The Transactions of the Korean Institute of Electrical Engineers C (대한전기학회논문지:전기물성ㆍ응용부문C)

The Korean Institute of Electrical Engineers (대한전기학회)
권호 표지

A Study on the UV Degradation Characteristics of FRP by Plasma Surface Modification

플라즈마 표면개질에 따른 FRP의 자외선 열화 특성에 관한 연구

  • Published : 2006.03.01
Download PDF
⟨ Previous Next ⟩

Abstract

In this study, composite materials were put to dry interfacial treatment by use of plasma technology It has been presented that the optimum parameters for the best wettability of the samples at the time of generation of plasma were oxygen atmosphere, 0.1 Torr of system pressure, 100 W of discharge power, and 3 minutes of discharge time. The decrease in surface potential of charged samples by corona discharge indicates that the amount of accumulated electrical charges reduces and the charges that have been injected lessen rapidly when the duration of UV irradiation increases. The surface resistivity and the tensile strength of plasma treated samples, a longer UV irradiation time resulted in decreased insulation.

Keywords

References

  1. R. Yosomita, K. Morimoto, A. Nakajima, Y. Ikada, T. Suzuki, 'Adhesion and Bonding in Composites', Marcel Dekker Ince., pp. 109-147, 1989
  2. K. L. Mittal, 'Effect of pH of Silane Solution on the Adhesion of Polyimide to a Silica Substrate', Journal of Applied Polymer Science, Vol. 29, pp. 2039-2043, 1984 https://doi.org/10.1002/app.1984.070290612
  3. W. Jhonson and S. K. Ghoshm, 'Some Physical Defects Arising in Composite material Fabrication', J. of. Materials Sci., Vol. 16, pp. 285-301, 1981 https://doi.org/10.1007/BF00738617
  4. Chih-hao Yang, Shih-chin Lee, Jun-ming Wu, Tien-chai Lin, 'The properties of copper films deposited on polyimide by nitrogen and oxygen plasma pre-treatment', Applied Surface Science, Vol. 252, Issue. 5, pp. 1818-1825, 2005 https://doi.org/10.1016/j.apsusc.2005.03.182
  5. Meng-Jiy Wang, You-Im Chang, F. Poncin-Epaillard, 'Illustration of the interface between N2/CO22 plasmas and polystyrene surface', Surface and Interface Analysis, Vol. 37, Issue. 3, pp. 325-331, 2005 https://doi.org/10.1002/sia.2024
  6. C.K. Jung, I.S. Bae, Y.H. Song, J.H. Boo, 'Plasma surface modification of TiO2 photocatalysts for improvement of catalytic efficiency', Vol. 200, Issues. 5-6, pp. 1320-1324, 2005 https://doi.org/10.1016/j.surfcoat.2005.07.097
  7. 임경범, 최훈영, 이석현, 이덕출, '플라즈마 처리된 PET 필름의 표면분석에 관한 연구', 전기학회논문집, 제53C권, 12호, pp. 596-600, 2004
  8. 임경범, 이덕출, '플라즈마 표면처리에 따른 고분자절연 재료용 유리섬유의 표면개질', 전기학회논문집, 제52C권, 5호, pp. 206-212, 2003
  9. N. Dilsiz, E. Ebert, W. Weisweiler, G. Akovali, 'Effect of Plasma Polymerization on Carbon Fibers Used for Fiber/Epoxy Composites', Journal of Colloid and Interface Science, Vol. 170, pp. 241-248, 1995 https://doi.org/10.1006/jcis.1995.1093
  10. S. Halim Hamid, Mohamed B. Amin, Ali G. Maadhah, 'Handbook of Polymer Degradation', Marcel Dekker, pp. 3-27, pp. 219-261, 1992
  11. L. Cui, J. Jiang, Z. Xia, G. Chen, and Z. Wang, 'Charge storage and transport in polymethylmethacrylate (PMMA) film', J. Electrostatics, Vol. 44, pp. 61-65, 1998 https://doi.org/10.1016/S0304-3886(98)00023-0
  12. J. Larrieu, B. Held, H. Martinez, Y. Tison, 'Ageing of atactic and isotactic polystyrene thin films treated by oxygen DC pulsed plasma', Surface and Coating Technology, Vol. 200, Issue. 7, pp. 2310-2316, 2005 https://doi.org/10.1016/j.surfcoat.2004.06.032