• 제목/요약/키워드: Beta-mixture

검색결과 595건 처리시간 0.026초

다년생잡초(多年生雜草) 혼생답(混生畓)에 있어서 제초제(除草劑)에 의한 잡초방제(雜草防除) - 특(特)히 올미 우점답(優點畓)에서 초기처리제(初期處理劑)를 중심(中心)으로 - (Studies on Control of the Mixture of Annual and Perennial Weeds Emerged from Paddy Field - On the Pre-Emergence Treatment of Herbicides in the Paddy Field Dominated by Sagittaria pygmaea MIQ -)

  • 양환승;한성수;김종석
    • 한국잡초학회지
    • /
    • 제2권1호
    • /
    • pp.31-40
    • /
    • 1982
  • 일년생(一年生) 및 다년생잡초(多年生雜草)(특히 올미 우점도(優占畓)가 혼생(混生)한 기계이앙답(機械移秧畓 경식토(輕埴土))에서 제초제(除草劑)에 의한 효과적(効果的)인 잡초방제(雜草防除)를 하기 위하여 Naproanilide ${\alpha}$ (${\beta}$-naphthoxy) propionilide], Pyrazolate [4-(2, 4-dichlorobenzoyl)-1, 3-dimethyl pyrazol-5-yl-p-toluen-sulphnate], SL-49 [1, 3-dimethyl-4-(2, 4-dichlorobenzoyl)-5-phenacyloxy -pyrazol], Chlormethoxynil(2, 4-dichloropheny-4-nitro-3-methoxyphenyl), ACN (3-chloro-2-amino-1,4-naphthoquinone), Butachlor (2-chloro-2, 6-diethyl-N-butho xymethy1 acetanilide) 등 6 종(種)의 단제(單劑)와 이들과 butachlor와의 혼합제(混合劑)를 만들어 포장실험(圃場實驗)을 실시(實施)하였던 바 그 결과(結果)를 요약(要約)하연 다음과 같다. 1. 除草效果 1. 6종(種)의 각(各) 단제(單劑)로서 일년생(一年生)을 비롯하여 올미, 가래, 너도방동산이, 올방개 등 다년생(多年生)까지 동시(同時)에 만족(滿足)스럽게 방제(防除)할 수 있는 제초제(除草劑)는 없었다. 2. Pyrazolate, SL-49는 일년생(一年生) 대부분과 올미 및 가래에 대하여 탁효(卓效)가 있었다. 3. Butachlor 단제(單劑)는 일년초(一年草)에 대한 효과(効果)는 우수(優秀)하나 올미 및 가래에 대한 효과(効果)는 미약(微弱)하며 너도방동산이에 대한 효과(效果)도 만족(滿足)스럽지 못하였다. 4. Butachlor와 Pyrazolate의 합제구(合劑區)는 각(各) 단제(單劑)때보다도 살초폭(殺草幅)이 확대(擴大)되어 일년생잡초(一年生雜草) 전부(全部)와 올미, 가래, 너도방동산이까지도 만족(滿足)스러운 방제(防除)r 가능(可能)하였다. 5. Butachlor와 SL-49의 합제(合劑)도 Pyrazolate 합제(合劑)와 거의 동일(同一)한 경향(傾向)을 나타냈다. 6. Naproanilide 는 피에 대한 효과(効果)가 거의 없으며 올미에 대한 효과(効果)는 우수(優秀)하나 물달개비, 가래, 너도방동산이에 대한 효과(效果)는 충분(充分하지 못하였다. butachlor와 합제(合劑)로써 일년생잡초(一年生雜草) 및 올미에 대한 효과(効果)는 상승(上昇)하나 가래, 너도방동산이에 대한 효과(効果)는 불충분(不充分)하였다. 7. ACN은 공시(供試) 전초종(全草種)에 대하여 효과(効果)가 만족(滿足)스럽지 못하며 butachlor와의 합제(合劑)는 전반적(全般的)으로 제초효과(除草効果)는 상승(上昇)되었다. 8. Chlormethoxynil의 일년생잡초(一年生雜草)에 대한 효과(効果)는 우수(優秀)하나 너도방동산이에는 효과(效果)가 거의 없고 올미와 가래에는 초기억제(初期抑制)는 강력(强力)하나 그 이후(以後) 재생(再生)이 되었다. butachlor와의 합제(合劑)는 일년초(一年草)를 비롯하여 올미, 가래, 너도방동산이 등에 대한 효과(效果)가 상승(上昇)되고 효과(效果)가 더욱 지속(持續)되었다. 9. 공시제초제중(供試除草劑中(合劑包含)) 올방개에 유효(有效)한 제초제(除草劑)는 없었다. 2. 약해(藥害), 생육(生育) 및 수량(收量 공시제초제중(供試除草劑中 합제포함(合劑包含)) 모두 약해(藥害)는 경미(輕微)하였으며, 초기(初期)의 약간의 약해(藥害)도 경시적(經時的)으로 회복(回復)되어 이앙(移秧) 40일후(日後)까지는 거의 완전회복(完全回復)이 가능(可能)하였으며 실행구(實行區)에 비(比)하여 수량감소(收量減少)가 있었던 plot는 naproanilide 단제(單劑), ACN단제(單劑), Butachlor 단제구(單劑區) 등이었고 그 이외(以外)의 단제구(單劑區) 및 Butachlor와의 모든 합제구(合劑區) 등에 있어서의 수량(收量)은 실행구(實行區)와 유의차(有意差)가 없었다.

  • PDF

Low-temperature synthesis of nc-Si/a-SiNx: H quantum dot thin films using RF/UHF high density PECVD plasmas

  • Yin, Yongyi;Sahu, B.B.;Lee, J.S.;Kim, H.R.;Han, Jeon G.
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
    • /
    • pp.341-341
    • /
    • 2016
  • The discovery of light emission in nanostructured silicon has opened up new avenues of research in nano-silicon based devices. One such pathway is the application of silicon quantum dots in advanced photovoltaic and light emitting devices. Recently, there is increasing interest on the silicon quantum dots (c-Si QDs) films embedded in amorphous hydrogenated silicon-nitride dielectric matrix (a-SiNx: H), which are familiar as c-Si/a-SiNx:H QDs thin films. However, due to the limitation of the requirement of a very high deposition temperature along with post annealing and a low growth rate, extensive research are being undertaken to elevate these issues, for the point of view of applications, using plasma assisted deposition methods by using different plasma concepts. This work addresses about rapid growth and single step development of c-Si/a-SiNx:H QDs thin films deposited by RF (13.56 MHz) and ultra-high frequency (UHF ~ 320 MHz) low-pressure plasma processing of a mixture of silane (SiH4) and ammonia (NH3) gases diluted in hydrogen (H2) at a low growth temperature ($230^{\circ}C$). In the films the c-Si QDs of varying size, with an overall crystallinity of 60-80 %, are embedded in an a-SiNx: H matrix. The important result includes the formation of the tunable QD size of ~ 5-20 nm, having a thermodynamically favorable <220> crystallographic orientation, along with distinct signatures of the growth of ${\alpha}$-Si3N4 and ${\beta}$-Si3N4 components. Also, the roles of different plasma characteristics on the film properties are investigated using various plasma diagnostics and film analysis tools.

  • PDF

Effects of dietary enzyme cocktail on growth performance, intestinal morphology, and nutrient digestibility of weaned pigs

  • Kim, Yunkang;Baek, Jangryeol;Jang, Kibeom;Kim, Junsu;Kim, Sheena;Mun, Daye;Kim, Byeonghyeon;Kim, Younghwa;Park, Juncheol;Choe, Jeehwan;Song, Minho
    • 농업과학연구
    • /
    • 제44권4호
    • /
    • pp.513-518
    • /
    • 2017
  • Soybean, one of most widely used swine feed component in the world, contains non-starch polysaccharides (NSP). The digestive system of weaned pigs is not yet fully developed, and thus weaned pigs cannot easily digest diets based on corn and soybean meal. Dietary exogenous enzymes supplementation has been intensively investigated to assist digestion of anti-nutritional factors, such as NSP. This experiment was conducted to investigate the effects of dietary enzyme cocktail on growth performance, intestinal morphology, and nutrient digestibility of weaned pigs. A total 36 weaned pigs ($5.92{\pm}0.48kg\;BW$; 28 d old) were randomly allotted to 2 dietary treatments (3 pigs/pen, 6 replicates/treatment) in a randomized complete block design. The dietary treatments were a typical diet based on corn and soybean meal (CON) and CON with 0.05% enzyme cocktail (Cocktail; mixture of xylanase, ${\alpha}-amylase$, protease, ${\beta}-glucanase$, and pectinase). Pigs were fed their respective diets for 6 wk. Growth performance, morphology of ileum, apparent ileal digestibility (AID) and apparent total tract digestibility (ATTD) of dry matter, crude protein, and energy of weaned pigs were measured. No significant differences (p > 0.05) were observed for growth performance for the duration of the experimental period, and morphology of ileum, and nutrient digestibility between CON and Cocktail treatment groups. Therefore, the results from the current study indicated that enzyme cocktail supplementation in diets had no influence on growth performance, intestinal morphology, and nutrient digestibility of weaned pigs.

아연-고함유 효모 Saccharomyces cerevisiae FF-10 세포액의 항산화효과 (Antioxidative Activity of Zinc-Enriched Saccharomyces cerevisiae FF-10 in In vitro Model Systems)

  • 차재영;박보경;안희영;엄경은;전방실;조영수
    • 생명과학회지
    • /
    • 제19권2호
    • /
    • pp.179-184
    • /
    • 2009
  • 아연 고함유 효모 S. cerevisiae FF-10의 항산화능을 검토하기 위하여 DPPH 전자 공여능, linoleic acid을 이용한 ferric thiocyanate법과 TBA법에 의한 과산화지질 생성 정도 및 흰쥐 간 조직 생체막을 이용한 TBARS법에 의한 과산화지질 생성 정도를 측정하였다. 본 실험은 효모 생육배지인 YM 기본배지와 아연 생산량을 증대시키는 YM 최적배지에서 각각 배양된 S. cerevisiae FF-10의 세포 파쇄액의 항산화 활성을 비교하였다. DPPH 전자 공여능은 양성 대조구로 사용한 BHT에서 가장 높았고, YM 기본배지 보다는 YM 최적배지에서 배양된 FF-10 세포 파쇄액에서 항산화 활성이 높게 나타났다. 간 조직 생체막 과산화지질 생성 정도는 BHT > 최적 생산배지 > 기본배지 순으로 저해되었다. Linoleic acid를 이용한 과산화지질 생성정도는 음성 대조구에서 반응 1일째부터 급격히 증가한 후 반응종료일까지 계속 그 수준이 유지되었고, 양성 대조구인 BHT 처리구에서는 과산화지질 생성이 억제되어 높은 항산화활성이 확인되었으며, YM 기본배지 보다는 YM 최적배지에서 높은 과산화지질 생성 저해활성을 보였다. 이상의 결과에서 in vitro 항산화 실험계인 DPPH radical scavenging activity, 간 조직 생체막과 linolic acid 지방산을 이용한 ferric thiocyanate and TBARS 측정에서 항산화 활성은 양성 대조구인 BHT 보다는 낮았으나 최적배지에서 배양된 아연 고함유 효모 S. cerevisiae FF-10 균주의 세포 파쇄액에서 모두 높게 나타나 in vivo 항산화 실험계에서도 확인이 필요한 것으로 사료되어 진다.

상압소결(常壓燒結)한 SiC-$ZrB_2$ 전도성(電導性) 복합체(複合體)의 특성(特性)에 미치는 In Situ YAG의 영향(影響) (Effect of In Situ YAG on Properties of the Pressureless-Sintered SiC-$ZrB_2$ Electroconductive Ceramic Composites)

  • 신용덕;주진영;고태헌;이정훈
    • 전기학회논문지
    • /
    • 제57권11호
    • /
    • pp.2015-2022
    • /
    • 2008
  • The effect of content of $Al_2O_3+Y_2O_3$ sintering additives on the densification behavior, mechanical and electrical properties of the pressureless-sintered $SiC-ZrB_2$ electroconductive ceramic composites was investigated. The $SiC-ZrB_2$ electroconductive ceramic composites were pressurless-sintered for 2 hours at 1,700[$^{\circ}C$] temperatures with an addition of $Al_2O_3+Y_2O_3$(6 : 4 mixture of $Al_2O_3$ and $Y_2O_3$) as a sintering aid in the range of $8\;{\sim}\;20$[wt%]. Phase analysis of $SiC-ZrB_2$ composites by XRD revealed mostly of $\alpha$-SiC(6H), $ZrB_2$ and In Situ YAG($Al_5Y_3O_{12}$). The relative density, flexural strength, Young's modulus and vicker's hardness showed the highest value of 89.02[%], 81.58[MPa], 31.44[GPa] and 1.34[GPa] for $SiC-ZrB_2$ composites added with 16[wt%] $Al_2O_3+Y_2O_3$ additives at room temperature respectively. Abnormal grain growth takes place during phase transformation from $\beta$-SiC into $\alpha$-SiC was correlated with In Situ YAG phase by reaction between $Al_2O_3$ and $Y_2O_3$ additive during sintering. The electrical resistivity showed the lowest value of $3.l4{\times}10^{-2}{\Omega}{\cdot}cm$ for $SiC-ZrB_2$ composite added with 16[wt%] $Al_2O_3+Y_2O_3$ additives at 700[$^{\circ}C$]. The electrical resistivity of the $SiC-TiB_2$ and $SiC-ZrB_2$ composite was all negative temperature coefficient resistance (NTCR) in the temperature ranges from room temperature to 700[$^{\circ}C$]. Compositional design and optimization of processing parameters are key factors for controlling and improving the properties of SiC-based electroconductive ceramic composites.

A Study on Optimum Spark Plasma Sintering Conditions for Conductive SiC-ZrB2 Composites

  • Lee, Jung-Hoon;Ju, Jin-Young;Kim, Cheol-Ho;Shin, Yong-Deok
    • Journal of Electrical Engineering and Technology
    • /
    • 제6권4호
    • /
    • pp.543-550
    • /
    • 2011
  • Conductive SiC-$ZrB_2$ composites were produced by subjecting a 40:60 (vol%) mixture of zirconium diboride (ZrB2) powder and ${\beta}$-silicon carbide (SiC) matrix to spark plasma sintering (SPS). Sintering was carried out for 5 min in an argon atmosphere at a uniaxial pressure and temperature of 50 MPa and $1500^{\circ}C$, respectively. The composite sintered at a heating speed of $25^{\circ}C$/min and an on/off pulse sequence of 12:2 was denoted as SZ12L. Composites SZ12H, SZ48H, and SZ10H were obtained by sintering at a heating speed of $100^{\circ}C$/min and at on/off pulse sequences of 12:2, 48:8, and 10:9, respectively. The physical, electrical, and mechanical properties of the SiC-$ZrB_2$ composites were examined and thermal image analysis of the composites was performed. The apparent porosities of SZ12L, SZ12H, SZ48H, and SZ10H were 13.35%, 0.60%, 12.28%, and 9.75%, respectively. At room temperature, SZ12L had the lowest flexural strength (286.90 MPa), whereas SZ12H had the highest flexural strength (1011.34 MPa). Between room temperature and $500^{\circ}C$, the SiC-$ZrB_2$ composites had a positive temperature coefficient of resistance (PTCR) and linear V-I characteristics. SZ12H had the lowest PTCR and highest electrical resistivity among all the composites. The optimum SPS conditions for the production of energy-friendly SiC-$ZrB_2$ composites are as follows: 1) an argon atmosphere, 2) a constant pressure of 50 MPa throughout the sintering process, 3) an on/off pulse sequence of 12:2 (pulse duration: 2.78 ms), and 4) a final sintering temperature of $1500^{\circ}C$ at a speed of $100^{\circ}C$/min and sintering for 5 min at $1500^{\circ}C$.

Effects of SPS Mold on the Properties of Sintered and Simulated SiC-ZrB2 Composites

  • Lee, Jung-Hoon;Kim, In-Yong;Kang, Myeong-Kyun;Jeon, Jun-Soo;Lee, Seung-Hoon;Jeon, An-Gyun;Shin, Yong-Deok
    • Journal of Electrical Engineering and Technology
    • /
    • 제8권6호
    • /
    • pp.1474-1480
    • /
    • 2013
  • Silicon carbide (SiC)-zirconium diboride ($ZrB_2$) composites were prepared by subjecting a 60:40 vol% mixture of ${\beta}$-SiC powder and $ZrB_2$ matrix to spark plasma sintering (SPS) in 15 $mm{\Phi}$ and 20 $mm{\Phi}$ molds. The 15 $mm{\Phi}$ and 20 $mm{\Phi}$ compacts were sintered for 60 sec at $1500^{\circ}C$ under a uniaxial pressure of 50 MPa and argon atmosphere. Similar composites were simulated using $Flux^{(R)}$ 3D computer simulation software. The current and power densities of the specimen sections of the simulated SiC-$ZrB_2$ composites were higher than those of the mold sections of the 15 $mm{\Phi}$ and 20 $mm{\Phi}$ mold simulated specimens. Toward the centers of the specimen sections, the current densities in the simulated SiC-$ZrB_2$ composites increased. The power density patterns of the specimen sections of the simulated SiC-$ZrB_2$ composites were nearly identical to their current density patterns. The current densities of the 15 $mm{\Phi}$ mold of the simulated SiC-$ZrB_2$ composites were higher than those of the 20 $mm{\Phi}$ mold in the center of the specimen section. The volume electrical resistivity of the simulated SiC-$ZrB_2$ composite was about 7.72 times lower than those of the graphite mold and the punch section. The power density, 1.4604 $GW/m^3$, of the 15 $mm{\Phi}$ mold of the simulated SiC-$ZrB_2$ composite was higher than that of the 20 $mm{\Phi}$ mold, 1.3832 $GW/m^3$. The $ZrB_2$ distributions in the 20 $mm{\Phi}$ mold in the sintered SiC-$ZrB_2$ composites were more uniform than those of the 15 $mm{\Phi}$ mold on the basis of energy-dispersive spectroscopy (EDS) mapping. The volume electrical resistivity of the 20 $mm{\Phi}$ mold of the sintered SiC-$ZrB_2$ composite, $6.17{\times}10^{-4}{\Omega}cm$, was lower than that of the 15 $mm{\Phi}$ mold, $9.37{\times}10^{-4}{\Omega}{\cdot}cm$, at room temperature.

프로리포솜을 이용한 클렌부테롤의 경피흡수 제제화 (Proliposomal Clenbuterol Patch for Transdermal Delivery)

  • 이영주;정석재;이민화;심창구
    • Journal of Pharmaceutical Investigation
    • /
    • 제27권4호
    • /
    • pp.303-311
    • /
    • 1997
  • Proliposomal patch of clenbuterol, ${\beta}_2-agonist$ bronchodilator, was prepared and its feasibility as a novel transdermal drug delivery system was examined. Proliposomal granules containing clenbuterol was prepared by a standard method using sorbitol and lecithin with (Rx 2) or without cholesterol (Rx 1). The porous structure of sorbitol in the proliposomes was maintained allowing tree flowability of the granules. Following contact with water, the granules were converted probably to liposomes almost completely within several minutes. It indicates that proliposomes may be hydrated, when they are applied on the skin under occlusive condition in vivo, by the sweat to form liposomes. Clenbuterol release from Rx 1 and Rx 2 proliposomes to pH 7.4 isotonic phospate buffer (PBS) across cellulose membrane (mol. wt. cut-off of 12000-14000) was retarded significantly compared with that from the mixture of clenbuterol powder and blank proliposomes. Interestingly, proliposomes prepared with lecithin and cholesterol (i.e., Rx 2 proliposomes) showed much more retarded release of clenbuterol than proliposomes prepared only with lecithin (i.e.. Rx 1 proliposomes), indicating that clenbuterol release from proliposomes can be controlled by the addition of cholesterol to the proliposomes. Proliposomal patches were prepared using PVC film as an occlusive backing sheet, two sides adhesive tape (urethane, 1.45 mm thickness) as a reservoir for proliposome granules and Millipore MF-membrane (0.45 mm pore size) as a drug release-controlling membrane. Rx 1 or Rx 2 proliposomes containing 4.6 mg of clenbuterol were loaded into the reservoir of the patch. Clenbuterol release from the patches to pH 7.4 PBS was determined using USP paddle (50 rpm)-over-disc release method. Clenbuterol release from the proliposomal patches was much more retarded even than from a matrix type clenbuterol patch (Boehringer Ingelheim ltd). Being consistent with clenbuterol release from the proliposomal granules, the release from the patches was highly dependent on the presence of cholesterol in the proliposomes : Patches containing Rx 2 proliposomes showed several fold slower drug release than patches containing Rx 1 proliposomes. When the patch containing Rx 1 proliposomes was applied on to the back of a hair-removed rat, clenbuterol concentration in the rat blood was maintained during 6-72 hrs. Transdermal absorption of clenbuterol from the patch was accelerated when the patch was prehydrated with 50 ml of pH 7.4 PBS before topical application. Above results indicate that sustained transdermal delivery of clenbuterol is feasible using proliposomal patches if the cholesterol content and pore size of the release rate-controlling membrane of patches, for example, are appropriately controlled.

  • PDF

HPLC에 의한 산지별 한국산 석류과피 중 항산화화합물의 함량분석 (Quantitative Analysis of Antioxidants in Korean Pomegranate Husk (Granati pericarpium) Cultivated in Different Site)

  • 곽혜민;정현희;송방호;김종국;이진만;허종문;송경식
    • Applied Biological Chemistry
    • /
    • 제48권4호
    • /
    • pp.431-434
    • /
    • 2005
  • 한국산 석류 과피 중 주요 성분으로 함유되어 있는 ellagic acid와 punicalagin에 대한 HPLC 정량법을 확립하였다. 확립된 방법은 다음과 같다. 즉 column은 Agilent Zorbax Eclipse XDB-C18($4.6{\times}150mm,\;5{\mu}m$), 이동상은 1% formic acid를 포함하는 순수(A)와 1% formic acid를 함유하는 MeCN(B)을 이용하여(A) 용매가 5%에서 50분 후 100%가 되도록 농도기울기를 주어 용출하며, 이 때 유속은 0.8 ml/min., 검출은 UV 254 nm이다. 석류 과피 중 ellagic acid와 punicalagin 함량을 분석하기 위한 최적 전처리 추출조건을 확립한 결과, 100 ml의 95% ethanol로 5 g의 석류 과피를 3시간 환류추출한 경우 상기 항산화 화합물의 추출효과가 가장 좋았다. 확립된 최적 분석 조건을 이용하여 재배지가 다른 국내산 석류 과피 5종 중 함량을 조사한 결과 ellagic acid의 함량은 해평산이 $15.27{\mu}g/mg$으로 가장 높았으며, punicalagin의 함량은 장성산이 $16.21{\mu}g/mg$으로 가장 높았다. 한편 이들의함량은 산지별로 매우 큰 차이를 보여 한국산 석류피를 건강기능식품 등의 원료로 이용할 경우 산지의 선택이 매우 중요할 수 있음을 시사하였다.

Effect of Exogenous Fibrolytic Enzyme Application on the Microbial Attachment and Digestion of Barley Straw In vitro

  • Wang, Y.;Ramirez-Bribiesca, J.E.;Yanke, L.J.;Tsang, A.;McAllister, T.A.
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제25권1호
    • /
    • pp.66-74
    • /
    • 2012
  • The effects of exogenous fibrolytic enzymes (EFE; a mixture of two preparations from Trichoderma spp., with predominant xylanase and ${\beta}$-glucanase activities, respectively) on colonization and digestion of ground barley straw and alfalfa hay by Fibrobacter succinogenes S85 and Ruminococcus flavefaciens FD1 were studied in vitro. The two levels (28 and 280 ${\mu}g$/ml) of EFE tested and both bacteria were effective at digesting NDF of hay and straw. With both substrates, more NDF hydrolysis (p<0.01) was achieved with EFE alone at 280 than at 28 ${\mu}g$/ml. A synergistic effect (p<0.01) of F. succinogenes S85 and EFE on straw digestion was observed at 28 but not 280 ${\mu}g$/ml of EFE. Strain R. flavefaciens FD1 digested more (p<0.01) hay and straw with higher EFE than with lower or no EFE, but the effect was additive rather than synergistic. Included in the incubation medium, EFE showed potential to improve fibre digestion by cellulolytic ruminal bacteria. In a second batch culture experiment using mixed rumen microbes, DM disappearance (DMD), gas production and incorporation of $^{15}N$ into particle-associated microbial N ($^{15}N$-PAMN) were higher (p<0.001) with ammoniated (5% w/w; AS) than with native (S) ground barley straw. Application of EFE to the straws increased (p<0.001) DMD and gas production at 4 and 12 h, but not at 48 h of the incubation. EFE applied onto S increased (p<0.01) $^{15}N$-PAMN at 4 h only, but EFE on AS increased (p<0.001) $^{15}N$-PAMN at all time points. Prehydrolysis increased (p<0.01) DMD from both S and AS at 4 and 12 h, but reduced (p<0.01) $^{15}N$-PAMN in the early stage (4 h) of the incubation, as compared to non-prehydrolyzed samples. Application of EFE to barley straw increased rumen bacterial colonization of the substrate, but excessive hydrolytic action of EFE prior to incubation decreased it.