analyze the different dynamic characteristics between 2WS and AWS.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1717-1725
• /
• 2008

In this paper, the HILS system is proposed for the AWS ECU of the bi-modal tram. Using the HILS of the AWS ECU, the behavior of the vehicle can be predicted and the reliability of the AWS system also can be verified. The hardware part of the HILS system includes the ECUs, hydraulic systems, steering linkages and sensors of the bi-modal tram. The software part of the HILS system contains the virtual vehicle model and sensor emulation. Driver input conditions, such as vehicle velocity and front steering angle, are provided to the ECUs by the software. The driving simulation of the bi-modal tram is carried out by the HILS. Also, the reliability of the AWS system, including the ECUs and hydraulic systems, is verified.

• 한국ITS학회:학술대회논문집
• /
• 2008.11a
• /
• pp.311-316
• /
• 2008

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.99-108
• /
• 2007

The bi-modal tram guided by the magnetic guidance system has two car-bodies and three axles. Each axle of the vehicle has an independent suspension to lower the floor of the car and improve ride quality. The turning radius of the vehicle may increase as a consequence of the long wheel base. Therefore, the vehicle is equipped with the All-Wheel-Steering(AWS) system for safe driving on a curved road. Front and rear axles should be steered in opposite directions, which means a negative mode, to minimize the turning radius. On the other hand, they also should be steered in the same direction, which means a positive mode, for the stopping mode. Moreover, only the front axle is steered for stability of the vehicle upon high-speed driving. In summary, steering angles and directions of the each axle should be changed according to the driving environment and steering mode. This paper proposes an appropriate AWS control algorithm for stable driving of the bi-modal tram. Furthermore, a multi-body model of the vehicle is simulated to verify the suitability of the algorithm. This model can also analyze the different dynamic characteristics between 2WS and AWS.

• Proceedings of the KSR Conference
• /
• 2009.05a
• /
• pp.1828-1838
• /
• 2009

This study will analyze what is favorable of urban structure in order to introduce new transit system like bi-modal tram. As a reasonable transport mode in a city, the bi-modal tram needs to be considered with respect to the space structural pattern and city growth process. The result of this study may provide the basic resource that helps transport decision makers to decide how to introduce bi-modal tram by considering the urban structural characteristics. Also, the results that analyzed a functional characteristic of a bi-modal tram with a effective urban polices will be informative for practical use.

• Proceedings of the KSR Conference
• /
• 2007.11a
• /
• pp.1616-1625
• /
• 2007

Recently, embedded systems role as control systems instead of mechanical control systems in many parts of vehicles. In cases that embedded systems are used controling the electric signal, it is important to secure the reliability of a software within embedded systems. In this paper, the test platform for securing the reliability and real-time characteristic of the embedded system that controls electric signal of All Wheel Steering Control System in a Bi-modal tram is proposed. The platform is built on a HIL (Hardware In the Loop) architecture. Through the HIL platform, various vehicle conditions, driver activities and environment conditions can be successfully tested without actual driving, hence improving the reliability of the embedded system for the All Wheel Steering Control System.

• Proceedings of the KSR Conference
• /
• 2008.11b
• /
• pp.1231-1236
• /
• 2008

Since the bi-modal tram is too long so that the traditional steering system controlled only the first axle increases its turning radius, it is not suitable to the domestic road environment. In addition, it become hard to make fine parking with the traditional steering system. To resolve the problem, the bi-modal tram requires an all wheel steering system (AWS) that the second axle is controlled by the first axle's degree and the velocity of vehicle, and the third axle is steered by the articulation angle's degree and the velocity of degree. This paper addresses the factors for the AWS ECU design, the strategies to solve the problems, the core technologies for the implementation, and also the outcomes and analysis of the performance evaluation of implemented system.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1060-1066
• /
• 2008

Bi-modal tram is a new conceptual transit mean for public transportation integrating thoroughfare and railroad vehicle's characteristics together. This paper describes about a software design which will be applied to an automatic driving system, which is called NCS (Navigation Control System), considering such multiplicity of mechanical characteristic. The NCS adopts propulsion, braking, and direction control functions for a tram and utilizes various sensors to fully take control over such functions. In this paper, we defined and analyzed the capabilities of the NCS. Those capabilities are designed with a UML 2.0 based object-oriented modeling technique. Moreover, to ensure the complete operation of such capabilities, a communication protocol (which is capable of controlling sensors, propulsion, brakes, and traveling directions) is designed here. Throughout the paper, firstly, all the NCS related functions are discussed in accordance with the equipments they are belonged to; secondly the UML modeling application techniques for the defined functions and protocols for the communications between equipments are introduced; and lastly a validation process for the design specifications is going to be discussed.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.4
• /
• pp.91-98
• /
• 2014

In this study, the first and second electronically controlled cooling systems for a bimodal tram were developed. The performance characteristics of the cooling systems were assessed experimentally with actual and identical conditions, and a simulation was run using ANSYS Fluent. The results of the experimental and FEA method were standardized. In order to confirm the reliability of the experimental method, the experiment was carried out by a testing institution. The low-volume flow-rate condition was found to be better, but the cooling system performed in a minimal condition. Therefore, it is important to find the optimum performance levels. The cooling system equipment was revised to determine the optimized design parameters, after which the cooling performance levels increased at the radiation area. Specifically, with a greater fan diameter. Through this study, the newly developed cooling system will be reevaluated after being mounted on an actual bimodal tram. This will lead to a completely domestically produced bi-modal tram cooling system.