• Korean Journal of Food Science and Technology
• /
• v.14 no.3
• /
• pp.276-282
• /
• 1982

The UHT treatment and consequent storage effect on nutritional value of milk are discussed. Compared with the conventional sterilization the UHT treatment of milk represents a relatively small thermal stress. During UHT processing, nutritive value of protein, fat, carbohydrates, fat-soluble vitamins and minerals are generally unaffected. Nutritive value of some water soluble vitamins and protein are adversely affected in a small degree during storage. It has been recommended that UHT milk has best nutritional and organoleptic qualities on storage under refrigeration. Some unsolved future problems are also suggested.

• Journal of the Korean Society for Heat Treatment
• /
• v.23 no.2
• /
• pp.69-74
• /
• 2010

AlN thin films were deposited by using a two-facing-targets type sputtering system (TFTS), and their deposition characteristics, microstructure and texture were investigated. Total gas pressure was kept constant at 0.4 Pa and the partial pressures of nitrogen, $PN_2$ (($N_2$ pressure)/($Ar+N_2$ pressure)) varied from 0 to 0.4 Pa. The texture of the film cross-sections and surface morphology were observed by field emission scanning electron microscope (FE-SEM). The crystallographic orientation of the films were analyzed by X-ray diffraction (XRD). Deposition of AlN film depends on $N_2$ partial pressure. The best preferred oriented AlN thin films can be deposited at a nitrogen partial pressure of $PN_2$ = 0.52. As-deposited AlN films show preferred orientation and columnar structure, and the grAlN size of AlN films increases with increasing sputtering current.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.3
• /
• pp.122-126
• /
• 2006

In this study, composite materials were put to dry interfacial treatment by use of plasma technology It has been presented that the optimum parameters for the best wettability of the samples at the time of generation of plasma were oxygen atmosphere, 0.1 Torr of system pressure, 100 W of discharge power, and 3 minutes of discharge time. The decrease in surface potential of charged samples by corona discharge indicates that the amount of accumulated electrical charges reduces and the charges that have been injected lessen rapidly when the duration of UV irradiation increases. The surface resistivity and the tensile strength of plasma treated samples, a longer UV irradiation time resulted in decreased insulation.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.5 no.4
• /
• pp.31-38
• /
• 2002

The rate of sewage treatment in South Korea was 68% in the late 1999. Sewage treatment is mostly made near big cities such as Seoul and Busan, and it is little in rural areas. Wastewater from households goes to streams directly without treatment in rural areas and pollutes streams. It is necessary to improve the progress for treatment of nutrients such as N and P which cause eutrophication in streams and lakes, because sewage treatment system in South Korea focuses on treatment of basic organic matters. Therefore it will contribute to improve discharged water quality if small sewage treatment systems by aquatic plants and microbes are introduced to rural areas where are not connected to local sewage treatment facility. This experiment was conducted to find out the best way using aquatic plants and microbes to purify wastewater from households through individual sewage treatment system. Phragmites communis, Iris pseudoacorus, Acorus calamus var. angustatus, Typha orientalis and Oenanthe javanica were used for this experiment. BOD, COD, SS, T-N and T-P were analyzed following standard methods for wastewater. The result shows that wastewater was roughly purified through pebbles and sands, and highly purified through aquatic plants and microbes especially in T-N and T-P. Iris pseudoacorus is the most effective in reduction of COD and BOD level. This system will work even in winter when plants die because microbes will be still working.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.15 no.4
• /
• pp.265-273
• /
• 1995

Seeds of chicory were collected and selected with good germination, emergence and productivity. To develop chicory as a new forage crop seeds were primed with polyethylene glycol (PEG 6000) and coated with some chemicals, and tested in laboratory and field. The results obtained are summarized as follows: 1. Among the seed lines collected, PUlgAH, PU21TH, PU37CH and PU30TK were germinated more quickly and took less time for germination than the others. 2. PUI8AH was the best in emergence and growth although PU21TH showed superior germinative ability among the lines collected. 3. Chicory seeds primed with 20~25% PEG solution for three days at $10^{\circ}C$, or the seeds treated with 25% PEG solution at $15^{\circ}C$ regardless the treatment period showed good germination performances. 4. Osmotic priming with PEG accelerated the germination of chicory, but not in the field. 5. Coated seeds geminated more slowly in Petridishes but showed superior emergence and growth to those of primed or untreated seeds. Treatment 3 showed the best performances in pot experiment. 6. Coated seeds showed remarkable increase in establishment and dry matter yield especially in sod sowing compared to the other sowing method. 7. Most nutrient contents except iron and manganese of chicory were much higher than those of mixed pasture .

• Food Science and Preservation
• /
• v.13 no.5
• /
• pp.563-568
• /
• 2006

The properties of mung bean were investigated depending on hydrolysis condition. The results showed that enzyme treatments (${\alpha}$-amylase and protease each at 0.1% (w/w)) by varying hydrolysis temperature showed better properties than non-pretense treatment (control group). The treatment with 0.08% ${\alpha}$-amylase was best for optimum hydrolysis of mung bean starch The treatment using a mixture of 0.08% (w/w) ${\alpha}$-amylase and 0.12% (w/w) protease was best for optimum hydrolysis of meg bean protein. The effects of Hydrolysis time of mung bean showed that the optimum time was 60 and 90 min and there fore the optimum time was set at 60 min. These result showed that the best hydrolysis conditions of mung bean were the treatment at $60^{\circ}C$ for 60 min using a mixture of 0.08%(w/w) ${\alpha}$-amylase and 0.12% (w/w) pretense, with the sugar level shown at $5.8^{\circ}Brix$, reducing sugar at 2,022.13 mg% and crude protein at 7,666.17 mg%.

• Membrane and Water Treatment
• /
• v.11 no.4
• /
• pp.313-321
• /
• 2020

ACF preparation from different materials and its application in constructed wetlands for wastewater treatment has been focused in environmental field. Different materials have been used to prepare ACF around the world. This study aims to prepare, characterize and use of ACF from loofah for removal of Tetracycline from water through composite vertical flow constructed wetlands. ACF was prepared and it was tested for characterization, later it was used for removal of Tetracycline from water through composite vertical flow constructed wetlands. In composite vertical flow constructed wetlands, three HRTs were set according to the experiment, 1D, 2D, and 3D is individually. Samples were transported immediately from collection point to laboratory for analyzing. Samples were measured for Tetracycline (TC), Total Phosphorus (TP), and Total nitrogen and COD. Tetracycline absorbance with respective 356nm was obtained good and HRT is important factor. Results show that composite vertical flow constructed wetlands with ACF from luffa is best option and it is recommended to study further deep analysis.

• Journal of Sericultural and Entomological Science
• /
• v.44 no.2
• /
• pp.74-81
• /
• 2002

The optimal conditions for mycelial growth of P. linteus ASI 26011 were 25-30$^{\circ}C$ and pH 6.0, respectively. The mycelial growth of P. linteus was excellent on MCM medium. In case of carbon sources, the mycelial growth of P. linteus was best on the culture media that were contained with sucrose, mannose and glucose. Potassium nitrate and sodium nitrate were good for the mycelial growth of P. linteus as a nitrogen source. For comparison of the mycelial colonization of P. linteus on logs, several techniques of inoculation were tested; the sterilized short log inoculation, drilling inoculation and log-end sandwich inoculation. The mycelial colonization of P. linteus on logs was good in the treatment of sterilized short log inoculation, but poor in the traditional methods such as drilling inoculation and log-end sandwich. The initial mycelial growth and the full mycelial colonization of P. linteus were the best on 20 cm logs under the condition of 42% of moisture content in log. Also the initial mycelial growth of P. linteus was accelerated over 12 hours of sterilization. Burying method of logs after 5-6 months of incubation was the best for formation of basidiocarp of P. linteus. The formation of fruiting body of P. linteus was quite good in the cultivation house at the 31-35$^{\circ}C$ and over 96% of relative humidity.

• 한국초전도학회:학술대회논문집
• /
• v.9
• /
• pp.352-357
• /
• 1999

The Cu sheets were selected for the substrate of the superconductor films. Pure Cu sheets with the thickness of 50${\mu}$m were fabricated using hot and cold rolling. The Cu sheets were heat treated to induce the biaxial texturing. The z-axis and x-y plane texturing of Cu sheets heat treated at different conditions were analyzed using XRD and a best heat treatment condition for the texturing was selected. ZrO$_2$ film was dip coated on Cu sheets heat treated at the best condition to prevent possible reaction between Cu sheets and YBCO superconductors, to reduce possible cracking due to thermal expansion mismatch and to decrease the lattice mismatch for biaxial texturing. The texturing of the oxide buffer layers were also studied.

• Journal of the Korean Wood Science and Technology
• /
• v.9 no.3
• /
• pp.16-23
• /
• 1981

This study has been carried out to make a comparative study for the adhesive control methods specifically developed for application to formaldehyde. The method for formaldehyde determination used in this report is the improved chromo tropic acid determination. The results are summarized as follows: 1. The soaking treatment in aqueous solution of urea wok the most scavenging effect on the formaldehyde release from a plywood sample glued with a urea formaldehyde adhesive, and other removal treatment such as resorcinol, albumine-, and hardener-treatment gave significant reduction too. 2. In glue shear strength of dry test, 2% of resorcinol treatment and soaking treatment showed the highest strength and all the other treatment met the standard, but in hot water soaking test, 2% of resorcinol treatment gave the best results, on the other hand, adding the hardener showed the lowest strength and failed in meeting the standard. 3. Air dried moisture content of all treated plywood met the standard which calls for 13% or bellow. 4. In this comparative study, we can make a strong combination each other or go into the details of one treatment for the best result through the more study.