• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.60-60
• /
• 2010

1-D nanostructured materials have much more attention because of their outstanding properties and wide applicability in device fabrication. Bismuth oxide($Bi_2O_3$) is an important p-type semiconductor with main crystallographic polymorphs denoted by $\alpha-$, $\beta-$, $\gamma-$, and $\delta-Bi_2O_3$[1]. Due to its unique optical and electrical properties, $Bi_2O_3$ has been extensively investigated for various applications in gas sensors, photovoltaic cells, fuel cells, supercapacitors[2-4]. In this study, $Bi_2O_3$ NWs were grown by two step annealing process: in the first step, after annealing at $270^{\circ}C$ for 10h in a vaccum($3{\times}10^{-6}$ torr), we can obtain the bismuth nanowires. In the second step, after annealing at $300^{\circ}C$ for 2h in $O_2$ ambient, we successfully fabicated $Bi_2O_3$nanowires.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.14-15
• /
• 2010

Recently there has been growing interest in topological insulators or the quantum spin Hall (QSH) phase, which are insulating materials with bulk band gaps but have metallic edge states that are formed topologically and robust against any non-magnetic impurity [1]. In a three-dimensional material, the two-dimensional surface states correspond to the edge states (topological metal) and their intriguing nature in terms of electronic and spin structures have been experimentally observed in bulk Bi1-xSbx single crystals [2,3,4]. However, if we want to know the transport properties of these topological metals, high purity samples as well as very low temperature will be needed because of the contribution from bulk states or impurity effects. In a recent report, it was also shown that an intriguing coupling between the surface and bulk states will occur [5]. A simple solution to this bothersome problem is to prepare a topological metal on an ultrathin film, in which the surface-to-bulk ratio is drastically increased. Therefore in the present study, we have investigated if there is a method to make an ultrathin Bi1-xSbx film on a semiconductor substrate. From reflection high-energy electron diffraction observation, it was found that single crystal Bi1-xSbx films (0${\sim}30\;{\AA}A$ can be prepared on Si(111)-$7{\times}7$. The transport properties of such films were characterized by in situ monolithic micro four-point probes [6]. The temperature dependence of the resistivity for the x=0.1 samples was insulating when the film thickness was $240\;{\AA}A$. However, it became metallic as the thickness was reduced down to $30\;{\AA}A$, indicating surface-state dominant electrical conduction. Figure 1 shows the Fermi surface of $40\;{\AA}A$ thick Bi0.92Sb0.08 (a) and Bi0.84Sb0.16 (b) films mapped by angle-resolved photoemission spectroscopy. The basic features of the electronic structure of these surface states were shown to be the same as those found on bulk surfaces, meaning that topological metals can be prepared at the surface of an ultrathin film. The details will be given in the presentation.

• 한국전기전자재료학회논문지
• /
• 제16권11호
• /
• pp.1035-1040
• /
• 2003

High $T_{c}$ superconducting B $i_2$S $r_2$CaC $u_2$ $O_{8+d}$ (BSCCO2212) films were prepared by a metallorganic decomposition (MOD) method. The metal organic solution of BSCCO2212 was spin-coated on MgO (100) substrates at 3000 rpm for 1 min. To achieve a high critical current density, we controlled heat-treatment conditions and atmosphere. The films were annealed at temperature 75$0^{\circ}C$ ∼ 80$0^{\circ}C$ in $O_2$ or air. We obtained c-axis orientated BSCCO thin films on MgO substrates. The annealed sample at 77$0^{\circ}C$ with $O_2$ showed the critical temperature about 77 K and critical current denstity of 1.19 ${\times}$ 10$^{5}$ A/$\textrm{cm}^2$ about 13 K.

• Journal of Magnetics
• /
• 제11권3호
• /
• pp.108-110
• /
• 2006

We successfully enhanced the performance of a spin valve by inserting an ultra-thin layer of partially oxidized Fe in the pinned and free layers. With the exchange bias field kept large, the spin valve reached a GMR of 12%, which corresponded to a 55% increase in GMR when we compared it with that of spin valves without any inserted layer. The layer of partially oxidized Fe was more effective for improving the properties of the spin valve than the layer of partially oxidized $Co_{90}Fe_{10}$. Considering all the results, we can contribute the significant improvement to the combined effect of the modified local electronic structures at the Fe impurities and theenhanced spin-dependent reflections at the $\alpha-Fe_{2}O_{3} phase in the magnetic layer.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 춘계학술대회 논문집 반도체재료
• /
• pp.67-70
• /
• 2001

$SrBi_2Ta_2O_9$ thin films were etched at high-density $Cl_2/CF_4/Ar$ in inductively coupled plasma system. The chemical reactions on the etched surface were studied with x-ray photoelectron spectroscopy and secondary ion mass spectrometry. The etching of SBT thin films in $Cl_2/CF_4/Ar$ were chemically assisted reactive ion etching. The maximum etch rate was 1060 Am /min in $Cl_2$(20)/CF_4(20)/Ar(80). The small addition of $Cl_2$ into $CF_4$(20)/Ar(80) plasma will decrease the fluorine radicals and the increase CI radical. The etch profile of SBT thin films in $Cl_2/CF_4/Ar$ plasma is steeper than in $CF_4$/Ar plasma.Ā저會Ā저ﶖ⨀⡌ឫഀĀ᐀會Ā᐀㡆ﶖ⨀쁌ឫഀĀ᐀會Ā᐀遆ﶖ⨀郞ග堂瀀ꀏ會Āﶖ⨀〲岒ऀĀ᐀會Ā᐀䁇ﶖ⨀젲岒Ā㰀會Ā㰀顇ﶖ⨀끩Ā㈀會Ā㈀ﶖ⨀䡪Ā᐀會Ā᐀䡈ﶖ⨀Ā᐀會Ā᐀ꁈﶖ⨀硫Ā저會Ā저ﶖ⨀샟ගကĀ저會Ā저偉ﶖ⨀栰岒ఀĀ저會Ā저ꡉﶖ⨀1岒Ā저會Ā저Jﶖ⨀惝ග؀Ā؀會Ā؀塊ﶖ⨀ග㼀Ā切會Ā切끊ﶖ⨀⣟ගఀĀ搀會Ā搀ࡋﶖ⨀큭킢Ā저會Ā저

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2009년도 제40회 하계학술대회
• /
• pp.1248_1249
• /
• 2009

The $Sr_{0.7}Bi_{2.3}Nb_2O_9$(SBN) thin films are deposited on Pt-coated electrode(Pt/Ti/$SiO_2$/Si) using RF sputtering method with RF power and Ar/$O_2$ ratio. The size of grain of SBN thin films were increased with the increase of Ar/$O_2$ ratio and RF power respectively. Also, the crystallinity of SBN thin films were increased remarkably at RF power and Ar/$O_2$ ratio were 80[W] and 80/20, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.213-214
• /
• 2008

The $Sr_{0.7}Bi_{2.3}Nb_2O_9$(SBN) thin films are deposited on Pt-coated electrode(Pt/Ti/SiO2/Si) using RF sputtering method at various substrate temperature. The optimum conditions of RF power and Ar/O2 ratio were 60[W] and 70/30, respectively. The crystallinity of SBN thin films were increased with increase of substrate temperature in the temperature range of 100~400[$^{\circ}C$]. The capacitance of SBN thin films were increased with the increase of substrate temperature.

• 한국전기전자재료학회논문지
• /
• 제28권9호
• /
• pp.598-601
• /
• 2015

The $Sr_{0.7}Bi_{2.3}Nb_2O_9(SBN)$ thin films are deposited on Pt electrode($Pt/Ti/SiO_2/Si$) using RF sputtering method at various deposition temperature. The deposition temperature of optimum was $300^{\circ}C$. SBN thin films were annealed at $500{\sim}700^{\circ}C$ using furnace and RTA, respectively. The surface roughness showed about 2.42 nm in annealing temperature($600^{\circ}C$) of furnace. The capacitance density of SBN thin films were increased with the increase of annealing temperature. The maximum capacitance density of $0.7{\mu}F/cm^2$ was obtained by annealing temperature($700^{\circ}C$). The frequency dependence of dielectric loss showed about 0.03 in frequency ranges of 1~1,000 kHz.

• 한국진공학회지
• /
• 제14권4호
• /
• pp.215-221
• /
• 2005

비스무스와 텔루리움 타겟을 co-sputtering하여 열전특성을 지닌 비스무스 텔루라이드($Bi_2Te_3$) 박막을 제조하고, 증착온도에 따른 표면형상, 결정성, 그리고 전기적 특성의 변화를 조사하였다. 표면온도가 $290^{\circ}C$ 이상일 때, 박막의 표면에서 육각형상의 결정이 뚜렷이 관찰되었으며, X선 회절분석을 통하여 높은 증착온도에서 박막의 주된 구성물질이 rhombohedral 구조의 $Bi_2Te_3$ 결정상에서 hexagonal 구조의 BiTe 결정상으로 변하는 것을 확인하였다. 높은 증착온도에서 제조된 박막의 조성이 $Bi_2Te_3$의 화학양론비에서 벗어남으로 구조적 변화와 함께 전기적 특성도 변한다는 사실을 알 수 있었다. 제조된 비스무스 텔루라이드 박막의 열전특성을 파악하기 위해 제벡계수(Seebeck coefficient)를 측정하였다. 모든 시편이 n타입의 열전박막임을 확인하였으며, 증착온도 약 $225^{\circ}C$에서 열전특성의 최적값 (제벡계수: -55 $\mu$V/$K^{2}$, 열전성능인자: $3\times10^{-4}$ W/$k^{2}$m)이 얻어졌다. 그 이상의 온도에서 나타나는 열전 특성의 저하는 텔루리움의 증발에 따른 $Bi_{2}$$Te_{3}$ 열전박막의 텔루리움 함량 부족과 그에 따른 BiTe 결정상의 발생으로 이해된다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
• /
• pp.697-700
• /
• 2004

The SBT$(Sr_{0.8}Bi_{2.4}Ta_2O_9)$ thin films for semiconductor device were deposited on Pt-coated $Pt/TiO_2/SiO_2Si$ wafer by RF magnetron sputtering method at $400[^{\circ}C]$ and annealed at the temperature range from $600[^{\circ}C]$ to $850[^{\circ}C]$. The top electrodes(Pt) were deposited on SBT thin film by DC sputtering method. The crystallinity of SBT thin films were increased with increase of annealing temperature in the temperature range of $600[{\circ}C]\sim850[^{\circ}C]$. The annealing temperature properties were to be most excellent in the case of annealed SBT thin film at $750^{\circ}C]$. And, the maximum remanent polarization$(2P_r)$ and the coercive electric field$(E_c)$ at annealing temperature of $750[^{\circ}C]$ obtained about $11.60[{\mu}C/cm^2]$ and 48[kV/cm], respectively. Specially, it was seen that fatigue properties does not change in $10^{10}$ switching cycle.